Find an experienced gas fitter in VIC

I have an existing gas heater that needs to be decommissioned, including capping and making safe services connection. Disposal of the redundant unit is my responsibility. Need a licensed gas plumber to do disconnection of existing gas heater unit.

We are looking for a licensed plumber to swap over a Nat Gas SpaHheater. It’s the same unit, straight swap for what’s there… We are in Greensborough Thanks Chris

We are replacing some plaster in our ceiling and we realised one of our pipes (see picture) leaked a few drops of water in the past two weeks. We are wanting you to remove the screw cap junction or replace rubber gasket on junction cap or replace with U bend- whatever is most appropriate

Hi, I have a 4-burner gas cooktop that needs repair. One of the burners has a faulty igniter — it won't spark on its own unless I simultaneously hold down the ignition button of another burner at the same time. I'm looking for someone experienced with cooktop or gas appliance repairs to diagnose and fix the ignition issue on this burner.

Looking to relocate the gas stove in the kitchen, gas line is in the roof. There is another line that runs outside I would like capped too.

My gas cooktop ignition on one of the burners is firing when turned on continuously

Our wall gas oven won’t stay lit. We need someone to come out and have a look and service it, and hopefully get it going again. All other gas appliances on the property are working fine.

Looking for a licensed plumber / gas fitter to attend my home and assess issues with: • Water pump may need repair or replacement • Gas is supplied but requires inspection and possible part replacement or adjustment

Hi everyone, I am looking for a licensed plumber or gas fitter to permanently disconnect and cap the gas line to my broken cooktop so I can safely have an electric induction unit installed later. My current setup is a standard 60cm gas cooktop sitting directly above a Westinghouse electric wall oven. The gas is currently turned off at the main valve and the benchtop is laminate. I need you to safely disconnect the broken gas cooktop and permanently cap the gas pipe behind the oven. You will also need to test the line to ensure there are absolutely no leaks and issue a VBA Gas Compliance Certificate, which is mandatory for me to proceed with the electrical stage. Please leave the decommissioned cooktop sitting in the benchtop cutout once disconnected. My electrician will remove and dispose of it later to ensure dust and debris do not fall into the exposed oven casing in the meantime. You do not need to do any physical removal or electrical work. Regarding availability, I work from home most days, so my schedule is highly flexible for you to drop by during the week. Cheers, Sean

Looking for a licensed gas fitter to disconnect a gas cooktop and install a 1/2 inch gas cock to safely isolate the gas supply. Please provide a quote and availability, cheers!

Disconnect gas fire that is no longer in use

Remove Gas Heater and Cap the Gas line. Gas heater is in working condition. Happy for you to take it if you want as I no longer need it.

Disconnect gas in the back kitchen and cap it off. If you can dismantle the kitchen and take the rubbish away please quote and mention the in the quote.

Replace my gas burner . Cut the laminate board bench to the new size and replace the burner

There is a copper gas pipe sticking out of the ground already, it just needs to be fitted off with a shut off valve and hose to connect my BBQ to it

Need someone to supply and fit a gas door closer to a front glass door of a retail shop. Current one is not functioning and door is slamming into the frame and damaging the hinges.

I have an old outdoor spa and a fixed gas heater that need to be fully disconnected prior to demolition. Scope of work: • Isolate, disconnect, and cap the gas supply to the outdoor spa/heater • Disconnect and cap hot and cold water supply lines • Ensure all services are left safe, compliant, and certified Requirements: • Must be a licensed plumber with gasfitting endorsement (Victoria) • Must be able to issue the required Gas Compliance Certificate (and plumbing compliance if applicable) • No demolition or removal required – plumbing work only Access is easy and the area is clear. Please include your licence details in your response.

I need a compliance check for gas + fixes needed if required. Quote is for compliance check and fixes will be separately managed as needed

The gas cooktop does not ignite at times. When ignited and lit, once the knob is lifted, the flame turns off

I require a licensed gas fitter/plumber: * Service cooktop - front 2 burners have slight flame lift * Gas Fitting Line Test - slight pressure drop - within permissible limit as per ESV guidelines (Recommendation - to investigate permissible leak further) **A certificate of compliance is required when work is completed**