Find a professional built-in wardrobe contractor in QLD

I need a built in wardrobe with shelves, drawers and storage space. Floor to ceiling

Built in wardrobes needing relining / plastering. I want the backs and sides done with cement sheeting and the ceilings to be done with gyprock aquacheck. I have all the cement sheeting and aquacheck needed. I have cement screws and plasterboard screws, a big bag of base coat 45 and joint tape. I need someone to install and get these all done and prepped ready for me to paint before I get new wardrobes installed. Approx measurements: Linen 2370mm long 2460mm high 440mm deep Bedroom 1 1650mm long 2460mm high 540mm deep Master bedroom (need all done except one section needs to be left open for structural work 3700mm long 2460mm high 540mm deep

I have standard single shelf in walk in wardrobe. I need a custom job done to add shelves, drawers and hanging space

We need to install a larger access door for Air conditioning work to be carry out. Remove small section of wardrobe, install larger access door approx 900mm x 1450mm hinged on the long side could also have 2 swinging door in 1 frame. Replacement door need to be the same design as existing door. Removal all front door to keep existing wardrobe shelving. No need to recharge door will have it as open wardrobe. I want a quote for finished product. Including supply of materials labour plaster paint. I do have a painter that can do small plaster repairs so I would also look at itemised quotes showing with and with out paint or with and with out plaster.

200L 236H 58W IKEA Pax with sliding doors. Carpet and skirting boards already removed. Require the wardrobe be fixed to wall without visible gap, assembly finished and skirting boards re-installed.

Build built in wardrobe inserts for 3 x 1800mm cupboards, including shelves

I have an Ikea Pax wardrobe assembled already but am needing a handy man to make it look like a built in wardrobe. The pictures attached are an example of what I’m trying to achieve and what I imagine needs to be done. You can also see the images of the current empty space and the size of the wardrobe in the other picture. This needs to be finished to a high standard.

Pick up two flat packed wardrobes and install them in bedrooms

Removal of one freestanding wardrobe 2.4m wide x 2.2m high. Currently has 2 mirror sliding doors but someone else will be collecting them. Additionally, need to demolish a built in wardrobe, 2m wide x 2.6m high. The actual built in wardrobe is made from timber, however the bedroom walls are asbestos cement sheeting so care needs to be taken not to disturb this during demolition. We would like all waste removed from our property too. Thanks!

I would like two built in wardrobes made similar to the one I have

I need this: https://www.bunnings.com.au/lugna-1500-1800mm-white-package-2-opening-built-in-wardrobe-package_p0179417 The description is: Package 1 to suit opening size 1500-1800mm. 1 x shelf unit Package 1 contains: 1850H x 450W x 450D 4 x adjustable shelves 1850mm high divider support Hat shelf 1800W x 455D with support battens Hanging rail and fixings Installed in the wardrobe of a non main bedroom. The advice from previous sellers is to get a professional to help, so that's what I'm doing

I have 3 small built in wardrobes that I want redone I would be open to either using ikea wardrobes or someone building them if they are a carpenter The week they need to built in is w/c 30th June

Need to get rid of the built in wardrobe (including top bim)and take all the pieces away. Wood is screwed and glued on concrete wall.

I want shelves in the built in cupboards in the bedrooms

Instructions recommend 2 people to complete.

Scope of works -supply and install materials with labour to complete the following tasks. -Bedroom 1 robe cabinets, 3250 mm high x 3500 mm wide x 600 mm deep. -Bedroom 2 robe cabinets, 3250 mm high x 1275 mm wide x 600 mm deep. -internal cabinet carcasses ‘white laminate’, doors ‘2-pack finish’, colour to be confirmed. -internal lay out to be designed to confirmed

I am removing an existing built in wardrobe to replace it with a built in look alike that has ikea pax system wardrobe, cupboards and a desk

Need someone with some carpentry skills to create a new frame for a built in wardrobe and move track forward and install sliding doors in track so as to increase the depth of the wardrobe.Photos below give an idea of what I'm after. I'LL PAY FOR MATERIALS NEEDED + $200.

Build in cupboards and hanging rails to existing walk in robes. Don’t know how much - need to inspect

I have a standard mirror built in wardrobe. The clothes rail was mounted under the shelf however due to weight of clothes, it has ripped out of the mount I would like this rail reattached in a way which is reinforced and stronger than the original method. What do you recommend is the best way and how much please? (Ignore the price I have written as it will depend on the type of fix you recommend) Wardrobe length is 2m. Rail is still there