Find experienced local carpenters in West Melbourne

Need the wooden pails nailed/screwed back to the fence posts so they don't fall off again

Looking for quotes on the installation of cabinets for an entire house; Kitchen, pantry, Laundry, 4 bedrooms, Linen, storage. Product has been custom made by a good quality Chinese manufacturer. This a labour only job. Works to start almost immediately

Remove the exiting canopy Supply and install new canopy

Kitchen currently has no dishwasher installed — a base cabinet occupies the space where one should go. Electrical provision for a dishwasher is already in place. Scope of work: Remove the existing base cabinet/cupboard section to create space for the dishwasher Confirm water supply and drainage connection points are available nearby (plumbing may need to be run/connected — please assess on site) Connect to existing electrical provision Install new dishwasher Fit any required cabinetry infill panels or trims to match existing kitchen finish (white gloss cabinetry, stone benchtop) for a neat finished look Looking for a qualified tradesperson (kitchen installer/carpenter + plumber, or an all-in-one appliance installer) to quote and carry out this work. Location: Point Cook, VIC 3030

Sash window 2no surrounds Sash window adjustment Door hanging adjustment Other miscellaneous tasks

Cabinet making duties include unloading the vans onsite, cover screws with caps, clean doors.

Wood rot , window frame repair

Timing: To be completed by end of August Availability: Time and days to be confirmed upon communication I’m seeking an experienced cabinet maker to design, supply, and install internal shelving and storage solutions for an existing built-in wardrobe. The project involves creating a functional, well-finished internal layout, including shelving, drawers, and hanging space, tailored to the existing wardrobe dimensions. Wardrobe Measurements: Width: 2080mm Height: 2460mm Depth: 460mm (Final site measure to be confirmed by contractor) Scope of Work: Design a practical internal wardrobe layout (shelving, hanging rails, storage as required) Supply all materials, fittings, and hardware Professional installation with a clean, level finish Removal and disposal of all packaging and rubbish after installation Requirements: Proven experience with built-in wardrobes or cabinetry Ability to design solutions to suit an existing space Strong attention to detail and quality workmanship Photos or examples of previous similar work preferred This task is to obtain a quote from a cabinet maker, with the potential to proceed with the work if the quote is suitable.

I’m looking for someone to help sand 3 wooden shelves in Point Cook. The job is to sand off the existing finish to expose the natural timber, so the shelves are ready for painting or staining. No experience is required. If you’ve never done this before, that’s completely fine—I will show you exactly what to do. I will provide everything you need, including: * Sanding machine(s) * Sandpaper * All necessary tools and equipment 4 types of the profesional power tools This is a straightforward job and would suit someone who is reliable and willing to follow instructions. Please send me your quote and let me know when you’re available. Thanks!

Alter my cabinet to meet the minimum height clearance from stove to rangehood. It needs to be put up 5cm more from its current height. The new rangehood must be installed as well to make sure its well fitted and properly working. My current unit is re circulating rangehood and plug and play. Certificate must be issued as well.

Need a carpenter to repair a cavity sliding door. It’s still functional, but it’s becoming tight to operate and has some wobble when opening and closing.

Two old standard 820 x 2040 doors to be replaced with new ones. Two existing doors to have existing door handles swapped over to new ones. Ideally would like done Sunday but can be done anytime up to Tuesday.

Hello my dog bit the skirt wall board and needs to be filled/patched up and painted

Looking for someone experienced with wall mounting to install a timber entryway organiser shelf from Welds & Wood. Details: Approx. 1 metre wide timber shelf with coat hooks. To be installed on an internal plasterboard wall. Plasterboard fixings (pictured) have already been supplied by the manufacturer. Shelf has rear timber mounting rails as shown in photos. Installer to provide own tools (drill, level, stud finder if required, etc.). Must ensure shelf is level, secure and suitable for hanging coats, bags and keys. Location: West Footscray VIC Preferred: Experience mounting shelves, cabinetry, mirrors or similar wall fixtures. Please advise if additional fixings are recommended after inspection. Photos attached showing: Organiser shelf Supplied plasterboard fixings Rear mounting arrangement

need assistance for 30min to help hold joinery in place while I screw it to the kitchen wall above rangehood.

I need a small wooden stand 25mm wood, 100mm high legs 300mm length and width 200mm with a routed area in the middle that can take a display , will provide .DXF file for routinng of the display

need someone to enlarge an existing hole in a kitchen cabinet for a dishwasher hose/filter to pass through. The filter is about 10 cm wide, and the cabinet panel/opening depth is about 3.5 cm. Existing hole is smaller, so it needs to be enlarged neatly into a larger round or oval opening. Please bring the right tools, such as a hole saw, jigsaw, or oscillating multi-tool. Power cable and hoses will be removed before cutting. Need edges smoothed after cutting so they do not damage the hose.

Stain on carpet that can’t be removed, looking to replacement stained section with spare carpet we have in storage.

A freshly installed pergola needs painting. It needs 2 coats. Paint will be provided.

I need an experienced cabinet maker or carpenter to modify an existing laundry cupboard door setup. Currently there is a 2-panel folding door (231cm height x 106cm total width). I would like this converted into 4 separate doors with proper hinges and handles installed. Scope of work: • Convert folding doors into separately mounted doors • Cut doors into the following sizes: 2 doors at 105cm height 2 doors at 126cm height • Install 5 hinges on the left hand panel • Drill required holes and reposition hinges where needed • Install pull handles on the two 105cm doors (handles supplied) • Ensure doors align correctly and open smoothly Measurements: Existing door size: 231cm height x 106cm width Final configuration: 2 x 105cm doors 2 x 126cm doors Notes: • Right hand door is already mounted and only requires cutting • Left hand panel requires cutting and hinge installation • Handles supplied • Please bring your own tools Photos show the current cabinet and hinge positions. Looking for someone experienced in cabinetry to ensure a clean, professional finish. Send your quote.