Find a professional hot water system contractor in East London

I've got a couple of heating/hot water issues. 1) Two of the radiators in my flat aren't giving out any heat, even though the rest of the radiators are working fine 2) The hot water in one bathroom doesn't get properly hot, unlike the hot water in the other bathroom (which gets very hot)

Our boiler is not producing hot water. This is a new boiler. Can someone assist

New shower was installed, hot water worked fine initially, but the shower mixer needs readjustment as there is less hot water and the temperature controlling dial is loose

replace old Ariston Classico direct hot water cylinder

Only very hot water is coming out of the shower. The thermostatic temperature control (red on the right) is not responding and does not reduce the temperature

I have an electric hot water cylinder with a failed thermo/stat and possibly a faulty immersion element. Can you confirm you’re G3 certified for unvented cylinders (if relevant) and provide a quote for parts + labour including any drain/refill?

The hot water will run hot then cut out and be cold, then run hot briefly and then cold again when running a bath. Last winter after a boiler service, they thought the issue could be the water overheating. The problem stopped in the summer when we weren't using central heating, but is back now. Please can you diagnose and fis the issue.

Need a plumber to fix a broken toilet flush in the upstairs bathroom, and sort the hot water regulator in a Victorian shower. Ideally someone available today, or tomorrow morning the latest.

Shower faucet - only hot water coming through, no cold water

Low hot water pressure from kitchen tap. Normal hot water pressure from bathroom tap and shower, therefore no boiler issue. Kitchen pipes might need replacing. I would like to install a new tap.

When you turn on the hot water tap of the bath not much water comes out

I've just moved in and my hot water isn't working (electric boiler)

I need a licensed plumber to inspect and repair my Main unvented direct cylinder (hot water system). The system is not working correctly and requires professional attention. Scope of work: • Diagnose the fault with the cylinder. • Carry out necessary repairs or replacement of faulty components. • Ensure the system is left in safe working order and compliant with regulations. Requirements: • Must be a qualified plumber with G3 certification (legally required for unvented hot water cylinders). • Please bring the necessary tools and advise if parts are needed. • Work should be completed to a professional standard and the system left clean and tidy. Please confirm your certification and experience with unvented cylinders when making an offer

I need someone to help build a portable hot water source. I am wanting to connect an instant hot water system to a pump and shower head. The water would be coming from a water tank on wheels, either a water cooler or a water tank on dollys. It would need to be moveable as the water source to refill it is by a door. It would also need decent pressure as it will be to wash hair so a good pump is needed. This means you would either get everything, or if you want me to get everything then I would want to discuss price. The photos I added are what others have done Thanks!

Hi, My tenants returned from vacation yesterday, and the hot water is not working. Boiler: Megaflo DD170 I need a plumber to inspect it. Address: E3 3NG Preferred time: Today after 4 PM, if possible. It was inspected last year and everything was fine Regards, Juraj

My boiler will be turned off due to cladding being replaced - I’m wondering if there’s a temporary portable option I can install? Please explain what solution you have in your reply Perhaps by installing something like this https://amzn. eu/d/5dNDNj3

Hi, I live in a tower close to Stratford station. Suddenly there is no hot water in my shower or other taps which has been working perfectly fine all along. I’m not sure if there is any issue with the HIU unit or what. Need somebody to come in and fix the problem.

Install a biget only please. Sorry for confusion

Hi there, I’m having an issue with my thermostatic mixer shower. The temperature control dial isn’t working correctly – even when it’s set to “1” (cold), the water still comes out hot. Also, when I increase the water pressure using the left dial, the water suddenly becomes even hotter. I think it could be a problem with the thermostatic cartridge or water pressure imbalance. Could you let me know: • If this is something you can take a look at • Your availability for a visit (I’m based in Dagenham East, RM10) • Your call-out fee and hourly rate • Whether parts are included or separate Thank you!

We have to dig soak away in our garden and connect to new rain water system. We will provide all materials And skip. Also need you to connect the system with the soakaway