Find professional window and door services in East Melbourne

Remove exisiting outdoor lights and hang the new ones, I am unable to reach the fence to hang the outdoor lights

Double door of size 800*2700 mm needs hung to the frame with hinges.

Some paint bleaching on bonnet and roof to be resprayed. Drivers door had dropped and door handle has come off

Need experienced installer to install below aluminium indoor sliding door with four panels (see pictures attached) between dining and living room. Door already delivered onsite so need this done asap. Details: Sliding Door | Black | Double layer Height 2440 mm × Width 3270 mm × Thickness 114 mm Opens inward 4 panels 8 mm ultra-white glass

Mirror is broken. Need to replace the mirror.

Remove & replace hinges on a 2 piece, 2 metre high, bifold pantry door. Full overlay hinges provided.

Fix a minor damage on garage door

Aluminium pivot door needs a bearing down the bottom. - It has dropped or warm over the years and is jamming in the bottom - needs to be lifted. Assume the lower bearing needs to lift it up a few mill. See pics Please quote accordingly

They are hanging sliding doors. Middle wardrobe door is out of rail.

This is a manual tilt door. With door height 2150mm. First beam high is 2150mm as well

We have a mirror we nerd mounted today due to festivites , a door knob which has come off need it fixed pls amd have 2-3 frames to put up as well should be an hour or 2 job

Hi there, our pantry cupboard door hinges have broken we need it fixed. All 3 hinges need replacing. We'll need you to get the replacement hinges and then do the replacement work.

We need the mesh on front door replaced as there is a hole on it.

Fix a door that doesn’t open/ close smoothly. It is able to be closed and opened but it makes a noise at the latch/ strike plate.

A side piece of the door has come off because my little Son has been slamming it. It still Opens and closes. We need someone that can put it back in place

Re screw this door latch

We need a hole in a pantry door filled in and sanded over

I am after quotes for the supply and installation of garage door opener system for an aluminium roll-up garage door. Size app. 2.7 m in width and 2.6 in height

Hi, I need a handyman to properly repair a loose door lock on a metal door. The previous person used the wrong screws (too short and probably not for metal) and an incorrect method to secure the lock mechanism. The entire lock is now coming loose from the door frame. The Job: · Remove the current, incorrectly installed screws. · Assess the existing screw holes (they are likely stripped out). · Properly repair the holes (e.g., filling with epoxy, using a thread insert, or drilling new pilot holes). · Securely re-attach the lock mechanism using the correct, longer screws suitable for a metal door. · Ensure the lock is aligned and functions smoothly. Please let me know what method and materials you would use to make a permanent fix. I'm looking for a proper solution, not just a quick temporary patch. Location: Doncaster East

One flush mount panel door W4000xH2400; one roller door W1600xH2400