Find an experienced handyman in Ryde

I am looking for someone to fix the tower rack before moving. The tower rack was accidentally broken on one side.

Remove and dispose the existing letterbox Install the new letterbox (as shown in the image), ensuring it is securely and neatly fitted. - You must have your own tools and materials - Clean up any debris or packaging after completion.

Leak in the ceiling only after persistent rain over a week or so. The leak is roughly in line with the exterior wall of the second floor. Refer to photos of the leaked ceiling and exterior wall of the second floor.

To install roller blinds. The old one is broken, need help to install the replacement plus a second rod of Ikea rail ready to be installed

Fix and paint my wall in Ryde I have the paint already

Its a large wall clock, mounting will be approximately 2 metres of the ground.

Hoping someone on here has the skills and tools to help me fix a pair of sunglasses- it’s nothing fancy, but has a bit of sentimental value as it was a gift and yes it’ll be cheaper to buy a new pair but I am really hoping someone can help! Friend accidentally sat on it and the metal part is slightly twisted and the screw has also come out. I’ve taken it into a few optometrist and no one would touch it as they don’t sell the brand (and said they won’t know where to get the spare part of it and don’t want to break it. Wondering if anyone on here knows how to straighten the metal part back and screw the broken part back on? I’ve taken photos of the damaged side and also the good side to show how it should look like.

My vertical blinds have disconnected from the thread that opens and closes them. I need the thread reconnected.

My door got busted while playing with my kid. We need to have it repaired/ fixed. Will provide/buy items required. Please provide me with your best offers as I am not able to estimate the cost of repairs

Repair the entry section of the net to the trampoline near the zipper.

A small truck patch rolled and hit the house. Gutter and pierced the plasterboard. Need it repaired like it never happened

Bathroom screen - just needs to be fixed somehow (silicon, rails etc) to the floor/wall.

Replace the old outdoor blinds shown in the pic with new ones. I've already bought the blinds, just need installation service. 6 blinds need replacing.

I have an internal black aluminium door that is slightly catching the ceiling in one of the top corners both horizontally and vertically which is preventing it from closing properly. Will need someone who has experience with aluminium doors. Also the height of the door is quite high - around 3m so please bring a ladder

There is a straight crack running horizontal to our outdoor wall (double brick and rendered) Hoping to get it cosmetically patched up as close to the same rendered wall colour and texture as possible. I do not have the paint so you will need to source that once onsite. It’s about 5m long in length.

Need fixing on Kitchen Cupboard

Scope of Work: Cut and fit gyprock to patch 6 ceiling holes (see photo attached) Tape, set, and apply joint compound (at least 2 coats) Sand flush and smooth for a flawless surface Final result should be invisible – no sign holes were ever there Job Requirements: Must bring own tools and materials Must have experience with ceiling patching and blending paintwork

I have two long wall shelves to install above my bed and need help to do this. It’s 190cm width so I need someone with experience to ensure this is sturdy and is drilled in solidly to the wall.

$100 Fee listed is a placeholder. Please read listing to completion. TASKS: Remove existing internal doors x 7 (6 x hollow core, 1 x wood+glass). Install new x 7 Solid Core (Corenthian HMR solid particleboard core) doors. 2040 x 820 x 35. Ensure smooth operation, alignment, no scrapping etc. Install door levers / handles. IMPORTANT NOTES: Doors jambs appear to be standard size 2040 x 820 however the odd door may need some minor trimming. It's an old house, not much is square, so i cant rule it out is all im saying. Existing door jambs are metal with 2 internal welded hinges (house built in 1979). See attached pictures. I am not sure if an additional hinge will be required to support the extra weight of these solid core doors. I propose to install with larger/stronger screws using existing 2 hinges first then assess if it seems OK. I think it will be. For example 10G 30mm. I have some Otter 10G x 30mm Satin Chrome Hinge Screws from Bunnings that can be used or if you have better recommendation please advise. The door jamb are very solid as all walls including internal are block/brick. As the door core is particleboard, you must ensure to always drill appropriate pilot holes first. Painting not required (will be done later). Disposal of old doors not required, although you are welcome to offer if nominal fee. I will supply: - The new doors - Door handles/levers - I can provide other items if advised in advance. - I can assist with lifting/holding doors on request. You will supply: All tools, experience, other items necessary to complete the task. Happy to list job for 1 door only and settle the rest via direct upfront agreement. Date and time is flexible but ideally within the next 7-10 days. Location West Pennant Hills 2125

The existing ceiling fan is making noise and also this fan provide a power to shower capsule radio clock. Please supply and replace the old fan. I will provide measurements tomorrow or you can visit, measure and install new fan . Ideal situation is like to like replacement without patching the ceiling of bathroom. Also, prefer fan model with minimal noise. Internal fan 25cm , outside 35cm wide