Find a reliable appliance technician in Newcastle

Have a multi station home gym that needs some TLC to get working Non clunky.

Installing new oven however gas pipe from cooktop is blocking the way as previous owners did a poor diy job. Need to make it flush to allow new oven to fit in. Need to be done asap by certified gas plumber

My machine keeps beeping when I try to do a cycle - I’ve emptied the drain underneath and turned it off and on but not sure what the issue is exactly

Install basic resecurlating range hood with powerpoint

I have a Toro self-propelled lawnmower or working perfectly fine just needs a service and cleanup. Oil Change: Drain the old oil and refill with the manufacturer’s recommended grade (usually SAE 30 or 10W-30).  • Air Filter: replace the foam or paper element.  • Spark Plug: replace it to ensure a reliable ignition spark. • Fuel System: you may need to drain old fuel and clean the carburetor. 2. Blade & Deck Care • Sharpening: Sharpen and balance the blade.  • Deck Cleaning: Scrape out dried grass clippings from the underside of the housing.

Fridge turns on and then get warm and doesn’t stay cool

Washing machine won’t turn on. Have checked outlet, breaker box. Hoping it’s just a fuse but a I don’t know where to start.

Want rubber seal replaced on washing machine, it’s a front loader LG. You must order the part as well please. Happy to pay for the part but must supply docket.

Lg fridge top mount double door. Not cooling. Want sown one to diagnose

HISENSE 483L French Door Refrigerator is not cooling in both the fridge and freezer. It is still under warranty however I am overseas and looking for someone reliable and trustworthy to attend my house and complete a repair. I have a house sitter staying at the home.

Need to have a gas line and reg setup from 2 12 packs nitrogen and oxygen to my fibre laser 3kW

Need someone with a trolley thing to help me move my new washing machine and dryer to my laundry, and help me stack the dryer on top of the washing machine. Ideally would like this done today or tomorrow but happy to be flexible with time

I need a broken dishwasher disconnected so it can be removed tomorrow morning sometime. The dishwasher sits under the benchtop. I am not strong enough to undo the various hoses, etc. It could be disconnected/done after 4pm today, Tuesday 17 February or at 8.30am tomorrow, Wednesday 18 February.

Needing someone to urgently help loosen this nut/bolt so that we can disconnect the washing machine - very tight, awkward space, will need a spanner or another tool e.g. capable of gripping the relevant parts (diameter 3cm)

Need to replace cooktop, oven and bathroom vanity in my investment property (remove, supply and install). Cooktop: 65.5 cm (l) x 51.5cm (w) Vanity: 90 cm (l) x 84cm(h).

Need help with mounting tv on wall and installing washing machine and fridge please.

Install transfer fan between two rooms in roof cavity. Needs to be wired up to switch in room. Have all the gear for the job.

I need a certification certificate installed so I can get LPG bottles gas installed.

Modify Kitchen Cupboards for Dishwasher and Washing Machine Cooks Hill. Modify Kitchen Cupboards for Dishwasher a I’m installing a 45 cm dishwasher and a slimline front-loading washing machine under my kitchen benchtop (see attached photos). The sink will be replaced with a single bowl that fits the current cut-out size, creating space for: • Washing machine on the left • Dishwasher on the right I need an experienced cabinetmaker, carpenter, or handyman to complete the following work: Tasks: • Cut out the shelf, base shelf, and remove kickboard under the bench to make space for both appliances. • Modify the two cupboards on the right — one to be removed completely and the other trimmed down slightly. • Reapply the existing laminate trim I’ve already peeled off. • Cut the under-bench edge so the dishwasher and washing machine fit properly. • After the washing machine is installed, refit the kickboard neatly in front. • Install two side panels to contain the dishwasher and washing machine (I don’t have the panels). Appliance Dimensions: • Washing Machine: Height 850 mm | Width 600 mm | Depth 535 mm • Dishwasher: Height 866 mm | Width 488 mm | Depth 605 mm Notes: • Benchtop and single sink remain in place. • Plumbing and electrical will be handled separately. • Please bring tools suitable for laminate cabinetry. Location: Cooks Hill, Newcastle NSW Timing: Flexible. In 2-3 weeks please let me know I also have other handyman jobs around the, so I’m ideally looking for someone reliable who could help with those as well. Please include details of your cabinetry or kitchen modification experience when responding. Thanks

Our washing machine keeps moving / shaking violently during the spin cycle. Had a look online & we haven’t taken four bolts / stoppers of the back. I haven’t got the tool to take it off so it would be highly appreciated if someone were to quickly do this for us today.