Hire a trusted hob installation and repair service in Central London

Need someone qualified to come and fit a Gas Hob and a Oven for me in my Flat in E1 Whitechapel. Have attached photos of the two things I need fitted.

Sevice my gas burner on my hob

Put in a new fitted gas hob and oven. Not the freestanding cooker.

I just want some quotes on fixing my kitchen top and readjusting my induction hob to be straight. Company I bought the hob from messed up the installation.

When the gas hob is burning there is an orange flame coming from the burner. We belive that it is a potnetially blocked burner or the air to flow ratio is off.

Replacement of a cracked electric hob, 4 zones, 60cm with new (will be provided)

The hob turns on, but it doesn't heat up. The brand of the cooker is Bush.

I have two induction hobs that need to be installed and connected. Pic Attached Need all necessary equipment

Job Details I recently replaced a gas hob with a Bosch Series 4 PIE631BB5E induction hob. An electrician installed a new 6mm cable and connected to the existing 32 A breaker that was already installed and correctly distributed before. The circuit was already in place as expected, and no other alterations were made. The worktop cut-out is ready, but the hob is not yet connected or mounted. I now require a qualified and Part P-registered electrician (NICEIC, NAPIT, ELECSA, or equivalent) to: Inspection & Verification Check that the connection from the consumer unit is safe and suitable for the hob. Confirm correct cable type, sizing, earthing, and protection (MCB/RCBO, RCD compliance). Verify the 3-core cable is suitable for this hob model and that no 5-wire connection is required. Check that the hob’s internal live terminals are correctly bridged for single-phase installation as per manufacturer instructions. Installation Position and secure the hob in the existing cut-out. Connect the hob safely to the supply. Testing & Certification Perform full safety tests: continuity, polarity, insulation resistance, and earth loop impedance. Issue a Minor Electrical Installation Works Certificate (or Part P Building Regulations Compliance Certificate if applicable). Requirements Must be registered with a recognised Competent Person Scheme (NICEIC/NAPIT/ELECSA, etc.). Must be able to issue the relevant electrical certification on completion. Quote must be inclusive of VAT and cover: All inspection and testing The connection and installation of the hob The required certification Labour

I need to replace and dispose of a gas hob and to install a new one that is already at home

I need a gas safe registered plumber to carry out a gas safe inspection of a property and also replace a small 4 burner gas hob (I will provide the hob)

1.Install AEG HGB64200SM 60cm Gas Hob - Stainless Steel 2. There is also an electric plug close by that needs to be covered with a metal protection box/blanking Image of hob that needs replaced and the switch nearby is attached

Hook up integrated hob and washing machine, need someone certified and competent! Simple in and out job I’m also a tradie myself, so no bs quotes. Have loads of contracts running so LOTS of work for the right person!

Install gas hob and recycle previous one. The wood on the side of the hob needs to go for installation and made good. As per second image. First image is for the hob. Certified engineer required

The spark has broken that lights the hobs on our Bosch gas cooker. Can someone repair it please? Thanks

I need to install an electric hob

I would like to integrate a hob and oven. I would like someone who has experience with this and has access to materials and tools to get this job done. Open to advice.

Need someone to install a gas Hob, New hob already on site, just needs hooking up. Thanks

Our electric hob is cracked. We have purchased a replacement and need the old one removing and the new one installing

We already have the new countertop, just need the old one removed and disposed of, the new one placed, and the sink, tap, and hob replaced and reconnected.