Find a professional internal door contractor in Inner South Melbourne

Install 7 New Internal Doors, Hinges & Door Handles I’m looking for an experienced carpenter or handyman to install 7 new internal doors in my home. To make the job easier, I’ll complete the preparation beforehand, including: * Removing the existing doors * Patching the existing hinge rebates on the door frames * Preparing the door frames ready for the new doors to be installed I will supply: * 7 x new internal doors * 7 x sets of hinges * 7 x door handles and latches The job includes: * Trimming each new door as required for a perfect fit * Marking and cutting the hinge rebates into each new door * Installing the hinges to the doors and door frames * Hanging and aligning all 7 doors * Cutting the holes for the handles and latches * Installing all door handles, latches and striker plates * Adjusting each door so it opens, closes and latches smoothly with even, professional gaps Location: Moorabbin, VIC Requirements: * Experienced carpenter or handyman with previous door installation experience * Own all necessary tools (router, plane, hole saw, chisels, etc.) * High attention to detail and quality workmanship * Please include photos or examples of similar work if available Please quote for labour only, as all doors, hinges, handles and hardware will be supplied. (Open to offers from experienced carpenters or handymen with previous door installation experience.) Door Dimensions Master Bedroom 810 x 2050 2nd Bedroom 811 x 2040 3rd Bedroom 808 x 2045 Toilet 758 x 2020 Study 820 x 2050 Bathroom 720 x 2035 Hallway 808 x 2048

I need 7 x standard sized internal panel doors to be installed. Old doors are being replaced. Sizes are standard as per the attached image. 2nd image shows the existing doors which I will remove. I supply the doors, hinges and handles.

Internal laundry door/door frame/handles installation (door/hardware supplied) Also replace 2 door handles on other doors

We have an internal door that has a hole in it - we have covered it up with a timber kids name plaque that can’t be removed without further damage to the door. We have had advice that the best solution will be to replace the door and swap over the hardware to the new door. The current paint finish appears to be a 2 pack finish in Dulux Lexicon Half. Door size is standard size: 2340 x 820 x 35 hollow core. We’d like someone who can ideally apply the spray paint finish to the door and install the door with existing hardware retained.

Full height bathroom door making a noise when closing. It has come off its hinges and needs to be refitted.

**Important: I have not purchased the cat door kit yet, so would not require this service for 1-2 weeks. Just seeking quotes currently.** Looking to install this circular cat door on an internal hollow core door. The kit, including door, hardware and cutout template, will be supplied. The task requires a jigsaw or similar tool.

New door and hardware will be provided.just need new door replaced

One door is jammed - handle turns but won’t open. I tried taking the handle off but it didn’t fix it, so may need the latch looked at too. Photos for reference

I have 4 internal doors that I would like installed into 2 frames The doors are 820mm w X 2420mm h The frames are 1430 and 1470mm wide X 2240mm high The sides of the doors will need to be cut to fit Will need lock installed with short backset

I’m upgrading internal doors from silver to brushed brass hardware and am now looking to outsource the remainder of the work to someone experienced with door hardware and finish carpentry. Scope of work: • Finish installing hinges on approx. 4.5 internal doors (10 hinges total) • Existing mortises require minor easing/scraping only (≈1 mm or less) so the new solid brass hinges sit flush • Doors are staying on (no door removal required) • Install 4 internal door handles (new fixing holes required due to different handle layout) Progress to date: • I’ve already completed one door handle and one hinge, and the approach is confirmed — I’m now outsourcing the remaining work for speed and efficiency. Additional details: • All hardware already purchased (from HardwareBox) • Minor paint chipping has occurred and will be patched/repainted later — no painting required as part of this task • Looking for someone comfortable with hinge fitment, mortises, and door alignment Location: Bentleigh Timing: ASAP — today or tomorrow preferred, flexible on time Estimated duration: 1–2 hours for someone experienced Please only apply if you’ve done similar door/hinge work before.

We need someone to help us put two internal doors up and fit 3 door handles.

I need 3 internal doors taken down and replaced. New doors will need to be: • Cut down to size • Hinged • Hung • Door handles fitted Old doors removed and new ones installed in the same locations. Materials: Doors and handles provided.

Replace internal nonstandard door

Need to hang 1 x solid external door to replace back door and 1 x internal door to replace existing. both doors to be pre-primed so I can paint and add new deadlock and handles (I will supply). Door sizes: 2040 x 82 x 35. Doors might need to be trimmed to fit or adjusted. I haven’t sourced the doors so need you to source (any current stock at Bunnings or Bowens Hume Doors would suffice) and needs new hinges. Job can be done on weekends or any dates from 19th to 24th Dec as need it done before Xmas.

Need 4 doors rehung after carpet installation, may require the bottoms of the door to be shaved. Can be done afternoon or 9/12, afternoon of 10/12, morning of 11/12 or any time on 12/12.

Carpenter/handyman needed to fix damaged door frame and rehang internal door on the frame Must have: - 5 stars and high completion rate - great communication

I’m looking for someone experienced to install a cat door on an internal door in my home. I will provide the cat door, just need someone with the right tools and skills to cut the opening and installations or handyman work. Thanks!

Repair or replace internal door 2390x910x40 installed, if repairs are not possible.

We are replacing our internal doors. It is a single story house. So we will purchase the doors and handles - we then want someone to install the doors x 7. The door sizes are 6 standard (2040x 820) and 1 is 2040x920. The handles are standard.

We are wanting to either replace or repair 7 interior doors - this will depend on the advice you give once inspecting. Easy way to say it is they either don’t close or need some handles replaced. Looking for a reliable and experienced chippy to help. Price - ideally no more than $500 labour and we would pay for any door replacement and/or tap hardware.