Find experienced local carpenters in South East Melbourne

Need a carpenter for a job in the laundry, specifically for installing a new cabinet on the wall. See the drawing in the attached image.

Need a carpenter or cabinet maker or anyone with adequate experience to help on call in building this home sound proof booth (see attached). I have already decided on design, general measurements, insulation materials etc but need some advice on paints, finishing, screws and joints etc. Job will be mostly just video calls. This first one is a 45 minute call. Can do more after that if needed

I need to dismantle a kitchen cabinet from a kitchen and install it into another kitchen.

Build a 2 shelve cabinet, I have the doors with hinges. Size of the doors are 720mm x 300mm. The width of the cupboard has to be 450mm deep. White melamine only

1. Light sanding of new doors to remove loose bits of timber so the door is smooth and wood grain is shown. Clean any stickers or unintended items on the doors. 2. Stain three doors and one new frame (at least two (2) coats of stain for each door) 3. Only one solid door to be stained 4. Two other doors have glass in the middle to be stained - less surface area 5. One new door frame to be stained 6. One old door frame requiring minor black paint touch ups 7. Caulking required around the new door frame - inside and outside on all the gaps. Outside around the doorframe has been filled with expansion foam, just need to sand off loose bits of foam and caulking to go over the foam around the frame for aesthetics. Need white, grey and black caulking materials. 8. Quote should include all labour and materials (ie mainly caulking, some minor fillers, minor touch ups and black paint for minor door frame touch ups), except for the black staining paint for doors and white paint for surrounding. 9. Black staining paint and all white paint for architrave - door frame border, supplied by us. 10. All doors have some level of shelter from direct rain ie from Pergola or porch. Existing. 11. All door fixtures and fittings like handles, smart locks, marble handle, etc need to be protected from stain / paint. #Description above updated to be clearer

1)Looking for someone who can replace the existing doors(8), drawers(4) and side trims etc with new 2 pac ones. Happy to keep the shape and size of kitchen as is and looking to replace items that’s visible when all doors are closed. 2) Would appreciate a separate quote to install 2-3 new modern matching overhead cabinets on either side of range hood. Approximate measurements in cm. 4 x Drawers - 18 * 40 1 Cupboard - 50 * 72 5 Cupboards - 40 * 72 2 Cupboards - 30 * 72

Hi, I need 4 kitchen cabinets supply and installed matching existing scheme. Dimensions are as follows: # 2 cabinets above stove next to rangehood on either side: 530 (w) x 500 (d) x 780 (h) # 2 cabinets above fridge: 500 (w) x 500 (d) x 430 (h) Providing images of the site and also scheme of existing cabinets. Happy to answer any questions or discuss this further

Need to replace the wardrobe doors with sliding doors. Add drawers inside and at the top shelf include another shelf. There are 2 rooms wardrobe as per the photos attached. Room 1: 3m width x 2.5m height Room 2: 2.2m width x 2.5m height The drawers inside to be 3 and 4 drawers with height to be 70cm. There will be 6 of the drawer sets.

Small Kitchen. level cabinets Install side and end panels. Pin to walls. Install benchtop and cut out for sink and stove top. Install kickboards. All cabinets already assembled and doors installed.

Looking for quotes to sand and stain deck - approx 7 x 3 meters. Items on deck will be moved prior to arrival

Check in 45mm x 240mm in existing studs then fit 240mm beam. Then jackstud either end. All materials supplied

Looking for creative carpenter who can build new TV unit, in some classic designs. photos attached. Hight of celling 2740mm (9"), Width 5370mm This task is to share few designs and quotations. Please share previous work done with photos. Note - This is new house, I also want to do few more stuff such narrowing doorway for privacy etc..but it will be seperate.

I need 6 internal doors and 1 linen closet door replaced with stanford style doors. The existing door jambs are in place and in good condition. The job includes: • Removing and disposing of 6 existing internal doors and 1 linen closet door • Supply and Installing 6 new standard internal doors • Supply and Fitting new hinges, handles with privacy pin locks, strike plates and all required hardware • Ensuring all doors open, close, and latch smoothly • Cleaning up work area after installation • Doors should be properly aligned and neatly fitted into existing frames • Old doors and any leftover material must be taken offsite and responsibly disposed of Existing door dimensions Master Bed Door - 810 X 2020 Ensuit Door - 720 X 2040 Bed room 2 - 810 X 2020 Bed room 3 - 810 X 2020 Bed room 4 - 820 X 2040 Bathroom door - 760 X 2020 linen closet door - 680 X 2020

Replace stained toilet seat Will pay cost of deat separately

There is a small water leak from the roof which has resulted in the water staining the plasterboard. Only issue is the leak is directly under the solar panels so ideally i need someone to go in the roof and seal it from the inside.

Pantry door, approx 2.5m high, with 5x hinges. 4x have screw fixings that have sheared off and threads are stuck in the door.

Need help handing an ikea wall mounted cabinet. Have tried and failed. Ive also run out of wall plugs to screw the bracket into the wall so someone who has a few of these already would be great.

Need merbau deck, stairs and wall sanded , cleaned and stained

Need to sand and restraining 4.4 x 7.5 deck and 2 coats

Build a 3 piece sun Lounge outdoor day bed. With frame and canopy. Can be built inside under aircon then carried out the back. (If the day is hot) Features Modular design offers versatile setups 0-90 Folding canopy UV-resistant frame with water-resistant cushion Heavy duty galvanised steel frame Comes with 7cm thick high density foam seat cushion Removable and washable cushion cover Specifications: Frame material: Galvanised steel Canopy material:Polyester Frame Canopy Seat cushion thickness: 7cm Lounge max. weight capacity: 120kg/unit Overall dimensions: 161cm x 180cm x 145cm Assembly required: Yes No. of package: 3 Package Content Gardeon Outdoor Day Bed x1 Assembly Manual x1