Find experienced local carpenters in South East Melbourne

Need to replace the wardrobe doors with sliding doors. Add drawers inside and at the top shelf include another shelf. There are 2 rooms wardrobe as per the photos attached. Room 1: 3m width x 2.5m height Room 2: 2.2m width x 2.5m height The drawers inside to be 3 and 4 drawers with height to be 70cm. There will be 6 of the drawer sets.

Small Kitchen. level cabinets Install side and end panels. Pin to walls. Install benchtop and cut out for sink. Install kickboards. All cabinets already assembled and doors installed.

Looking for a cabinet maker to extend this panel as previously been done from builder’s cabinet maker

Looking for quotes to sand and stain deck - approx 7 x 3 meters. Items on deck will be moved prior to arrival

Check in 45mm x 240mm in existing studs then fit 240mm beam. Then jackstud either end. All materials supplied

Hi, we need our front door sand down and retain please

Renovating kitchen and need cabinet maker to supply and install a wallnut styled cabinet as per the enclosed photo. First 2 photos are taken of my current kitchen, 3rd photo is what i am seeking after renovation

I need to add extra cabinets to my laundry. With same existing colours. Please provide an estimate. I have coloured it in green for extra cabinets need.

It’s the facing of kitchen cabinets covering the gap between ceiling and top of the cabinets and also need a quote for changing couple of wardrobe’s door to sliding doors and fixing few wardrobes

One of our external doors in the shed have rotten and need replacement. Looking for a reliable handyman to supply and install the door. I can provide the handle/lock to be fitted in the door. Please see the photos for dimensions.

Want to make cabinet in my WIR.

Looking for creative carpenter who can build new TV unit, in some classic designs. photos attached. Hight of celling 2740mm (9"), Width 5370mm This task is to share few designs and quotations. Please share previous work done with photos. Note - This is new house, I also want to do few more stuff such narrowing doorway for privacy etc..but it will be seperate.

I need 6 internal doors and 1 linen closet door replaced with stanford style doors. The existing door jambs are in place and in good condition. The job includes: • Removing and disposing of 6 existing internal doors and 1 linen closet door • Supply and Installing 6 new standard internal doors • Supply and Fitting new hinges, handles with privacy pin locks, strike plates and all required hardware • Ensuring all doors open, close, and latch smoothly • Cleaning up work area after installation • Doors should be properly aligned and neatly fitted into existing frames • Old doors and any leftover material must be taken offsite and responsibly disposed of Existing door dimensions Master Bed Door - 810 X 2020 Ensuit Door - 720 X 2040 Bed room 2 - 810 X 2020 Bed room 3 - 810 X 2020 Bed room 4 - 820 X 2040 Bathroom door - 760 X 2020 linen closet door - 680 X 2020

Replace stained toilet seat Will pay cost of deat separately

There is a small water leak from the roof which has resulted in the water staining the plasterboard. Only issue is the leak is directly under the solar panels so ideally i need someone to go in the roof and seal it from the inside.

Pantry door, approx 2.5m high, with 5x hinges. 4x have screw fixings that have sheared off and threads are stuck in the door.

Need help handing an ikea wall mounted cabinet. Have tried and failed. Ive also run out of wall plugs to screw the bracket into the wall so someone who has a few of these already would be great.

Need merbau deck, stairs and wall sanded , cleaned and stained

Need to sand and restraining 4.4 x 7.5 deck and 2 coats

Build a 3 piece sun Lounge outdoor day bed. With frame and canopy. Can be built inside under aircon then carried out the back. (If the day is hot) Features Modular design offers versatile setups 0-90 Folding canopy UV-resistant frame with water-resistant cushion Heavy duty galvanised steel frame Comes with 7cm thick high density foam seat cushion Removable and washable cushion cover Specifications: Frame material: Galvanised steel Canopy material:Polyester Frame Canopy Seat cushion thickness: 7cm Lounge max. weight capacity: 120kg/unit Overall dimensions: 161cm x 180cm x 145cm Assembly required: Yes No. of package: 3 Package Content Gardeon Outdoor Day Bed x1 Assembly Manual x1