Find an experienced handyman in Warburton

An old 1970s Stegbar sliding door glass will not close as the rollers on the bottom on the track are broken will not lock either. - Due date: Flexible

need stainless steel fitted to wet area and door closer fitted ,maybe little painting - Due date: Before Sunday, 10 September 2023

Odd handyman jobs cut tiles fix door lock take trims of kitchen cupboards put new trims on put new hinges on kitchen cupboards - Due date: Flexible

We’re looking for someone to remove the two exciting windows, widen the opening, rearrange any electrical work and reinstall a Sliding door system in our weatherboard hole in Warburton. As seen on the pictures it is the outside wall and therefore load bearing/structural. Please provide an offer for the end to end job including plastering inside as required. New sliding door system: 3600 x 2100 x 225 - Due date: Flexible

We need someone to install our kaboodle kitchen - Due date: Flexible

Simple whirlybird installation on a garden shed. Metal is 20 gauge so needs a cutoff saw or cutting disk to make the hole in the roof. I can fit the rest, just need the hole cut as I don’t have an angle grinder - Due date: Flexible

Need a 25mm hole filled in cement sheet roof

Need 3 x roller blinds to be installed. 90 x 210cm

I have two day/night roller blinds to be installed. They are 150cm by 150 cm. - Due date: Flexible

If I were to pay for a day of labour (not necessarily all done in the same day) what of the following tasks could you do for this shed? -remove branch leaning on roof -repair a bit of damage at back of roof - replace 'window' -level the floor and a semicircular area in front -add loose topping (sandy gravelly stuff?) to floor and area in front

Replace ceiling fan in lounge kitchen

I’m needing three bifold door panels installed. The frame is installed already :) located in warburton

We have a home in Warburton Victoria with metal fireblinds on every window. The largest picture window in the main bedroom has a approx 20 mm flat nylon retractor cord that is used to raise and lower the blind from inside the bedroom but it frayed and snapped during lockdown last year leaving the blind down ever since. The window is a second-story window with a corrugated roof on a verandah beneath the window but the roller box for the blind is about 12 m from the ground. I need someone experienced and insured for work at heights to replace the cord and get the blind working properly.

I need 5 bricks replaced around a new fireplace.

Needing our wall in our laundry to be plastered, we are needing the plaster to buy the plasterboard and all materials. Located in Warburton will attach a photo

Shouldn’t take long at all I’ve just made a mess and have no idea what I’m doing haha

Needing a professional electrician to help with what we think may be a wiring issue my partner installed Bluetooth lights into our retaining wall and half are working and half are not. Brand new so hopefully needing a professionals opinion

Need zippers replaced on 2 backpacks. . Not high quality packs but if feasible would prefer too repair and reuse rather then throw out

Hinge is missing a screw and needs to be replaced. It's a very simple job probably take less than ten minutes. You will need to bring a few screws to match up.