Find an experienced flooring expert in Melbourne Western Suburbs

Help lay a floating floor in Werribee must have experience

Looking to hire an experienced flooring contractor in Point Cook to supply and install premium hybrid flooring with underlays across 4 bedrooms and a lounge room (~70–75 sqm). The job requires ripping up and disposing of all old carpet and waste materials, along with supplying and installing quality hybrid planks and matching trims/scotia. Please provide an itemised quote breaking down supply versus labour costs, along with details on the board specs (thickness, wear layer) and photos of past work. Flexible on the start date for the right trade.

160 sq m single story house I’ve got the floorboards brand new in boxes to be installed manly on top of ties.

I have 7mm hybrid waterproof flooring with 1.5mm underlay already attached and need it installed in a 3.2m x 3.2m room, including a small built-in closet area. I have attached a picture of the room which is old. The skirting boards are now installed, and I have purchased matching scotia for the edges. I will supply the flooring and scotia. I am looking for an experienced installer who can also supply the small amount of 200-micron builder's plastic/moisture barrier required for installation over the concrete slab. You must have experience installing hybrid flooring and provide all tools and equipment required to complete the job. Please confirm in your offer that the moisture barrier is included and provide your total installation cost.

Install hybrid flooring, 79 square meters. Prefer Arabic speaker. Located in Werribee.

I need to install the 10MM laminate flooring on top on yellow tonge boards. I have already got the flooring and the plastic sheet for the flooring. Just need to install. Total area is about 12sqm. Please quote install rate per Sqm.

Help with removal of old flooring. Clean up and moving stuff around.

Install hybrid flooring. 79 sqm. Hoppers Crossing. Prefer someone who speaks Arabic.

installation of hybrid flooring

3 rooms 4m x 4m Need supply and installation

Hi. I need installation (to be glued on wood sublfoor) of French Oak Parquetry, Versialle Panelsmy flooring. Small area to finish off the job.

I am looking for a quote for 6.5+mm hybrid vinyl planking to replace three carpeted rooms in my ground floor unit in West Footscray. There is a thin underlay below the carpet then concrete slab. Image included. The area is around 45m 2 I have included images of the current vinyl flooring in the hallway/kitchen/bathroom for reference as seeking a colour similar to the beige grey. I can help move the furniture out the way on the day of installation.

Need to cut and clear wooden floor in garage to install solar battery

Looking for an experienced flooring installer to replace the existing carpet with laminate flooring in a 4-bedroom house with one living room and an open-plan dining/kitchen area. All laminate flooring materials have already been purchased and are ready to be installed. The job will involve: * Removing the existing carpet and underlay * Disposing of all the old carpet * Preparing the floor for installation * Installing the supplied laminate flooring Labour and installation only — all flooring materials are already supplied.

Need hybrid floors laid for area of 17m2 please. Hallway and room

Have laminate floorboards that i would like for someone to install need them to be placed ontop of my kitchen tiles

remove cut boards and replace with extra boards into this space.

Remove carpet and install hybrid floor

Install deck in backyard

Supply and install of laminate flooring. Hope to beat the prices at bunnings for the supply. Need work on removing existing floor tiles. Need quote for both a) with removing existing tiles and b) not removing tiles. See photos attached, need work on the kitchen and living areas only, rooms have timber floors already, total approx 70sqm to cover. Thanks

Sanding and polishing timber floor

I have old floorboard that I would like to get sand and polish the area needed are 3 rooms and 1 hall. Measurement roughly It’s roughly Room 1: 3.8 × 3.7 m Room 2: 3.8 × 2.2 m Room 3: 3. 3.7 × 4.3 m Hall: 1mx11

Front walkway and entrance merbou deck, needs sanding back and polished

Sand existing timber flooring. •Polish and apply laminate/protective coating. •Blend new and existing flooring where possible 3 bed house plus study, kitchen, dinning and living room

Sand and Polish of timber boards. Please see photos approx 60 Sq/m of area. House is vacant at the moment so looking for works to be started and completed very soon. Location : Laverton

Sand and clear polish to floorboards as per floor plan attached. Total area highlighted in yellow requires sand and polish. Where I have added some blue lines is the area with wear and scratches the rest of the floor is in good condition. Floors are hardwood. House is empty of furniture and ready for the task.

We would like to get someone to give our floorboards a polish to hopefully remove scuff marks and give the floor a visual lift. Living and kitchen area approx 50m squared. I listed $10 for price just to list the job very mindful it will cost more Thanks

Could someone help fix our dining room timber floor- it’s not in good shape I need sanding and polishing plz

1st floor apartment in Williamstown with hardwood flooring. Has gaps and needs to be filled to reduce draft. Flooring needs to be sanded, polished and finished in a walnut colour. 2x bedroom, lounge room, small hallway and staircase

1 room 16 m2 room has already been sanded. Need to finish the job by resin polishing.

Need front and back deck sanded and polished

Need someone to sand and polish floorboards

Light buff of floors and polish in a 3 bedroom townhouse. Boards are floating floorboards and in good condition, they have faded in some areas from sunlight and we want to touch them up prior to sale. Location: Seaholme, VIC Objective: Restore flooring to near-new presentation suitable for sale campaign Buff & Recoat with water based matte polyurethane (good quality) Meals area is 3.3x4.1m, living area is 4.8x5

The space is 85sqm and currently has carpet flooring. We would like to achieve a look similar to this. It is located on the 3rd floor. Under the carpet is a concrete floor. Could you please provide an approximate cost?

POLISH TIMBER FLOORING - dining/living area. Job to be completed this week. Location Melton South

Need the complete downstairs floor sanded and re polished to the same colour there currently Need only the first two steps of the stairwell to be sanded back and re polished where there is pet damage Estimate the downstairs floor area to be around 35 square meters

sand and polish an existing timber floor in a two bedroom unit

Got approx 104 m2 floor to refinish with water based finish .

Posy house renovation, hardwood floor sanding and polishing

The timber floor need to be sanded and polished to the original color, it is not a big area to be sanded, however, we can think about common hall way to be sanded and polished.

Need someone to sand and refinish the floor.

Looking for an experienced floor sander to sand and refinish approx 70 m² of timber flooring (living + dining) in a two‑bed apartment in Melbourne. Goal: bring floors up to rental standard (durable, even finish, safe for tenants). Scope: - Sand the whole area (approx. 70 m²), including edges - Repair minor issues (nail pops, small gaps, replace/secure loose boards if needed) — please note major replacements will be quoted separately - Fill and prepare joints/holes, tidy jump/transition strips - Apply stain if requested (note any colour options) and 2 x coats of high‑traffic, water‑based polyurethane (or advise best durable finish for rental) - Clean up and remove dust; minimise dust (dust‑extraction preferred) - Leave site ready for tenants (no strong lingering odours) Location & access: Altona North, ground-floor apartment Timing: - Preferred start date: 5th July 2026 - Please include estimated days on site and drying times

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Seeking someone to buff/polish roughly 40 square metres of floorboards. (Wormy chestnut) Per the floor plan only the hallway and living area. Bedrooms and bathrooms are carpet or tile. Floors were fully sanded back 3 years ago with water based clear coat applied. Floors are in good condition with light scratch marks. I am not seeking perfection. Some marks may remain. But I won’t have a full re-sand done so soon as one was only done 3 years ago. I am seeking quotes. I will remove and replace my own furniture. Thanks