Find a professional sauna installation service in Central London

Need a qualified electrician to connect a 4.5kW sauna heater (BC45, 230V single phase) to an existing dedicated sauna circuit. Most of the heavy lifting has already been done by a previous electrician - the circuit is already installed and live in the consumer unit (B32 MCB on its own breaker labelled “SAUNA”), cable has been run from the board to the sauna room, and a Contactum rotary isolator switch is already mounted on the wall. The issue is the previous electrician hardwired the infrared sauna panels but didn’t connect the main stone heater, which has its own separate cable with crimped terminals that needs wiring in. The heater is already in position and ready to go - it just needs connecting to the existing circuit, either into the isolator or junction box that’s already there. Photos attached show the existing isolator and cable run, the consumer unit with the dedicated sauna breaker, the heater’s cable/terminals, and the heater unit itself. Happy to discuss on-site but it should be a relatively quick job given everything is already in place.

We are a sauna operator in North London. One of our sauna doors has a timber frame with large glass panel. We are struggling to get it closed and sealing in the heat. We would like someone (a door specialist) to come in and assess and adjust the door - thank you

Need a qualified electrician to hardwire a new Insignia MXOS1700 hybrid sauna inside my home. This is a hardwire-only unit - it has no plug and must be permanently wired to a dedicated circuit from the consumer unit. It's an outdoor-rated model being installed indoors so no external cable runs needed. Electrical Specs (from manufacturer manual): Harvia 4kW stove - 240V single phase 4 x far infrared heaters - 1,320W total (240V single phase) LED lighting, Bluetooth, control panel - 120W (240V single phase) Total load: 5,792W / 24.2 amps 240V single phase only - no three-phase or supply upgrade needed Requires dedicated 32A MCB and 6mm² T&E cable minimum (depending on run length) Scope of Work: Survey cable route from consumer unit to sauna location inside the property Install dedicated 32A MCB in consumer unit (spare way needed - can send photos of fuse board in advance) Run Twin & Earth cable from consumer unit to sauna Install local isolation switch near sauna Make final hardwire connection at sauna's electrical junction box Test, certify, and issue Electrical Installation Certificate (Part P compliant, BS 7671 18th Edition) I have the full Insignia installation manual and Harvia wiring diagram available on the day. Timing: Must arrive by 12pm Friday. Estimated job duration 1.5-3 hours. Note on cable run: The sauna is on the first floor, directly above the consumer unit on the ground floor. They share the same wall, so the cable run should be very short and straightforward - essentially straight up one level.

Electric sauna installation

Sauna connection 5 metre away from fuses

I’m converting a shed into a sauna and need advice on how to install electrics

Need a small 3kw sauna heater to be installed, have everything, and breaker switch and thermostat is in place, just need it connected and signed off

Need a wooden door handle that can be drilled into wood for the inside of a sauna and for someone to help improve the latch which is affected by a loosened seal

I need someone to paint and oil wooden fencing and decking on site in a location in Wandsworth for a public sauna site I am setting up. It will take approx. 3-4 hours

Infrared heater power cable came off, it’s not turning on as a result! Needs fixed today before 3-4pm

📍 **Location 1: 212 Brick Lane** 🔧 **Job Description**: - **Task**: Sauna electrical wiring installation. - **Details**: - **Heater**: 6kW (No wiring present). - **Requirements**: Wiring needed from the electric fuse box located one floor below. Access is available via staircase. - **Materials Provided**: 6mm armoured cable and fuse board. 📍 **Location 2: 18 Swinford Gardens (Brixton)** 🔧 **Job Description**: - **Task**: Wiring for an 8kW heater. - **Details**: - **Heater**: 8kW. - **Requirements**: Installation of wiring and a separate fuse unit. - **Materials Provided**: Armoured cable and fuse unit. 💰 **Total Cost for Both Jobs**: £500

Install steam room into bathroom - Due date: Flexible

Sauna unit heating elements recently replaced. The unit has power. However, control unit is not working and appears not to be properly connected. Unit is Helo Junior model installed in 2013. Ideally someone with experience with similar. Evening job but flexible with date. - Due date: Flexible

Qualified electrician please. Turning on sauna currently trips fuses. Need to investigate fault. Fix or suggest solution. May need to remove some sauna panels for full access to unit. 9yr old system. Finnish Helo sauna. - Due date: Needs to be done on Thursday, 14 December 2023

We are building a sauna set inside an art space in central London. We need someone who can help us to build 5 sets of timber sauna benches. The person should know carpentry as might need to source some extra timber to support the seats due to the uneven floor. Working time will be day times between 10am to 6pm on 18th May. With a potential of supporting us on 19th May as well. Price is negotiable if an extra day is needed. - Due date: Needs to be done on Wednesday, 18 May 2022

The corners are scratched - Due date: Flexible