Hire trusted experts for dishwasher repairs in Sydney

E4 error Delonghi Machine - probably new sump seal needed

F11 error on meile dishwasher. Have done all the usual cleaning our filters etc. would be great if someone could come today ?

We are renovating a residential kitchen and need a licensed electrician to complete the electrical setup for the following appliances: Appliances to be installed: • Built-in electric oven • Range hood • Dishwasher ⸻ Scope of work Electrician to: 1. Supply and install required power points & isolators for: • Oven • Range hood • Dishwasher 2. Run and connect cabling from switchboard (if required) 3. Install safety isolator switches as required by Australian Standards 4. Test and commission all connections 5. Provide Certificate of Compliance (CoC) 6. Coordinate with cabinet installer if needed for final fit-off

My son fell on the dishwasher door and it's no longer closing at all. Need it to be fixed ASAP please

I need an experienced installer to swap over a fully integrated dishwasher in an apartment. The Job: • Disconnect & Remove: Old Smeg fully integrated dishwasher • Cabinet Panel Swap (CRUCIAL STEP): Remove the matching wooden cabinet door from the old machine and install it onto the new Bosch Series 6 • Install: New Bosch machine (connect power/water/drain) • Disposal: Must take the old dishwasher away with you Site & Access Details: • Location: Rothschild Avenue, Rosebery, NSW 2018 • Parking: Street parking typically available directly outside during the day • Apartment is on Level 5 (Lift access available) • Machine is already inside the apartment Requirements: • Must have own tools to drill/mount the cabinet panel • Must have a trolley/dolly to remove the old machine via the lift

The “check water” light is on. A reset from PowerPoint worked temporarily but came back on.

Smeg Dishwasher (DWAU214X) needing repair. Have cleaned filters and did pre wash but not working from there.

1. Remove existing dishwasher 2. Install new dishwasher into existing position with existing connection points (not integrated panel). 3. Help move old dishwasher down a stair case (1 floor).

Drawer dishwasher was installed without mounting brackets. I need to get the mounting brackets installed to prevent the dishwasher from moving when it’s in washing mode

Uninstall and remove existing integrated dishwasher drawer and install new integrated dishwasher drawer (I already own the dishwasher, it just needs to be installed)

I’m disconnecting a dishwasher so I can replace with new dishwasher. I’ve tried to do it myself but inlet hose is stuck so I need help with that. Drain hose has already been removed and power unplugged.

Disconnect old dishwasher and move outside house for council pickup. Install new dishwasher Both are freestanding.

Hi we need our old dishwasher taken out (Fisher&Paykel dish drawer Model DD60DCX7 ) and the new one installed LG dishwasher model xd3a15mb

I need to replace my integrated dishwasher, but the store doesn’t provide installation service. I’d need someone to deinstall the old one, remove the front panel, install the new one and attach the new panel. Delivery of the new one, and removal of the old one will be done by the store.

Hi! I’m looking for a pest control professional to help with a cockroach problem in my apartment. The issue seems isolated to the dishwasher area, and I’m noticing tiny baby cockroaches, which makes me think they’re nesting in a gap above or behind the dishwasher that I can’t access myself. I’ve tried managing it on my own, but the problem is persisting and seems to be getting worse. I have two cats, so it’s extremely important that any treatment used is safe for pets (especially cats). It’s a two-bedroom apartment, but I haven’t seen any signs of cockroaches in other areas — it appears to be contained to the kitchen. Please get in touch if you can help or have a solution that’s cat-safe. I’d love to get this sorted before summer hits. Thanks! Jenny

Smeg brand single top opening dishwasher for my restaurant is draining itself during in use

New kitchen (18 months old). Dishwasher is moving out from under cupboard. Possibly wasn’t properly anchored on install. Needs to be pulled out and reinstalled.

Tried to remove filter and clean out area where pump lives, would rather repair than replace if possible.

My built-in dishwasher (drawer style, located under the cutlery drawer) has stopped working.
 None of the front buttons respond - including power, lock, or start. It seems to have failed mid-cycle, as there’s a small amount of water still sitting in the base. Because it’s a built-in model, I can’t see the brand or model number.
 Looking for someone who can: * Diagnose why it’s not powering on * Check for possible water or electrical faults * Safely drain any remaining water * Advise if any parts need replacing or if it’s more economical to repair/replace Would love to get it back up and running soon - or at least know what’s wrong. Location: Erskineville
 Access: I’ll be home to assist / can provide flexible times.

Disconnect freestanding dishwasher and move it out of its spot in the kitchen into hallway (a couple meters)