Find a professional gate installation in Clayton South

My back fence has shifted and now it’s not lining up with the gate, the gate won’t close. This job may involve re-stumping of a post into concrete, or adding steel brackets.

Timber fence along a driveway, 14m length, 1.95m high, two gates 1.6 to 2 m each

Install a new gate latch.

Repair of metal gates and framework between car Portland back hard. One gates metal frame would need to be straightened or rebuilt.

Need to install 6 meter of timber fence and construct a simple gate

We need a gate hinge to be fixed (most likely the screws need to be tighten) Flexiable with date and time.

Would like to build a gate with back of my shop. Below is the details Width is 2.4m Height is 2.1m Prefer black colour gates. Please find the attachment photo for your reference. Requirements - proper frame with good finish with no gasps - should be able to lock properly from both sides

Need to construct and install a timber side gate to the yard, to match the existing timber paling fence. 1.3meters wide. 1.8 meters high. To match the existing fence height and pattern. Need the most affordable but practical method to construct the door. Pls quote.

Need colorbond fencing done 2.1 h to connect to both boundaries Colour Basalt Need 4-5m electric sliding gate or telescopic gate , Ped Gate 1-1.5m wide, privacy slate or angled steel minimum spacing , strong posts total dimension 16.1m front and 1 color bond connect 4.8m

Need to move the gate shown in the picture a few metres back. The gate is already dismantled. The posts, gates are all intact. Need to bolt three posts to concrete and one to the brick wall. Needs concrete slab for the right posts

Side gate was removed as carport was being installed. need to fix the side gate again. Gate is available, just need someone to fix it

I am looking for someone to supply and install a gate on my driveway. Preferably to match the color and design of the fence

The gate door locked is broken - Due date: Flexible

Colourbond gate on rollers. - Due date: Flexible

Small house paint lounge, dining room and hall way.reattach side gate and shed door if possiableplus some cost effective ideas for my kitchen - Due date: Flexible

Welding a fence Gate , about 3-4hours job require . - Due date: Flexible

I would like to get electric sliding gate installed. Width 3200mm * 1400mm high. - Due date: Needs to be done on Saturday, 7 May 2022

The gate currently can slide back and forth, however due to the wheels not functionally correctly it is hard to push and pull the gate. The wheels appear to be locked/jammed in place. The wheels are welded onto the gate and will need to be cut out and replaced with new wheels and welded back on. - Due date: Before Friday, 31st Dec 2021

Wanting to retain existing front fence and replace gate with a motorised sliding gate - Due date: Flexible

removal of old grass and lay Artificial Turf, Decking Timber Merbau 3m x 3.5m, replace pergola roof skylight, side of house gate timber Merbau. - Due date: Flexible