Find a professional gate installation in Chadstone

Need a licensed plumber helping to check the reason of leaking ! Today. Chadstone

Put up baby gate at stairs

Currently have less height front wall and gates, need fencing on top of the front wall to increase height for better safety and privacy. The side wooden fencings (4-5m) in length also need to be raised. Looking for overall fence height of 6 - 6.5 feet. Also need automatic gate to be installed. Total front wall is 16m in length. Need both material (fence & automatic door) and installation.

I have a BFT 400 motorised sliding gate, but the track isn’t aligned properly after being used for a few years. Therefore, the motor can’t properly slide the gate…. Would need to realign the track.

the driveway gate has a few aluminum bars on the frame. 7 bars were damaged/detached from the frame after a van hit it. - Due date: Flexible

Pedestrian Gate has had the last picket snapped off and now the gate is sagging. Picket needs to be replaced. - Due date: Before Friday, 26 January 2024

1.2 meter high Black Horizontal Aluminium Slat 16.2 meters in total in three sections (ie 10m, 4m and 2.2m) with 1 x 1 meter matching gate. Need installation also - Due date: Flexible

I jave an electric automatic gate and it has a remote/fob. I need 2 more remotes created. Also would like to understand if a garage electric door an be fixed - Due date: Needs to be done on Saturday, 17 June 2023

Front wooden fence and side gate need to be stained - Due date: Before Thursday, 6 April 2023

Gate has come off from the supporting hinges - Due date: Flexible

Hi David, not sure if you've received my replies (it looks like I've just been replying to my previous messages. I don't use Airtasker that much so I'm not too sure). Happy to go ahead as agreed for the price for the wooden gate to be installed. I've discussed with the builders and they've confirmed there are no utilities that run along the fence line where the gate would be installed. Let me know when you're free, and we can set up a time Thanks again!

Build/supply simple gate (eg. Z frame) with a padbolt lock and install gate as described. Measurements and installation would need to be inspected, so quote would be accurate. There's a Bunnings 5-minutes drive away for materials and we will reimburse cost of materials. Dimensions are roughly 180cm x 85cm. There is an existing timber frame, which can be removed or re-used. The purpose of the gate is to keep out autumn leaves/children/animals and provide some security for stored items. - Due date: Before Monday, 19 December 2022

Hello, We required Gate. Double doors. 2m Wide and 1.5m in height. Modern looking. Full blackout. Share your photos. Would like to proceed soon as possible with right price - Due date: Flexible

I need someone to weld my gate, just a couple of tack welds should do it. - Due date: Flexible

We need to install safety gates at the top and bottom of our staircase. It is not possible to install gates bought from the shop as there’s a curvature in our staircase which requires specific measurements. Would really appreciate an initial consult and then proceed to setup.

I require a 2.0m Wide X 1.80m High Timber Batten Steel Framed Fence installed on the side of new house. One side can be mounted to bricks the other to new paling fence. Timber can be treated pine. The gate opening approx 900-1000mm with some form of lock / latch. Spacing of battens to be 10mm for privacy. Example photos attached as a guide. Very flexible for timing.

Fence was recently replaced and half of the gate is taken down. I need the gate to be reattached onto the fence. Please quote. - Due date: Flexible

This is a 2BR unit in Chadstone. I'm after a side get supply & installation quotes for Timber and metal types. - Due date: Before Monday, 17th Jan 2022

I need a garden gate. Height has to be less than 1 meter 2 meter total area 2 post will be required

Supply and install 1.8 meter Gate to the front garden