Find trusted awning repair experts in Melbourne

Tighten the fabric on an installed garden canopy. Approx 4 meters wide x 3 meters deep. Apply waterproofing.

1. Removed fixed awning from house 1 2. Remove fixed awning from house 2 3. Install house 2 fixed awning at house 1 4. Take the house 1 awaning away House 1 and House 2 are 40m away from each other in the same building complex Budget for the job is around $600

Need a new awning, new fabric

Need signage Installed (16ft by3 ft height) old metal awning 12-6AM My self and another friend can help with ladders and climbing up etc.

Need installation of outdoor awning. It comes with 3 brackets and installation manual. It’s heavy (so it needs 2 people) and the right anchors to the wall. It goes over an existing hot tub. Fixed price. Please see the installation manual here https://media.bunnings.com.au/api/public/content/6e4123c468584f32a6a01c64970122be?v=ca82c9f4&_gl=1*1q1ztps*_gcl_au*MTY1MDQ5ODI4LjE3ODk4NTM5MTg.*FPAU*Njc0MDcwNTg2LjE3ODgzODI0OTA.

Its a motor and remote operated Awning and extends full. It just needs to be realigned and adjusted to the correct position as one side is tilted downword and its low on full extension. Please quote for the job

I need a retractable awning for my 3.4m wide window on the first level of my townhouse.

Retractable awnings support rods have broken and need repairs New remote control is required Skylight awning needs to be replaced or repaired (it’s come off its tracks)or removed

Handyman or someone with experience with awning needed to realigned and adjust this to the correct position as one side is tilted downword and its low on full extension. Probably lifting one side and tighting the bolts can realign again... please quote the job.

The awning has been damaged and does not retract. It's controlled by a motor and remote. The task is to work out how to retract the awning without causing any more damage to it and leave it in the closed position.

See images. Take down old 'awning' (I'll get rid of it) and put up new one..(it comes with a motorised unit). I'll deal with the electrics separately. Separately, a few minor tasks: 1. put up a small, simple blind in the kitchen. 2. put up a bracket for a vacuum holder 3. put up an address plate front of house. This is the awning, more or less - https://www.bunnings.com.au/instahut-retractable-folding-arm-awning-motorised-sunshade-4-5mx3m-grey-white_p1161177

Take down awning fabric.

Looking for an experienced trade painter to repaint the exterior architectural trims, gables, and fascias of a single-storey weatherboard home in Thornbury (see attached photos). Scope of Work: Front Facade: Paint front gable trims/battens, window awning/hood, timber window frames/sills, and lower plinth baseboards in a heritage muted olive green (per mockup image). Rear Facade: Paint rear roofline fascias, gable cladding/trims, window/sliding door perimeter trims, and lower baseboards. Side Laneway/Path: Paint metal/timber fascias, gutters, downpipes (changing over from burgundy), and lower baseboards along the side pathway. Prep Work: Light sanding, cleaning down surfaces, scraping loose paint, and spot priming where required. Materials & Requirements: Paint (Supplied by Painter): Painter to supply premium exterior acrylic paint (e.g., Dulux Weathershield or Taubmans All Weather) tinted to agreed olive/green trim colour (e.g., / Olive Leaf). Equipment: Painter to supply all brushes, rollers, masking, drop sheets, and ladders/step platforms. Access: Flat, clear ground access at front, rear, and side brick pathway. Please state your experience with exterior timber and metal trim painting and include links/photos of past work when submitting your offer.

Hi! One of the locking pegs (mushroom pins) on my awning window frame has sheared off. Details: Hardware Brand: Kin Long window system (aluminum frame). The Issue: The pin snapped off, leaving the rivet/fastener base stuck in the track. What's Needed: Drill out/remove the broken fastener shaft and supply/install a replacement peg/pin to match the existing one (photos attached). Parts: I do NOT have replacement parts. Tasker must supply the replacement pin/screw/rivet. I have attached photos of the intact pin for reference, the broken base, and the overall window setup.

Need a PowerPoint installed from inside to outside of a building in an awning

Awning has come away from house on one side and needs new screw/affixing. Will need ladder to access as it is up high.

I have two windows with timber frames, approx 82cm x 47cm each that I would like to replace or repair with crank windows to get more air flow into the bathroom

We are having a full cassette awning installed at our property into an area with cladding. We have a temporary GPO within the cladding cavity which we need you to connect an external weatherproof black GPO on the cladding and potentially change the power wiring from the Awning unit to a black cable.

i have very old awning, the mechanism works but need to change the cloth. I dont have picture at the moment, but can provide if needed.

I have a van with an awning but it’s too small so I bought a bigger one to install. I want to then move the smaller awning to another van i have. Both have roof racks to attach to