Find a professional balustrading contractor in VIC

I want to cut back this stairs to match the width of the opening and then install a timber balustrade on the open end. Overall treads is 90cm and overall rise is 60cm.

I have a split level home and have a balustrade going down my stairs. I have already scuff sanded and primed the balustrade but have realised this is going to require more skill than I have to make it look nice in the end. I think I have done all of the prep work so should be straight forward for a good painter I hope. It now needs a light sand over the primer and then 2 coats of the top coat which I will supply. I have already masked off as well. I don’t need the stairs painted as they are being carpeted but I need the job done before carpet goes in on 24 April.

We’re installing a front yard balustrade and gate and need a steel post installed to support and stabilise the structure. Scope: - Supply and install 1 x steel post - Post size: 100mm x 100mm (dressed smooth) - Install depth: 400–500mm below ground level (concreted in) - Finished height: 1500mm above ground level - Ensure post is level, plumb, and suitable for fixing a balustrade/gate to Notes: - Task includes sourcing materials (post + concrete) - Easy access to the install location

18 month old external stairs. Timber balustrade and timber handrail require sanding and re-staining. Main set of stairs going up 1 storey (see photos) plus a second small 3 step stairs outside laundry. The main set of stairs face the sun and timber sustained a lot more wear and tear. The steps are made of steel, so the job is only for the balustrade and handrail. Please see photos.

Looking for a quote for a domestic timber balustrade and handrail. The balustrade would have 3 sides to enclose a stairwell opening on the second story of a townhouse (3.2m x 1m, 1.1m x 1m, 2m x 1m approx). Handrail would be approx 2.4m long. Thanks

Painting of doors, skirting and balustrade, window sill from beige to white across 3 bedrooms and landing.

Hi I’ve got a job about 50m total length, need quote for supply and install 12mm glass balustrade

Balcony Balustrade loose, Mullavey place, Werribee. The balustrade on the long side of the balcony is found to be loose ( see photo ) which may pose a safety risk. Repairs should focus on securing the balustrade firmly to prevent any further loosening. I am looking for some one who can fix this and who is very familiar in this job. I have not seen the issue in person since I live one and half hour far from Werribee,( neither has a clear photo) Photo and above details are from the safety inspection report. I am looking for someone who know how these balustrades are secured to the wall/ structure and can do an easy fix and provide an invoice/ certification that its done properly. Please quote.I can be on site to give access to carry out the job at agreed time . Thanks

I’m upgrading an internal stair balustrade and need a carpenter/joiner to install the timber rails and corner transition detail. I have added photos of current layout, and a render of what I want installed for reference I will supply all materials (timber posts already installed or ready to install, metal balusters, timber rails). I mainly need help with accurate cutting, fitting and finishing. Install top rail (timber approx. 90x45) along: stair run (angled) landing (horizontal) Form the corner transition at the stair/landing post, including: angled stair rail cut short connector piece between rails (as per reference image) ensure clean, tight joins Install bottom rail (timber) to suit metal balusters Drill and align holes for metal balusters (or assist with layout if preferred) Ensure: rails line through cleanly consistent heights neat finishes (no gaps/misalignment)

The steel cable railing from our balustrade has frayed and come loose and the fastening has come off (see pictures). We need the cable to be reattached back into place.

3 balustrades damaged by cockatoos have to be repaired and external awning of a small window needs to be screwed and light bulb needs to be installed

I need to weld a few spots on the staircase balustrade inside the house and 3 legs of the poll aluminium fence. There are approx 6-8 spots on the staircase balustrade to be welded.

We need glass created and installed by an experienced glazier to the top window above our front door and to the balustrade next to the set of stairs that takes you to the rooftop of our house. Window measurements 880mm by 345mm Balustrade measurements 1750mm by 1750mm triangle

Weld balustrade together, currently in three sections and needs to be cut & welded so can be installed on front porch. Welds to be ground back flush at completion.

Looking to install Glass Balustrade on the front entrance stairway with handrails. Total length approx 2 meters

Install wire balustrade on granny flat staircase, 4 steps in total, on both right and left side. On the landing and staircase handrail

4 small welds required to secure the Wrout iron balustrade. Photos attached.

Supply and deliver everything to paint (2 coats) my deck balustrade (~6m / 50 odd balusters). Will need a bit of prep inc a bit of bog on the top rail. Use woodland grey for top rail and posts and half strength for balusters. All sides.

Minor Stair Balustrade Welding Repair as pictured in 2 spots

Need to take down wooden balustrade around veranda.