Find experienced local roofers in Willow Vale QLD

Barge Capping on Horse Arena roof loose. Needs securing by re riveting. Need a long extension ladder to get onto the roof. Minimum 4 meters to roof.

Got a pesky drain that needs a clean out but it’s 5.2 high so need a ladder at 5.5 m to reach it - approx 5 metres long - will take you 15 minutes

Just need a gutter and facia board to be replaced. Both are 2.5m long.

Install of new metal Gutters, total of 70 metres and 10 outlets, 12 stop ends. All materials on site ready to go, Level 1 fascia to be fixed to can be reached from lower roof, approx 1.500mm height. Lower roof accessible from concrete except one area approx 4 metres long (Aluminium scaffold tower and planks are in place)

Install Top ridge and barge flashings to one storey metal roof, top ridge to be cut in to suit corrugated roof profile.

Two pipes need old sealant removed and resealed on my roof . Also reseal a crack in the join

I need a Bali hut re-thatched. I can supply the thatching and help out (be the labourer). The hut needs roughly 100 strips replacing. Each strip is 2.5 metres long plus 20 ‘bugs’ (corner pieces) - Due date: Flexible

Fitting a brand new flat roof rack to a Mitsubishi 4x4 must know what there doing. It on a Mitsubishi Triton mq 2018. Only people with experience thank you - Due date: Flexible

9m carport, already guttered, to have pipe connected from top gutter, back to nearby water tank

55 sqm flatlet - want to insulate roof space. Looking for experienced installer with references and examples.

We need some maintenance work done on our roof as part of an insurance claim. The repairs need to be done by a qualified roof repairer so we can show evidence of repair to our home insurer. A full report can be provided regarding the issues ... please find below the description of repairs. Our house is a 2 story house. - replacement of the Dek-tite flashing to the roof elevation over the commercial kitchen storage area 1x 50mm -We recommend the ridge and hip cap junctions are resealed to prevent water entry into the home.

Have 2 insulated roofs I require to be laid, screwed off, flashing and guttering 1 is 3.2m x 10m long, receiver channel 1 side and beam on the other, 50mm insulated panels. All structural work posts, beams etc will be complete prior to starting. Happy to provide some labour to assist getting the sheets in place. Other is a 8m x 6m pool house just planning at the moment. Cheers