Find an experienced flooring expert in Brisbane

Need installation of vinyl sheeting in 3x6m clinic room at Herston Private Hospital. I have the vinyl roles just need someone to remove the current carpet tiles and glue down and install the vinyl sheeting. Work needs to be upto clinical standards and so will require some one with all the specialised heating tools etc. Needing ASAP

Gym flooring to be installed Removal of old flooring 36m2

Need 27sq m of vinyl floor installed in a kitchen . Vinyl already on site .

I am purchasing this timber-look vinyl flooring from Bunnings - https://www.bunnings.com.au/senso-2m-beige-wood-diy-practica-sheet-vinyl_p0333143 I estimate we will need about 45 square metres installed across two rooms, a hallway and a staircase. The installer will need to remove the existing vinyl floor and replace/reinstall the skirting.

New kitchen to be installed on following day, need to have floating floors removed so kitchen can be installed

I have a pool deck that needs fixing and also extend around the sides. It can be built and extended on side by way of using the support of the existing pool fence posts to support the deck on the sides. The section that is opened I still have the deck Timbers that can be re used as it was the frame that is damaged I would also like some French doors replaced with a sliding door

In my garage, it has concrete flooring, and I'm looking to lay down a layer of vinyl flooring, which I will purchase from Bunnings. The area is 27 m², and I need someone to come in and assist laying down this vinyl flooring on top of the concrete in the garage (extra would include helping to assemble a bed frame and desk which is still packed away)

Description: Temporary 7-day retail activation needs black anti-slip vinyl flooring installed. Scope: Black vinyl, anti-slip finish, 17m x 7.5m (~127.5m²) Ground is uneven 0- subflooring/levelling required before vinyl install Full removal and disposal after event Site visit welcome before quoting Need: Itemised quote (subfloor + vinyl + labour + removal), lead time, and earliest install availability. Ideal candidate: Commercial/events flooring contractor experienced with temporary installs on uneven ground. BUDGET: $12000

we need two planks from our engineered timber flooring replaced. We have pet damage and the wood has darkened. Small and simple job. Timber provided just need to pull up and relay . Please see attached photos

Remove sliding wood panel and replace it by wood slats. Remove smaller wood slats at the window level and replace by using same wood slats as on the rest of the wall. Will pay for the wood slats myself.

Approx 70m sq of hybrid flooring to be installed in an apartment. Concrete floor is flat and doesn’t need any levelling (has laminate down now but removing). Skirting will be removed. One or two trims required but nothing major. Happy to let you take a look and decide final price.

Professional required for lino removal and installation. Job includes removing existing lino, preparing the surface, and installing new lino to a high standard. Must have proven experience, own tools, and be reliable. Work needs to be completed this week. Please get in touch with your availability and quote.

Looking for pricing on installing composite decking around our pool area replacing the tiles. We would also be wanting a glass pool fence installed. The length is approx 10m & at its maximum the tiles are 2.2m from fence.

I recently got my flooring done but I left a spot unchanged and now would like it changed. My flooring in my wardrobe. I need the carpet ripped up and Riverhills floors 6.5mm to be installed. It’s a small 1 meter by 0.5 meter area.

Quick step floorboard installation (tongue and groove) and skirting board installation for a 2.5 x2.5m room.

Hi need labour to help with Lay vinyl flooring just for living room in one day. I will provide material. Need experience person do the proper job.

20 sqm needs install of hybrid flooring of which 1.5sqm of tiles needs to be removed and leveled - I just need someone who can do the leveling (use their own equipment) and then install I will purchase the materials

Removal , prep and install hybrid flooring , 20m squared

New hybrid flooring is being installed, we need supply & installation of white scotia for approx 30meters .

Cut and lay loose vinyl tile squares. No glue down required. Just cutting with Stanley knife. 10sqm

Need wooden repolished 90m2

Small dining room, hallway and kitchen needing the floorboards sanded and polished. Probably around 30sqm or just over

4 bedroom house in Auchenflower, require timber floor repolish

I need to get my Queenslander balcony sand & oiled

match existing pine flooring. kitchen cabinets removed, couple of pipe holes also require filling. thx.

We need our desk sanded and polished. It’s approx 25 sqm

Minor scruff marks on the timber floor wax, i'd like to have this covered and repaired.

Commercial space needing cement floor levelled and polished- roughly 100sqm

Looking for a quote to remove old carpet which is laid over chipboard secured to old timber floor. We will then need the timber floor sanded & polished. There may be a couple of broken planks to be replaced or patching required. The area is roughly 55sqm (3 bedrooms, hallway, lounge room).

Approx 112m2 mix of hardwood and hoop pipe timber floor. Job required: - Floor leveling - Gaps filling - Sanding and Polishing - Waterbase poly Budget is $3000

Polish /buff small pet scratches on timber stairs and some other spot throughout house Please reply if you have any tricks or suggestions to get rid of these small scratches a total too bad until you look up close. They’re hard to see in the photos.

Sand and polish timber kitchen and laundry floorboards. The kitchen is 5.0m x 3.65m and the laundry is 3.5m x 1.75m. Both rooms are completely empty. The kitchen floorboards are wider hardwood and the laundry floorboards are narrower.

Old wooden floor needs to be sanded back and polished.

I did a scratch on the floor , just need someone to do it .

Removing the carpet, sanding and polishing the timber floor.

Sand, tint and polish pine floorboards for approx 100sqm

Need someone to fix one floorboard that is loose and sand/polish all of them. Area is kitchen, dining and living area. Photos os floor plan attached. Unit is unfinished and the job can be done from 15th March to 18th March.

there is patch on the floor in which the polish is peeling off and I would like it to be sanded and polished

Clean off these rubber marks and scratches from floor and polish. I am not sure what the method would be but please let me know what you suggest! Space is approx. 10 x 20m however not all of the floor is damaged. I can provide a video or you are welcome to inspect. Thank you

Sand and polish timber floors in three bedrooms (30m2). Nails and staples already removed and edges sanded w. edge sander. Ran out of time for drum sander and polish. Should be quick and easy for someone who knows what they’re doing.

65sqm solid hardwood floor to be full sand and refinish. located in Brisbane CBD.

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

Kitchen is being renovated and section of floor needs to be removed and replaced to suit new design. We have the material ready to go - Due date: Before Thursday, 29 February 2024