Find professional local plasterers in West Melbourne

Need someone experienced to demolish and remove an internal partition wall. Job details: Partition wall is approximately 8m long x 3m high Wall is made from timber framing and gyprock/plasterboard Demolish and remove the wall safely Remove all waste/rubbish from site Leave the area clean and tidy after completion Please provide a quote including: - Labour - Tools/equipment required - Rubbish removal/disposal - Your availability - Whether you have completed similar demolition or partition wall - - removal jobs before - Prefer someone reliable, experienced, and careful with commercial/showroom spaces.

There is a small part of the plaster in the ceiling of my garage that I would like to have repaired / replaced, damaged area is around 70cm x 30 cm in size, thanks

Small cracks and a small patch correction

Supply and install new plasterboard ceiling sheets (approx. 25 square metres) Repair / replace cornice where required Prep and paint entire ceiling with white ceiling paint (2 coats preferred) Remove and dispose of waste materials Work around existing light fittings and split system A/C Ceiling is already exposed as shown in photos. Timber framing is accessible. Please provide Estimated timeframe. Preference for licensed / insured trades with previous similar work and photos/reviews.

Doing renovations and need a plaster to install 135mm VIC style cornice to some sections (approx 45L/M) which have been removed due to renovations. Cornice are Victorian style all material supplied by myself. Prefer to meet onsite for quote Or if u like send me offers. Also I’m happy to assist the entire time. Approx 4-6 hours work

I have de-comissioned an old evaporative cooler on the roof. It's been removed including the ductwork in the ceiling. But now I have 6 ceiling vents which need to be plastered and made smooth ready for painting I have already started it but it's hard for me because i got a sore neck and can't finish it. So I have put new plaster in 3 of the holes but I haven't made it smooth yet. The other 3 vents are untouched and need to be removed. But it's easy, just remove the clips which hold it in, or just break the vents with some tools. I used channel grips. Took me 2 minutes So to summarise: Finish plastering 3 holes which I started. Then remove 3 ceiling vents and re-plaster over the holes. Please make everything smooth and ready for paint. (I have some plaster sheets here ready to go and a big workbench outside to use. I also have a small amount of tools to use if you need I also have plenty of timber of all sizes if you need it. Not sure if you need it or not )

Re plaster this wall and paint. Paint will be provided.

Some to fix holes in my plaster hole in my wall

Meed wall plastered and paint match. Small indent near front door to patch 5c size piece. End of rental, real estate agents will be there 11am arrival for job.

Hi, I need help in repairing a hole in an internal plasterboard wall (see attached photo). I can purchase materials from Bunnings, but I’ll need you to confirm the exact items/specs required

Hi, I had a bit of a water leak and the plaster near the manhole or entry to the ceiling has cracked up and hanging a bit from one side I just want a patch work to be done. Don’t want to over spend and do the whole ceiling, as this is a business based in Pacific Werribee Mall and it is in kitchen area. No need to colour Match either,

I need someone to even out the plaster. I already started plastering but its not 100% even so i need someone to even it out for me Offers are welcome as i have no idea how much is it

Dry wall repair and paint.

Bathroom reno needs an awesome plasterer. Check the pictures

I need 4 drill holes patched and filled. One will likely need to be cut larger. Please note, there are two shelves directly below the shelves that cannot be moved.

Currently opening a yoga studio in Werribee have had all the walls and hallway framed up. All external walls will have cladding, looking for someone to plaster the internal of three rooms including roofs, one length of a hallway and the internal of a kitchen. Measurements are just under 200 m² , costing to include plaster, materials, removal of rubbish, thank you. Looking for a price per square meter.

Plasterer to square set using steel and sand. 3 areas required Hallway 12 metres x 1 metre Bathroom 3.2 metres x 2.5 metres Powder room 3.5 x 1 metre Cornice has been removed and job is ready to go.

Plaster work on the edges of the dry wall has crack due to some weight leaned onto the wall. Due the pressure applied, it left a crack around 60 cm. It caused revealing a metal corner bead (see in pictures) Need this to fixed properly and professionally. I have paint but other materials should be considered the task.

We have patched a bunch of holes throughout the house. Bottom and top coat plaster. Just need to have them all sanded ready for painting

Need fix this broken plaster and paint its Approx 1 meter *700 MM.