Find professional window and door services in Surrey Hills

Remove front door with three hinges Trim bottom by about 1 to 2 cm or to the required length Plane and sand the trimmed edge so the finish is straight and smooth Refit door and ensure it swings and latches properly Tools and capability required Experienced with door trimming Track or plunge saw suitable for clean, accurate cuts Planer for fine adjustment Sander for smooth finish Clamps and dust control suitable for onsite work

Two of window frames are rotten and need to be replaced.

We are selling our house and need a few odd jobs done - we need two doors shaved down so they close properly - we need some edging installed around the trampoline (we have the edging) and we need the paving out the back repointed - might have other jobs TBC

This is a manual tilt door. With door height 2150mm. First beam high is 2150mm as well

Car backed into garage door whilst the door was going up. Slight bent on the garage door, need to straighten, or reasonably straighten. Garage door working fine, just fix aesthetics.

Installing 16 new internal doors (bedrooms, bathroom etc). 4 hinges per door. Flush (herline) hinges so no need to cut

Replace the fly screen on the double front security door

Hanging and fitting new unmodified doors to an existing wooden frame, ensuring a flush and smooth finish.

Fit a sureflap cat flap to door.

The sliding door hasn’t been moving smoothly lately. It feels like there’s friction between the door and the frame

Sliding door come off hinges

I had new solar panels installed with a new external inverter. The installers remarked that the inverter should be protected from the environment. I thus need either a wooden or a metal cover with opening to the front, made and installed. It will be necessary to inspect before manufacture. I have added photos. The approximate dimensions of the surrounding area are about 60 cm x 70 cm, and 40 cm deep, and the device is mounted onto an external brick wall.

Need to fix the window frame as shown in the picture. Length is 2.2m

I moved a shed from our previous house, so it is mostly assembled. Currently sitting in about 6 pieces. 4 walls and 2 roof pieces. I need it reassembled and bolted / anchored to the new concrete slab. Also to fix a few loose rivets from when it was moved. It's an Easy Shed Tall Gable Roof Garden Shed 3.00m (w) x 1.50m (d) x 2.27m I also need a small dog door installed in a hollow core laundry door, so the doggy door will need to be reinforced around the edges when the doggy door is installed. I have not purchased the doggy door yet, but was considering this one from Bunnings, unless you have experience with something better. Hakuna Pets Medium Black Super Tough Pet Door

See photos. Need to replace both side of the steps with new woodwork

Superior half of door latch is tilted outwards (refer to photos), which makes it troublesome when shutting. Require slight adjustment to realign it back.

The back door jams when trying to close

The screws in a front door hinge have broken.

Casement window won't shut since we moved in. Reason is the window sash lock(2nd picture) was set too high so when closing it hits the locking mechanism (3rd picture). Happy to fix any means possible so long as window closes. At the moment it leaves a small gap. Please quote me your offer - I'm happy to pay good money so long as you can fix it.

Front wire door needs new material / wire applied to entire door to fix hole in bottom right corner. Please see photos.