Find experienced local fencing contractors in Cheshire

One whole panel has been completed.(with metal brackets). The half fence panel is too tightly in to fit brackets. I have bought two 4ft pieces of wood(2”/1”) to screw to trellis and fence panel on each side. I now need help.

Our garden gate needs repairing - the wood on the right hand side has rotted, meaning the door no longer closes. In the recent storm it has been banging and dislodged the brick in the wall the frame is fixed to.

I am looking for someone to repair fence panels and varnish them too as holes have started to appear

Fence has blow down needs repairing need new post Repair and materials needed

I had to remove two old concrete fence posts in my garden and I need new ones putting in. I’m happy to help with the task but could do with someone handy/experienced to lead the task.

Repair 2 fences and 1 Concrete post with 2 plinths

Fencing needed few panels in front garden and more in back garden. Just put whatever offer in I’m open

There are 4 ft and 5 ft and 6 ft panels which require cuprinol. The wooden gate is unsteady and requires attention.

We need to replace a few fences

Fitting around 30m of fencing

Fence panels replacing for now Will also need some painting and decorating A patio in the spring

Re build a small wall and put up a garden gate

The three wood posts was broken. The fence was unstable. I want to change to the three damage posts and fix them by concrete. Besides, must remove the old posts and old concrete. Prices are included three new posts, concrete and service charges.

NEW FENCE NEEDS PAINTING 18 MONTHS OLD 25FEET X20 FEET WIDE

Take down an existing leaning brick gate post make good the foundations and rebuild it straight.

Fence is leaning as several posts rotted and come out of the ground. Would like to try to repair/reinforce posts and save fence and ideally before the whole thing falls over ((so as soon as possible). Happy to buy parts and just pay for labour.

Attached are a few photos showing the iron gates we currently have and also the entrance to the courtyard (currently a makeshift wooden gate). The courtyard is very much in progress! Currently the small part of the iron gate (single person entrance) is not fixed to the rest of the gate, meaning it stays stationary when the whole gate is opened (and will block a part of our courtyard entrance). We are looking to fix the small gate to the rest of the gate, enabling us to open the entire gate as one and push it flush against the neighbouring wall. Pushing the gate flush is made slightly harder as the building next door have put some railings over their windows that jut out and have also attached fake bricks to their wall, meaning that our iron gates now cannot swing open fully (they're left at an angle). We are wondering whether it is best to either (1) shrink our gates slightly, add a post at the end which will enable us to swing our gates out fully, although leaving a gap between them and the wall, or (2) make our current gates bifold so that they fold in on themselves and therefore we avoid next doors window bars. Please let us know if you can help. Will

Need around 10 metres of continuous venetian fencing fitting and installing into a courtyard, with part of the fencing opening/functioning as a gate. We're after long-lasting, good quality wood that will give off a classy, contemporary look & feel. More info available on request - Due date: Before Tuesday, 1 August 2023

Remove and replace garden fence - Due date: Flexible

Remove 5 old conrete posts and 4 fence panels and install 5 new concrete posts in same position with 4 new fence panels. - Due date: Flexible