Find experienced local carpenters in West Melbourne

Need carpenter to cut and do two mason mitre joins and cut bench tops to length

Alter my cabinet to meet the minimum height clearance from stove to rangehood. It needs to be put up 5cm more from its current height. The new rangehood must be installed as well to make sure its well fitted and properly working. My current unit is re circulating rangehood and plug and play. Certificate must be issued as well.

Looking for a professional cabinet maker to make garage storage cabinets with black trimmed sliding doors. Refer to the attached photo for the design. Measurements 4m x 2.4m

I need carpenter to put 2 stud walls and install 3 standard doors, material are provided

Looking for someone to build and install a storage unit or cabinets to fit neatly against a brick wall. From the jasper panel to the hot water system is the length.Seeking a quality finish and practical storage solution. 185cm width 80cm depth 242 cm height. See actual image and a mark up image of the sort of what we are looking for

The wooden frame of the window looks decomposed, needs fixing.

Need a carpenter to repair a cavity sliding door. It’s still functional, but it’s becoming tight to operate and has some wobble when opening and closing.

Looking for an experienced floor sander to sand and refinish approx 70 m² of timber flooring (living + dining) in a two‑bed apartment in Melbourne. Goal: bring floors up to rental standard (durable, even finish, safe for tenants). Scope: - Sand the whole area (approx. 70 m²), including edges - Repair minor issues (nail pops, small gaps, replace/secure loose boards if needed) — please note major replacements will be quoted separately - Fill and prepare joints/holes, tidy jump/transition strips - Apply stain if requested (note any colour options) and 2 x coats of high‑traffic, water‑based polyurethane (or advise best durable finish for rental) - Clean up and remove dust; minimise dust (dust‑extraction preferred) - Leave site ready for tenants (no strong lingering odours) Location & access: Altona North, ground-floor apartment Timing: - Preferred start date: 5th July 2026 - Please include estimated days on site and drying times

Two old standard 820 x 2040 doors to be replaced with new ones. Two existing doors to have existing door handles swapped over to new ones. Ideally would like done Sunday but can be done anytime up to Tuesday.

Hello my dog bit the skirt wall board and needs to be filled/patched up and painted

Looking for someone experienced with wall mounting to install a timber entryway organiser shelf from Welds & Wood. Details: Approx. 1 metre wide timber shelf with coat hooks. To be installed on an internal plasterboard wall. Plasterboard fixings (pictured) have already been supplied by the manufacturer. Shelf has rear timber mounting rails as shown in photos. Installer to provide own tools (drill, level, stud finder if required, etc.). Must ensure shelf is level, secure and suitable for hanging coats, bags and keys. Location: West Footscray VIC Preferred: Experience mounting shelves, cabinetry, mirrors or similar wall fixtures. Please advise if additional fixings are recommended after inspection. Photos attached showing: Organiser shelf Supplied plasterboard fixings Rear mounting arrangement

need assistance for 30min to help hold joinery in place while I screw it to the kitchen wall above rangehood.

I need a small wooden stand 25mm wood, 100mm high legs 300mm length and width 200mm with a routed area in the middle that can take a display , will provide .DXF file for routinng of the display

need someone to enlarge an existing hole in a kitchen cabinet for a dishwasher hose/filter to pass through. The filter is about 10 cm wide, and the cabinet panel/opening depth is about 3.5 cm. Existing hole is smaller, so it needs to be enlarged neatly into a larger round or oval opening. Please bring the right tools, such as a hole saw, jigsaw, or oscillating multi-tool. Power cable and hoses will be removed before cutting. Need edges smoothed after cutting so they do not damage the hose.

Stain on carpet that can’t be removed, looking to replacement stained section with spare carpet we have in storage.

A freshly installed pergola needs painting. It needs 2 coats. Paint will be provided.

I need an experienced cabinet maker or carpenter to modify an existing laundry cupboard door setup. Currently there is a 2-panel folding door (231cm height x 106cm total width). I would like this converted into 4 separate doors with proper hinges and handles installed. Scope of work: • Convert folding doors into separately mounted doors • Cut doors into the following sizes: 2 doors at 105cm height 2 doors at 126cm height • Install 5 hinges on the left hand panel • Drill required holes and reposition hinges where needed • Install pull handles on the two 105cm doors (handles supplied) • Ensure doors align correctly and open smoothly Measurements: Existing door size: 231cm height x 106cm width Final configuration: 2 x 105cm doors 2 x 126cm doors Notes: • Right hand door is already mounted and only requires cutting • Left hand panel requires cutting and hinge installation • Handles supplied • Please bring your own tools Photos show the current cabinet and hinge positions. Looking for someone experienced in cabinetry to ensure a clean, professional finish. Send your quote.

I have a walk in wardrobe space which is open with no cupboards. Will need help building shelves to maximise the space.

My wall cabinet came down when I moved the fridge and it needs to be screwed on with a few brackets . It’s very heavy and currently being held by 2 poles