Hire a trusted appliance repair service in Islington

1) I need someone to help me to fix the door of the oven which is at a slant. 2) the sink screw needs tightening.

I need my Sage coffee machine fixed. It is not producing water out of the steam wand or the hot water valve. Also leaks out of the bottom.

The washing machine is stopping halfway through cycles, not draining or spinning, and leaking water from the filter area. I checked the filter as advised, but there is a blockage in the pump that I cannot safely remove. The appliance is unplugged.

Small Liquid Damage to treadmill. Works few seconds, then repeats error ‘E06’. Even after many on and off tries. Unscrewed & dried compartments also, yet after few seconds, Error.

My Sage Barista coffee machine has stopped producing steam and no water comes out of the hot‑water outlet. The group head still has water coming out, but the steam wand doesn’t click or activate at all. I’ve already cleaned and descaled the machine several times, so it seems like the issue may be with the steam solenoid valve or a related internal part. I’m looking for someone experienced with espresso machine repairs who can diagnose and fix the issue.

Cooker hood touch panel not responding, Falmec lumen wall mounted cooker hood, 3 years old.

loss of water pressure and can not current use machine

My Hisense washing machine is showing an F03 error. This usually means the drain/filter at the bottom needs to be opened and cleared (likely a sock or debris). I need someone to open the bottom drain/filter access and drain the water This is a simple job. No parts required.

Machine emptied onto the utility room floor 30 mins before end of programme. This was my first time using it in a new home. Possibly the pump has come loose? It is Hisense.

Fridge turned off after heating up, consulted other who think it may have ran out of gas.

Machine is not producing water through the group head or steam wand. No steam output. Pump runs, but nothing comes out where it should. --- When the machine runs, water comes out of the clear inlet hose instead of going through the system. This strongly suggests a blocked or stuck solenoid valve or a blocked thermal block (boiler) inlet. --- 📌 Likely Cause A stuck or blocked 3-way solenoid valve This valve directs water between: the brew head the steam circuit and the drain path If stuck, water is diverted incorrectly — often back into or out of the inlet area. --- 📌 Key Component You Identified You circled a fitting near the solenoid-to-thermoblock connection — this is part of the water path going into the boiler. This area is a common point for: scale blockage a stuck solenoid or a jammed one-way valve Any of those will cause water to backflow

When I press the button for my oven the flame ignite but as soon as I leave it the flame turns off.

Fix the plug behind the washing machine

Hot point introverted washing machine F05 Fault. Have checked filter and it’s fine. Possible pillow fluff stuck somewhere.

There is a problem with my gas oven, when i turn the button round it ignites the flame for the oven but once i leave the button, the flame turns off

Samsung Fridge-Freezer – Fridge Not Cooling (Freezer Working Fine) Description: My Samsung fridge-freezer powers on and the freezer is working perfectly (–19°C), but the fridge compartment isn’t cooling properly. The display and compressor work, and I can hear the fan running, so the issue is likely with the air damper or temperature sensor (thermistor) that controls airflow from the freezer to the fridge. I need an experienced fridge/appliance repair technician (not an electrician) to diagnose and repair the problem. Model type: Samsung No Frost fridge-freezer (Smart Eco System, digital display on the front).

We need help fixing our delonghi la specialista coffee machine. We found it leaking from the bottom of the machine a few days ago and can’t figure out what the issue is.

Fix my dishwasher, which isn't draining properly

I have a F05 fault showing. Filter Checked and Clear. Water is leaking and machine is locked at flashing fault signal. Looking for Honest and reasonable quotes only please. Thanks

Zanussi ZDT12011FA dishwasher is not draining at the end of cycle. I've taken it out from under the counter and have inspected the wastewater pipe and pump but cannot see any issues. Now the dishwasher beeps 12 times and will not start a cycle.