Find a professional privacy screen installer in VIC

We would like to build a full-height timber privacy screen, in the style shown in the attached image, to provide privacy for our entrance. The screen should extend from the ceiling all the way down to the deck, with approximate dimensions of 228 cm in height and 187 cm in width. We would appreciate a quote based on these measurements and style.

SUBJECT | Reuse and repaint existing laser-cut panels; frosted film and retractable access screen I am refreshing an apartment veranda and would like to reuse as much of the existing decorative screening as possible. The objective is a cleaner, more spacious appearance with coordinated finishes, while preserving privacy and practical access. The existing bronze-coloured laser-cut panels are to be removed, inspected, prepared, repainted in an agreed timber-look or complementary finish where practical, and refixed in a revised arrangement. The existing vertical garden is to be removed. I would like a matching full-height decorative screen in that location, preferably using existing panels if their dimensions and condition permit. I also need privacy treatment on the lower glass sections and an operable screen at the far end of the veranda. This end screen must retract, slide, fold or open to allow regular access outside for weeding and maintenance; a permanently fixed panel is unsuitable. • Survey existing laser-cut panels and supports; identify which panels can be safely reused and how best to refix them without damaging the balustrade. • Allow for removal of existing panels and vertical garden, surface preparation, suitable exterior refinishing/repainting, and installation of reused panels; price any new matching panels separately. • Source and install suitable frosted privacy film to the lower glass sections, subject to glass type, film compatibility, exposure and warranty. • Propose and price a wind-appropriate retractable, sliding, folding or hinged privacy screen for the rear access point, with secure open and closed positions.

Looking for someone to supply and install temporary privacy screening along the rear timber fence of my property in Mooroolbark. The neighbouring property is currently under construction, and I’d like some additional privacy while builders are working on the roof. Task includes: * Supplying and installing suitable privacy mesh or shade cloth. * Extending screening above the existing fence where practical. * Ensuring the screening is secure, wind-resistant and won’t damage the existing fence. * Keeping the installation neat and easy to remove once construction is completed. I’m looking for a simple, affordable temporary solution rather than permanent fencing. Please see attached photos of the fence and neighbouring construction. Open to suggestions on the most practical and cost-effective installation method. Please include materials and labour in your offer.

Seeking someone to help set up two kids’ bedrooms. #1 Hang paste the wall wallpaper to 4 BIR doors The wallpaper is Natty & Polly paste the wall, and the two BIRs each have one door that is a mirror and one door that is some kind of plastic veneer over particleboard. It's 4 doors total, each door roughly 80cm x 230cm. The doors slide fully past each other which should help! You will please need to BYO paste and tools; we only have the wallpaper. #2 Apply static privacy film to 4 window panes Each window pane is approx 85cm wide x 75cm tall. They are all at floor level. We only want the privacy screen on the bottom two window panes. We have all the materials needed.

Assembly of a metal planter / privacy screen. 118cm x 186cm x 30.5 cm.

I have a Coolaroo Fairhaven Gazebo. My installer did not properly put in the privacy screen, as it was not going up and down properly (not rolling all the way down to the bottom). And now I cannot reach them anymore and I need to fix this. May be related to two issues: the privacy screen not installed correctly, and/or the front posts are not completely vertically aligned. I am looking for someone to either install properly the privacy screen on the front (ideally), or move it to the back side, where the posts are vertically aligned correctly. Note: The screws thread that hold the screen attached to the top may be worn and you need to remove the screws and replace with other screws. The photos show the privacy screen, and the side channels (currently unmounted on the deck). These need to be mounted to the side of the posts, so the screen slides through the channel. Also the side board on the deck (the one close to the fence) has not been 100% properly screwed in, and needs to be attached properly. (the space to put in screws is tight given the fence on the right, but fence can be removed if that is the easiest).

Looking for someone to make our existing front gate more private (see photo). We’d like black privacy panels/screening added to the back of the existing gate so you can’t see through it from the street. Happy for you to recommend the best material/solution — ideally something neat, durable and lightweight that works with the existing gate. Would need you to measure, supply/cut and install the panels while keeping the gate and lock working properly. Located South Melbourne. Please quote for labour + materials (or let me know material costs separately).

Looking for an experienced fencing installer to supply and install a solid charcoal privacy screen above my existing brick boundary wall. Photos attached. Please measure the wall, advise on safe post support, and include all materials, footings and labour in your offer. I’m open to an affordable in-stock option. Must be completed before 6 October. Please state your earliest availability and total price.

3 separate black screening panels * Each panel: 1.8 m wide * Height: 400–600 mm * Installed above the existing Colorbond fence * Total screening length: 5.4 linear metres Photo of area below

Brand new fence requires an extension for privacy

Need privacy screening built around pool equipment to hide with some sort of door access (swinging, sliding or removable) for maintenance when req. Fencing will be off the wall. So side panels and front needed built or bought only. Doesn't have to be anything fancy, just want it visually unseen. 1700m Height 3800m Wide 850mm - 900mm Depth Something similar to the photos attached. Will remove pool vaccumn in picture.

Remove aluminium privacy screens from 6 windows on first floor of townhouse.

Bunnings bamboo privacy screen to go along neighbours fence it is. Rental property so no permanent fixtures

We have a fence and gate that needs 30% perforated powder coated black sheet riveted to it for more privacy. Will pay for or supply the screening

We just moved into a new office and need someone to come in an cleanly apply some frosting to our office windows (bottom two sections of two windows) - will pay for the film on top of the amount

I need privacy installation on a Approximately 210cm length and 235cm breadth window which is faced to the road

Please help me to remove the screen-film and replace it with a new one.

Build front deck and privacy screen

I need to install privacy aluminium slats/ battens in balcony on a new house

This job involves attaching 5 privacy screens on the decking near the boundary fence. The decking has a balustrade however a frame will need to be attached to it first to keep the screens securerly in place. The screens are on site and are Matrix 1800 x 900mm Charcoal Bird Of Paradise Screen Panels. https://www.bunnings.com.au/matrix-1800-x-900mm-charcoal-bird-of-paradise-screen-panel_p0627805