Find a professional verandah installer in VIC

a 6 metre x 2.6 metre wooden verandah. It has a varnish on that will need to be sanded off.

Qualified carpenter to replace 112mmm x 112mm verandah post and 65m x 184mm beam.

Remove existing concrete verandah and pathway and re-set bluestone foundation and lay base for tiling

Timber post supporting my upper level verandah has rotted at the base where it meets the planter box and garden bed. Need the rotted section cut out and a galvanised post stirrup installed so the post sits clear of the ground. Scope: - Prop the beam above while working - Cut out rotted lower section of post - Install galvanised post stirrup - Splice in new treated hardwood section to match existing - Fully seal and waterproof: treat all timber ends, seal the stirrup base, and ensure the planter edge is watertight to prevent any future moisture ingress - Touch up paint to match (paint will be supplied) Important: - Post is structural (supports upper floor), so please confirm you're comfortable with load-bearing repairs. Located in Elsternwick, easy side garden access.

Hi, I am after someone with decking experience to help set up a timber deck over this existing verandah, as minimal as possible framing underneath as this is a concrete slab and I don’t want to create a large build up of the level. Please in your description tell me how you would approach this and photos of previous experience and what your price includes. It is roughly 24sqm

I need this old vinyl taken off the front fascia of the shop. The road is a clearway until 9am and we open at 11am so must be done within that time or else can be done before 7am.

Scope of work: -Supply and install a 15A weatherproof outdoor GPO (IP-rated, suitable for outdoor use) -Switchboard is located internally and less than 5m from proposed location of GPO (on opposite side of meter in photo) -Install on external wall under verandah (protected but still exposed to elements) -Ensure circuit is suitable for continuous EV charging load -Upgrade circuit/breaker if required (please advise if additional costs apply) -Test and ensure safe operation Requirements: -Must be a qualified and licensed electrician (VIC) -Must provide a Certificate of Electrical Safety (Compliance Certificate) upon completion -All work must comply with Australian standards

Painting above verandah on facade of house. Paint to be provided by us

I need a young guy(welder) that can help me install a steel frame. I'm the metal fabricator and need a hand to put the frame in place and would better if he understands what I'm talking. Payment will be per hour, minimum 7 hours a day per 2 days. Must have abn and release invoice

Need to install a verandah extension shed. Size 1000 mm wide and about 19000 mm long. I have attached a marked drawing for reference.

Painting of New Verandah Roof Frame. ~ 8m x 4m 1 x coat of sealer 3/4 completed. Will require this to be finished. The need to apply 2x coats of top coat. I can supply ladders and paint (Solaguard).

We have two large wooden sliding doors from the living room to the verandah, they have been extremely heavy to slide - I have tried to fix but the bolt has come out of the overhead trolley and I cannot fix this. I would assume the doors need to be lifted and would like the wheels on the trolley inspected to see if these need replacement.

4 holes around verandah left from underpinning needing to be filled with concrete and 1 in driveway. Approx 0.5 cubic metres total.

We want to build a verandah for our first floor balcony for some waterproof shade. Size roughly 6m * 3.2m. Can do site inspection before we proceed

Chris can you call regarding my leaking roof thanks heaps

painting a back verandah roof steel frame and posts.

I need to change few verandah posts

Fix verandah replace old rotten timber. Install new roof and gutter.

Installation of cement sheet ceiling in verandah. Must have insurance

Finish Verandah. I have all materials, see photos