Find experienced local carpenters in West Melbourne

Hi, I need someone to remove an existing grey bulkhead / half-wall in my bedroom and turn the space into a simple sitting area. What I need done: • Remove the current grey structure (see red circle in photos) • Build a simple low bench seat in its place with storage at bottom (approx. 45–50 cm high and 50 cm deep) as per photo. Style: Keep it clean and simple. Nothing fancy or heavy. I am open to other ideas as well if you have any. I have photos of the current space and examples of the look I want. Happy to discuss further details if required. Photo is AI generated so even if you can make it closer I am fine. Thanks!

Hi, I have a plywood kitchen benchtop that has burnt/charred areas.I would like to repair the burnt area instead of replacing the whole benchtop. I have attached photos. Please provide the quote including finish matching.

Need a carpenter for some framing internal walls, hang x 2 doors and some vj panel. Job in Caroline Springs

Carpenter required for small bathroom renovation Build floor and replace wall studs Install flooring and tile underlay Approx area - 1.2 x 2.4 Two days work

I’m looking for an experienced cabinet maker/handyman to supply, build and install a custom pull-out double-bin cabinet in my kitchen I have an unused space in the pantry, as shown in the attached photo, and I would like to utilise this space for an integrated bin system. What I’m after: * Custom-built white cabinet to fit the existing space * Two separate bins inside — one for general waste and one for recycling * Pull-out drawer/sliding mechanism so both bins can be easily accessed * Cabinet front/door to match the existing white pantry cabinetry as closely as possible * Strong, smooth-running runners * Neat and professional finish * Bins supplied as part of the job * Measure the space before construction to ensure a proper fit * Supply all materials and hardware * Install the completed cabinet securely

- Looking for someone to remove old VJ panelling in my bedroom and re install some new Panelling - Need the old panelling removed (Previous Air tasker did not complete the task and did a horrible job so now I need to have it removed and re installed and done properly) - The bedroom is 3.4m X 3.2M with a height of 2.3m . - Panelling will need to be cut to size and includes electrical power points, windows, cupboards etc. Wall is brick. In summary I am looking to have the below completed - remove the old panelling - Install the new panelling In terms of budget I am open and just looking for this to be done properly with precision and attention to detail. Let me know if you have any questions or need additional information

My tv cabinet is broken from behind and the screws are not tight. Need someone to fix that

Request Quote. Require a licenced Carpenter to make a bulk head approx 300mm inside the house to put gas fire sleeve into in the area shown in pictures. The box must be fireproof. Also need the skirting around the house (house is in stumps) now weatherboard has been replaced. Also require rear decking approx 2000mm x 3000mm.

We’re looking for someone to help in our Truganina workshop with making handmade timber beds. Tasks may include sanding, measuring, drilling, assembling and general workshop assistance. Woodworking or carpentry experience would be helpful, but we’re also open to someone practical, reliable and willing to learn. All tools and instructions will be provided.

Drill a hole about 4 inch diameter through a cabinet so that i can access a power socket inside the cabinet. Hole required on the top of cabinet so would need to stand on top of kitchen top to access

Build 3 or 4 tier Shelf on top of Dryer See Picture

A piece of wood attached to the gutter above the side gate has dropped and is stopping the gate opening and closing. Also a piece of wood has rotted under a wooden bar I have at the rear of the house need replacing so the bar can be propped up.

I’m looking for someone to help sand 3 wooden shelves in Point Cook. The job is to sand off the existing finish to expose the natural timber, so the shelves are ready for painting or staining. No experience is required. If you’ve never done this before, that’s completely fine—I will show you exactly what to do. I will provide everything you need, including: * Sanding machine(s) * Sandpaper * All necessary tools and equipment 4 types of the profesional power tools This is a straightforward job and would suit someone who is reliable and willing to follow instructions. Please send me your quote and let me know when you’re available. Thanks!

Alter my cabinet to meet the minimum height clearance from stove to rangehood. It needs to be put up 5cm more from its current height. The new rangehood must be installed as well to make sure its well fitted and properly working. My current unit is re circulating rangehood and plug and play. Certificate must be issued as well.

Need a carpenter to repair a cavity sliding door. It’s still functional, but it’s becoming tight to operate and has some wobble when opening and closing.

Two old standard 820 x 2040 doors to be replaced with new ones. Two existing doors to have existing door handles swapped over to new ones. Ideally would like done Sunday but can be done anytime up to Tuesday.

Hello my dog bit the skirt wall board and needs to be filled/patched up and painted

Looking for someone experienced with wall mounting to install a timber entryway organiser shelf from Welds & Wood. Details: Approx. 1 metre wide timber shelf with coat hooks. To be installed on an internal plasterboard wall. Plasterboard fixings (pictured) have already been supplied by the manufacturer. Shelf has rear timber mounting rails as shown in photos. Installer to provide own tools (drill, level, stud finder if required, etc.). Must ensure shelf is level, secure and suitable for hanging coats, bags and keys. Location: West Footscray VIC Preferred: Experience mounting shelves, cabinetry, mirrors or similar wall fixtures. Please advise if additional fixings are recommended after inspection. Photos attached showing: Organiser shelf Supplied plasterboard fixings Rear mounting arrangement

need assistance for 30min to help hold joinery in place while I screw it to the kitchen wall above rangehood.

I need a small wooden stand 25mm wood, 100mm high legs 300mm length and width 200mm with a routed area in the middle that can take a display , will provide .DXF file for routinng of the display