Find experienced local carpenters in South East Melbourne

2.4 m high joinery door with 4 hinges. Top two hinges broken. But I donot mind to replace all the four hinges if that works better. Hinges need to allow the door open more than 90deg.

Need my cupboards and existing joinery rewrapped as well as a pantry door. Also need two new benchtops wrapped. I’m looking for someone with experience. I have the wrap colours chosen out

Need to get few things done but starting with fixing a gap with screwing a flat white timber

I need a professional installer to assemble prefabricated banquette seating base on site, you would need to glue brass laminate on kicker face on site. Curved banquette slit into 8 sections. Kicker and seat base a separate frames. I can provide all tools, if needed, including spray guns and contact adhesive, screws, etc. Please note, the offer is rate per hour. Scope of work, hours are subject to agreement.

Need to twist it so it clears the joinery, and then flexi hose it to the new oven connection.

We’re looking for experienced joinery installers or cabinet makers to help assemble and install several large, pre-made pieces in an office setting. Scope of work includes: 1. L-shaped cabinets Two sets: • 3.3 m (H) × 5.4 m (W) • 3.3 m (H) × 3.3 m (W) Most carcasses are pre-assembled; only sections 6 & 10 are flat-packed (see attached photo for reference). 2. 3 × bookcases Carcasses pre-assembled but split into two parts each. 3. 1 × glass-door cabinet Carcass assembled; glass doors need installation. 4. 3 × desks Drawers and cabinets pre-assembled, require installation only. Additional Details: All materials are supplied. Taskers must bring their own tools, dolly and ladder. Some cabinets include LED lighting, which will need to be connected and working. The site is tight and currently filled with cartons. Items (2, 3 & 4) need to be carried up to Level 1 — if some units don’t fit the stairs, partial disassembly may be required. This is not a one-person job due to cabinet size and weight — ideal for 2-4 installers. Realignment of doors may be required after installation to ensure proper fit. Packing and removal of rubbish from the site is required after completion. No installation manual is available, so an experienced joinery installer is preferred. Quoting Instructions I prefer an hourly rate quote since the total workload may vary. Please let me know your rate per hour, estimated total hours, and whether you’ll be working alone or with a second person. I’m happy to adjust the total payment after completion based on the actual time required.

Rain water drainage join plastic socket replacement. Plastic joint that connect gutter pipe to ground drainage pipe is broken it needs new join socket. Please see the picture.

Join glass and wood cabinet

I’m looking to have a few custom shelves made for displaying alcohol. The original plan was to have them fully recessed into the wall, but this section of wall was previously an external wall, so there isn’t quite enough depth. Based on my measurements, I should have around 60–80mm of recess space, which is still fine for the design. The wall is built into solid concrete with a double brick backing, so I’m confident we can cut or adjust a couple of studs and noggins without compromising structural integrity. For the shelves, I’d like: A black, gloss-finished recessed box (not sure of the exact material — I’ve heard of Polytec but open to suggestions) A thin, inexpensive backing, as I plan to mount tempered glass at the back of the shelves (behind the bottles), but not at the front like in the reference image LED - Somehow get LED'S to work with it seamlessly. Strong support — even with the partial recess, the shelves should be able to hold weight without issues I also have a few different size options we could consider depending on the expertise and approach of the person taking on the job. I’m really just looking to work with someone who’s interested in the project and can bring it to life.

Joinery & Build Scope Budget: around $12,000. Happy to discuss and negotiate. Business & Liability Insurances required 1. Demolition • Remove one internal non-load-bearing wall (as per layout) • Remove 1 internal doors (same wall) 2. Frame Carpentry • Construct new MDF walls (e.g. for waxing room) • Supply and install all required framing hardware • Elevation for pedicure, 4 meter L, 1.2m deep and 40cm H, from of the stage 3 drawers equally divided and next to each drawer space for electric socket. The stage should be strong enough to support 3 people sitting plus the chairs Need to do plumber rough in before finalising 3. Plastering • Supply and install plasterboard for new walls • Patch and repair existing walls as needed • Install cornices (e.g. 90 mm Scotia or similar) 4. Joinery • Install kitchen base cabinet (Bunnings-supplied) • Install basin vanity cabinet (Bunnings-supplied) • Tile splashback installation for kitchen and vanity • Install shelving units (approx. 4 lm, 32 mm shelves) (Ikea / Kmart - Supplies) • Construct partition column wall 5. Fixing Carpentry • Fit internal swing door (1) • Install passage sets and door hardware • Install door architraves (67 × 18 MDF profile) • Install skirting boards (92 × 18 MDF, approx. 36.9 lm) 6. WPC Cladding (Or similar wallpaper) Installation • Indoor WPC cladding panels (1 wall) Outdoor signage installation Mhs M

Would love a quote And estimated time frame to complete

Need to re-assemble the wall joinery in my garage, which may require some adjustments to fit the garage layout. All the assembled pieces are in place. I’m looking for someone with the right carpentry skills to complete the installation. Additionally, I need to install 2-3 shelves in one of the rooms. below is the pic how it was earlier and would need to be re-assemble in same order.

Missing a t joiner for a vuly ultra trampoline

Hello, We are from Oscar Wylee We need to fixing the damages for the wall display shelves in one of our stores. Please send us a quote for the repair with the scope.

Blind joiner need to be fixed So it can be opened fully

Joinery for shop fit out to be installed. Joinery is already assembled. Required a carpenter to set in place.

Newly installed joinery requires caulking. Caulking around new wardrobe units at the ceiling and where units meet wall.

I would like to custom build 4 to 5 custom build tables for our office space. I want the tables to be finished in a white gloss sitting on wheels.

Need a loose joinery of an accent chair fixed. It was dislodged during delivery. Would require an ABN.

Need to replace a mirrored lighting box in a shop in Chadstone, SOW: - Remove existing mirror box - Manufacture new one as per drawing (It will need a site measure completed Monday next week at the latest) - Install new mirror box - Caulk edges if required - Due date: Flexible