Find an experienced flooring expert in NSW

Remove and dispose off existing carpet and isntall new laminate timber floorig in 3 beds and 2 x stairs Appropriate 75 sq.m Supply and install

Remove current carpet and install laminated floor. One bedroom only, room size 9 sqm

I need 20m2 of laminate flooring to be cut and installed. Underneath will be underlay and scotia installed at end. It is for a studio apartment.

About 50m2 of carpet flooring needs removal, disposal and replacement with hybrid flooring. Hybrid flooring is already available onsite. Skirting throughout. Please come to inspect before providing a quote. Need this flooring job done by 9 May.

Approx 45-50sqm job I will supply the underlay and flooring Clix 524 laminate and skirting 3mm underlay with moisture barrier Looking for install inside the office and directly beneath it

Install 17m2 of floating straight plank boards + 4m2 of glued-down herringbone in the middle of the room as per the markup. Herringbone to be bordered by plank boards + architectural metal trim. All materials provided, tools to be provided by installer. 14mm boards laid directly on the existing perfectly leveled

Installation of hybrid floor board for the kitchen and corridor. The materials will be provided. BYO tools to cut.

We need a laminate installer for one job in queanbeyan. 50sqm All the materials will be provided.

i would like to install decking for my backyard … 6x3.5

Timber lining panel installation required 3 x walls 2.8 x 2.8 meter approx 1 x wall 2.8 x 6 meter approx I can supply timber panels you will cut to measure and install in Granville

I’m converting a small storage room into a study nook and need floorboards installed to cover an exposed concrete subfloor where built-in cabinets were recently removed. The job involves three tasks: 1. Lay Floorboards ∙ Install supplied (matching) floating floorboards to match the existing light timber flooring in the adjoining area ∙ Boards need to butt up neatly to the existing flooring at the threshold ∙ The subfloor is bare concrete with some old adhesive residue from removed cabinetry – light prep/levelling will be needed before laying ∙ Please bring underlay – I don’t have any on hand 2. Install Skirting Boards ∙ Install supplied skirting boards around the perimeter of the are as shown in the photos to finish the floor edges clean 3. Patch Holes in the Wall ∙ There are a few holes and damage spots in the walls left over from the cabinet removal ∙ Please patch and prep the walls ready for painting – I will do the painting myself, so just needs to be sanded smooth and ready to go. I will supply the filler for the wall patching. This is a relatively small task for someone that knows what they are doing.

Hi, I renovated 15 yeas ago. Having carpet layed in my bedrooms. At the time the floor boards very soft in areas and the builder laid some type of tin product over parts on the floor …. I didn’t need new boards in the bedrooms. Now… I can feel a floor board is broken in another area. Hoping the carpet can be lifted and the area fixed.

Details: • Install 6.5mm hybrid flooring in a single room • Room size: 6 sqm • Floor is flat and ready • Hybrid flooring will be provided

Need a floorer to install hybrid timber flooring in a unit. About 70sqm. Levelling will be done and timber is supplied. Just need labour to help install. Needs to be done on Thursday 22nd January in South Wentworthville. Early morning start.

Need someone to lay Self Adhesive Vinyl Planks, the room size is 3.5m x 2.5m. Need someone that's done it before and knows what their doing please

Install 19m2 of vinyl tiles - tiles are approx 1200mm x 200mm. Install is on concrete floor. Concrete was laid 6 months ago. Concrete has been sealed and is ready to lay on. Cutting is very limited due to dimensions of space. Adhesive supplied based on what is required.

We will be installing a kitchen in an apartment in Cammeray within the next few weeks and would like to lay new flooring. Current flooring is tiles. Please quote for two options 1. Remove tiles and prep floor to lay new hybrid flooring 2. Lay hybrid flooring on top of the tiles. Please also quote labour only. The floor in the picture is almost the entire kitchen that would need sorting.

Replace damaged timber floors, approx 2m2. I have the material, just need a professional with tools to replace.

I’d like new Lino floors laid in our staff room Floor is concrete and needs to be cleaned Room is approx 4x6 Other odd jobs available as well if you’re up for it

Job relisted as previous one expired Lay vinyl planks flooring ,approx 70 sq Labor only. Needing it completed ASAP.

need someone with experience to fix a customer floor at stanmore house ,you need to sand and vanish the floor .please make sure you have experience thank you harrison

Need to polish wooden floor for 3 rooms

Timber floor area of living and kitchen up to less 30 sqm. Need floor sanding and polishing

Hardwood floors need a professional clean and satin/matte floor polish. 3 bedrooms, lounge and dining area. Small house. No furniture to move as I have just bought the house.

The kitchen and entryway of my new apartment has parquetry flooring which I would I think I would like sanding and polishing. There is some discolouration where the fridge must have been which I think is water damage although unsure if it can sanded out. Otherwise there is just general wear and tear.

TITLE: Floor sanding, staining & polishing — residential home Note - work won’t commence until July We're looking for an experienced floor sanding and polishing professional to sand back, stain and finish the timber floorboards throughout our home. The existing floorboards are currently a light/natural timber colour and we need them taken back and restained to a significantly darker tone to match new flooring recently installed in other areas of the house. WHAT WE NEED DONE: • Full sanding of existing floorboards (multiple passes to remove old finish and open up the grain) • Application of a dark stain to match our existing new flooring — we're happy to provide a sample or photo for colour matching • Application of a quality oil-based finish (e.g. Loba, Bona, or Rubio Monocoat) for durability and a rich, deep look • Edge sanding and corners • Clean-up of all dust and debris on completion ABOUT THE SPACE: • Approx 100 m² across multiple rooms — including 3 bedrooms, office, living, dining and hallways • Wet areas (bathrooms, laundry, kitchen) are excluded — timber floors only • Standard single-storey home — easy access • Timber species unknown — tradie welcome to assess on inspection Please provide a quote that includes all materials (stain + finish coats). We'd love to see examples of dark stain work you've done previously. Prefer a fully licensed tradesperson with public liability insurance.

Hi, we've recently purchased a property in Maroubra and are looking to have the timber floors sanded and polished as soon as we get the keys. We don't have access just yet, but can share the floor plan and listing photos. The sandable area is roughly 50-60m2 (living, kitchen, hallway, and 2 bedrooms). Obviously a quote is hard over the phone so we are trying to organise to get someone in to have a look before settlement if possible Thanks

3 bed each approx 5x5 1 living 6x7 & hallway 11 x 2 removal disposal of carpets polish underlying floorboards lay new floorboards in 4 x 2 room

I have 3 bedrooms and a hallway that need the hardwood timber flooring sanded, sealed and polished.

Timber flooring sand and polished asap

Deck cleaning and double quoting of backyard deck. We will supply the cleaning and deck quote and supplies.

2 bedroom apartment with hybrid laminate flooring in need of a polish and scratch removal throughout

Taking up existing carpets prepping the underlying floorboards sanding coating polishing it’s a small home 3 x beds 1 x hallway 1 x living - lay floorboards on a cement floor 4 x 2

Small office in Sydney CBD with four meeting rooms and an open area. Task is to clean and polish aluminium skirting boards around the office. Steps: • Clean metal skirting • Remove marks or residue • Polish, wax and buff Products will be supplied. Needs to be completed before 5pm Sunday. Easy access office building with lift.

Need sand & polish for timber floors for 5 bedrooms.

I have recently vacated a rental property in Lane Cove. There has been some damage to an engineered timber floor caused by a rolling desk chair - I have attached photos. The property manager has confirmed that the owner does not want to treat the whole floor - I just need a quote to repair this patch and tie in as best as possible with the remainder of the room. Thanks!

I have a small kitchen area of flooring on my boat, it’s at stg marina and very easy access,I need it to be sanded stained (teak colour) and polished See pic approx 2.5 x 2.1

I would like to request a free quote for sanding and refinishing solid hardwood floors across two levels. The total area is approximately 185 square meters, and I prefer a water-based polyurethane finish

I need two bedroom floors sanded back and re polished. Trying to weigh up if it’s worth doing that or getting carpet over the top. Both Bedrooms are 3.3 x 2.7 in size

Looking for someone to remove lino and sand/polish floorboards.

Sand and refinish timber floor in small room (~9m²). Looking for experienced floor sanding professional (not handyman). Want a light Scandinavian/blonde finish with matte seal—no yellow/orange tones. Please include materials and 2–3 coats. Must provide photos of similar work. Prefer test patch before full job.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Two adjoining rooms have hardwood floors. We have taken up the carpet and tiles that were covering it and we now want to bring the floors up to the same as the rest of the house. Please quote for one square meter on AirTasker and then we can come to an agreement on the final amount (approx 30 sm) First picture shows the floors in the rest of the house. Second and third pictures are the floors that need to be finished.

Recently removed carpet from hardwood floor which needs to be refinished. Two bedrooms (10.5 sqm each) plus hallway (~3 sqm). Will add photos shortly!

We have moved into a 60 year old single level house and want to remove the carpet in the lounge room, dining room, kitchen and hallway and get the original floorboards sanded and polished. There are also an extension that was completed that only has partial board underneath and we would need to add floorboards on top.

Kitchen area 5.5m × 2.5m & small pantry 1.4m x 1.7m

3 bedroom home cypris pine floor to be sanded and refinished. Either 70m2 or 35m2 depending on cost. I might carpet the bedrooms. Thank you.

I need my hardwood floor refinished. Existing floors top polished surfaces are wron out in some areas. Floor needs removal of old finish, and a new top coat. Total area 50sq. m 3x bed rooms 1x living room 1x hallway Please quote a price.

Job Description: I am looking for an experienced flooring professional to refinish my existing wooden floorboards. The boards are already exposed and ready for restoration. The job involves sanding, minor repairs, and applying a finish to give the floor a polished and professional look.

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

I would like the kitchen floor boards to be refinished, the floorboards in the rest of the unit are in good condition - Due date: Before Saturday, 28 January 2023

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022

Aged and damaged flooring needs refinishing, 90m2 - Due date: Flexible

Hi, we require installation of engineered floorboards (supply not required) in a large bedroom and staircase. Unsure of exact measurements, around 40m2. Would require removing skirting boards and existing carpet and refitting skirts. A second job is for sanding and painting these floorboards, and also sanding and painting exisiting engineered flooring in living/kitchen area (around 28m2). Thank you! - Due date: Flexible