Find professional garden shed repair in VIC

Complete partially assembled 3m × 3m Absco garden shed Absco 3.0 × 3.0 × 2.06m double-door garden shed purchased from Bunnings. - https://www.bunnings.com.au/absco-sheds-3-0-x-3-0-x-2-06m-zincalume-premier-double-door-garden-shed_p3310025 The individual wall/side/roof panels have already been assembled. Looking for someone experienced with Absco/garden sheds to complete the installation: • Erect and join the four assembled wall sections • Install/assemble the roof • Square and align the shed/doors correctly • Check the already assembled sections and make any minor adjustments required (e.g. tighten/refit screws or fix any small bits and pieces that may not be fitted correctly) • Drill into the existing concrete slab and install the supplied anchor bolts • Complete the shed ready for use Shed is already at the installation location. Please bring the tools required, including suitable drill/concrete masonry bits and ladder. Looking for someone who has assembled Absco sheds before. Budget: $180 – open to reasonable offers.

We need a concrete paver foundation for a small, 1.5 metre by 3 metre, garden shed to be erected on.

Got a small garden shed for removal and disposal. Freestanding, just needs to be loaded up. Easy rear lane access to the spot. H 1.5m D 1.8m W 0.75m

Pick Up & Install Handi-Pod HP2 Garden Shed – Epping to Aintree Task: Pick up, transport and fully install a new Handi-Pod Garden Shed (HP2). Looking for an experienced and reliable handyman or shed installer to collect a new Handi-Pod Garden Shed HP2 from Stratco store in Epping and deliver and install it at a property in Aintree, Victoria. 1. Pickup Details Pickup location: Stratco, Epping VIC Date: Saturday 31 October 2026 Pickup time: 9-11am Transport: Collect the shed from Stratco and transport it to Aintree VIC. 2. Package Dimensions & Weight Please note the shed comes in the following package: Width: 1,000mm Height: 215mm Length: 2,260mm Total weight: 93kg You will need a suitable vehicle or trailer and equipment to safely load, transport and unload the package. 3. Installation Details Location: Aintree VIC Installation date: Saturday 31 October 2026 (same day as pickup). Installation surface: Existing exposed concrete base. Assemble the shed in accordance with the manufacturer's assembly instructions. The shed must be securely bolted to the existing concrete base in accordance with the manufacturer's installation instructions. Ensure the shed is level, properly aligned and fully assembled. Remove all packaging and leave the work area tidy. 4. What You'll Need Suitable vehicle or trailer to collect and transport the shed. All necessary tools, equipment and fixings required for assembly and installation. Previous experience assembling and installing garden sheds. 5. When Making an Offer Please confirm: Your experience with garden shed assembly and installation. Availability for Saturday 31 October 2026. That you can collect from Stratco Epping in the morning. That your quote includes pickup, transport, unloading, complete assembly and bolting the shed to the concrete base. Please provide an all-inclusive price for the complete job. Looking for someone reliable, experienced and capable of completing the job professionally and safely in one visit

brand new garden shed needs installed size is 6x3

I need a garden shed assembled

Easyshed colorbond new 3.0 x 0.78 cm x 1.95 high Garden shed

Side , rear and roof panels are assembled front partially assembly need built and dynabolted in

Need concrete mixed and poured for a garden shed base. Approx 10 m2 area with 100mm depth

Need someone to build a garden shed and anchor to the concrete ground. https://www.gardenshedsgalore.com.au/product/flat-roof-sheds-2250-x-780-x-1820-h/

I’m looking for an experienced handyman or shed installer to assemble and install a brand-new EasyShed Flat Roof Garden Shed (Model EF-S1508) at my property in Malvern East. Shed details: * Model: EasyShed EF-S1508 * Dimensions: 1.51m (W) × 0.78m (D) × 1.82m (H) * Brand new, supplied flat-packed with assembly instructions * Concrete fixing kit already purchased Scope of work: 1. Fully assemble the shed according to the manufacturer’s instructions. 2. Position it on the existing concrete surface (location marked in the attached photo). 3. The concrete surface has a slight slope, approximately 25mm height difference across the 1.5m width. Please allow for suitable levelling using durable, non-compressible packers/shims if appropriate. 4. Securely anchor the shed to the existing concrete using suitable fixings. 5. Ensure the shed is level, stable, the door operates correctly, and the installation is weather-resistant. Important notes: * No new concrete slab or cement work required. * The existing concrete drainage slope should be maintained. * Please bring your own tools and any suitable levelling materials. * I can provide the shed assembly manual and photos beforehand. Please include all labour and any additional levelling materials in your offer.

Looking for someone experienced with garden shed installation to assemble and install a new EasyShed 3m × 2.25m Gable Roof Garden Shed. The shed has been purchased and will be supplied flat-packed with the manufacturer’s assembly instructions and components. Shed details: * EasyShed Gable Roof Garden Shed * Size: 3.0m wide × 2.25m deep * Standard height: approximately 2.05m * Steel construction * To be installed and securely anchored to the concrete base Fixings already purchased: * EasyShed Concrete Fixings – 8 pack * Quantity: 2 packs (16 fixings total) The task includes: * Unpack and check shed components * Fully assemble wall, door and roof panels * Square and correctly align the shed * Assemble and adjust doors so they open and close properly * Install roof, ridge, flashings and associated components * Position the completed shed correctly on the concrete base * Drill and securely anchor the shed to the concrete using the supplied EasyShed concrete fixing kits * Leave the shed properly aligned, secure and complete in accordance with the manufacturer’s instructions * Remove installation packaging/offcuts and leave the area tidy Please bring all tools required for assembly and drilling/fixing into concrete. Prefer someone who has previous experience assembling EasyShed or similar metal garden sheds. Product: EasyShed – 3m × 2.25m Gable Roof Garden Shed.

We have a cement slab. We have an unassembled garden shed. We need the shed assembled and secured to the slab.

Dismantle small garden shed. Removal not required

Install 2.8 by 2.8 garden shed over the concrete. Concrete base is already there . Shed is getting delivered next week .

Assemble a new garden shed. Needs a rivet gun to screw in the holes. Owner will be home to assist. Garden shed is aluminium material.

Build and install Stratco flatpack garden shed and beam floor kit on plastic pave base, ground a bit on slope, and not level. But I just need the shed build and placed there. See photo 2.21m Wide x 0.85m Deep x 1.90m high Must have own tools. Instruction booklet available

Have started building garden shed but cant get it done just need help to finish it off ideally a couple of tall people

Looking for someone to dismantle and remove a small garden shed and timber structure from courtyard. Garden shed: - Approx. 2m wide x 1m deep x 2m high - Mainly timber with a corrugated plastic roof - Entire shed to be dismantled and removed Timber platform/base: - Remove the small raised timber platform/base currently surrounding the palm tree (see photo) The job includes dismantling, removal and disposal of all materials. There is side gate access to courtyard, with street parking available directly outside gate. Please bring all tools/equipment required and include removal and disposal costs in your offer.

Install garden shed in photos- on concrete slab. Just put it together- easy access.