Find an experienced handyman in Sutherland Shire

Replace two fly screens on doors before end of lease

Hi there I am helping a family member clear out a property that is in very poor condition. I need help for 2 hours on Fri from 1-3pm please. There are a few tasks: - there is a deceased dog in the garage that needs to be removed and area cleaned - there are 3 Venetian blinds that need to be taken down (I have a rubbish collection coming on Monday so you don’t need to take the rubbish away) - I need a basic curtain rail hung on one window (I will supply basic fittings from ikea) - there is a bush out the front that needs to be trimmed Please bring own drill or other equipment required Thanks

I have a five shelf pantry unit that requires assembling. A couple of the pre-made holes are slightly damaged due to the pantry being dropped when originally being assembled. I have all the necessary parts except it may require some additional screws or similar to reinforce where the damage is.

Fly screen needed,doesn’t need a crimsafe, just an ordinary fly screen.

Handyman to help unpack after moving and hang tv and prints

I want to put an awning 2.4m long and 1.3 to 1.5m wide for my front door to cover the rain please see the pictures below for the style and the front door

Looking for someone to install a 850 x 850mm Covey Wall to Wall Diamond Frameless shower screen. Will be installed into tiles on wall and floor. Must be professional, licensed glazier to maintain warranty. Will need to provide copy of glaziers license. Please don't quote if you're not licensed as we will not be able to use your services. Responsible for installing all parts of the screen and waterproofing the screen. Also for clean up etc and provision of own tools. Price indicative only. Please provide a reasonable quote.

1 - the antenna fell down last night in the storm so it needs to be reattached to the concrete wall. 2 - the screws used to install it were to small, so you need to drill out the existing holes for bigger screws 3 - the height is approx 7m as its on the apex of a two story duplex 4 - access is ok

I have a ducted aircon for my whole downstairs with 4 sections and come control units which I do t feel is working g anymore - it’s operating like a fan more like

I’m looking for an experienced and careful Airtasker to help with furniture assembly and wall hanging, plus a small balcony fixing job. Scope of work: 1. Flat pack assembly Assemble 2 × flat-pack cupboards New, boxed, instructions included Indoor apartment job Possibly wall anchoring required for cupboards 2. Wall hanging (inside apartment) Hang 2 mirrors Hang 4 framed artworks Secure fixings required (plasterboard) Happy to confirm placement before drilling 3. Balcony wall fixings (DOUBLE BRICK) Secure 1 round metal decorative wall plate Fix 1 natural timber branch horizontally to balcony wall (decorative only – to visually disguise existing conduit) Balcony wall is double brick Care required around existing electrical conduit Please bring suitable masonry fixings Important details: Apartment + balcony setting – care with walls essential Plasterboard/concrete inside, double brick on balcony Electrical conduit present on balcony wall On-site parking available No heavy lifting required Location: Gymea, NSW Timing: TODAY preferred, or tomorrow morning What I’m Looking For Proven experience with: Flat-pack furniture Hanging mirrors and artwork Double brick wall fixings Anchor near electrical conduit care Own tools (drill, level, masonry & plasterboard anchors) Tidy, methodical, reliable Please mention similar jobs you’ve completed. 💰 Budget $280 total. (Open to offers for immediate availability)

Need to install a bidet in my bathroom

I’m looking for someone experienced with roof racks / platforms to finish installing and correctly align a roof rack platform on my vehicle. Vehicle: 2024 Mitsubishi Outlander Exceed Equipment: Rola Ridge Mount rail system (TKRM315874 – installed) Rola roof platform/tray (assembled but not mounted) The Ridge rails are already installed correctly on the vehicle. The issue is that the platform mounting plates are not aligning with the Ridge rails — front and rear spacing doesn’t match, so the tray won’t sit down and bolt on correctly. The platform itself is square (diagonal measurements match), so I believe this is a mounting plate orientation / positioning issue, not faulty parts. What I need done; Inspect current setup Correctly orient and position the platform mounting plates Align the platform to the Ridge rails Secure and torque everything correctly Confirm fitment is safe and correct There’s been some confusion on my end during install and I’d prefer someone who: Has installed roof racks/platforms before Understands rail-mount vs crossbar-mount systems Can quickly identify incorrect plate orientation or slot placement All parts are present, this is not a fabrication job, just correct fitment and install.

We had some water damage in ceiling, and we made a little hole in it in the course of inspections. Now we need a person to sand, plaster and seal this section. It’s appx 10 inches X 10 inches. We have ladders etc here which you can use and the space has good access. Located in Oyster Bay, 2225. Would like to get done before Christmas- same as everyone 😅

I need someone to fully assemble a sand pit with canopy. Own tools required

Need an electrician who can remove this ceiling fan and install a new lamp

Fix a door, patch repair and paint.

Need One Wall Gyprocked – Quick Job Hey legends, I’ve got a single wall that needs to be gyprocked. Frame is in good condition — just need someone who knows what they’re doing to sheet it up, set it, and get it ready for paint. Details: • One internal wall • Supply and install gyprock • Set, sand, ready for paint • Flexible with timing but sooner is better If you’re neat, reliable, and can knock this over without dramas, would love to hear from you. Cheers!

Hello, We are looking for an experienced handyman, carpenter, or door specialist to repair a faulty sliding door at our retail store, in Westfield Miranda. The Issue: The large, top-hung sliding wooden door to our optometry room is jamming and will not slide closed properly. Staff must physically lift and force the door to get it to move along the track. The Job: The task is to diagnose and repair the sliding door mechanism to ensure it operates smoothly and effortlessly. The scope of work will involve: 1. Inspecting the top-hung track, rollers, and door alignment. 2. Identifying the root cause of the jamming (e.g., worn or broken rollers, a misaligned track, an issue with the door itself). 3. Carrying out the necessary repairs. This may include adjusting the track, replacing the rollers/trolleys, or making adjustments to the door. 4. Testing the door thoroughly to ensure it slides smoothly and easily from open to closed without needing to be lifted or forced. Please note: The successful contractor MUST supply any necessary replacement parts (e.g., new rollers, brackets). The cost for these materials must be included in your final offer. Requirements: - MUST have proven experience with repairing top-hung sliding door systems. - You must supply all your own tools AND all necessary replacement parts (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Westfield Miranda, 600 KINGSWAY, Miranda, 2228 (Exact location will be provided upon acceptance of the offer). When: We need this repair completed as soon as possible. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the cost of any potential replacement parts needed for the repair. Thank you.

Repair carpet in apartment

Experienced Roller door tradesmen needed to install brand new manual roller door to our newly built shed, instructions, all materials and roller door here ready to go. Easy access. Note; door manual not electrical.