Find an experienced flooring expert in NSW

I am looking at getting a quote to put floating floorboards throughout my house. I would like someone to come and discuss what is required and provide a quote

Cutting and laying vinyl on floor (over existing hard carpet - about 70m2. We provide the vinyl)

Need to installing around 65 square meters either hybrid or Vinyl flooring in Nov, need to remove the carpet as well.

Around 35m² carpet install and remove old

Looking for a quote to install engineered timber flooring to about 70 sqm of carpet area

Supplying and installing floating floor boards in office - approximately 50 square metres

Supply & lay 23-24m2 laminate flooring in my downstairs lounge area ( not cheap hybrid), laminate must be water resistant. Lift all skirts & reinstall. Existing floor is tile & is flat. Will need a few LM edging / scotia to bit up against walls. Professional floor layers only. $ preferred , reach out below IG:cal_kel1991

Small part of overall large room (approx 2 by 2) had tiles which have been pulled up. Need floor grinding and levelling, wood laying, skirting added.

Need a 7m x 20m space in a warehouse carpeted. Have the underlay and two 3.5x20m carpet rolls ready to go.

Hello. I need to get carpet removed Install hard wood floors for brand new apartment 1x study room around 6m 1x bedroom around 11m 18 sqm total

Looking for a flooring handyman to complete a small unfinished hybrid flooring job. -Only 1.5 planks left to install. -Need approx. 6m of caulking between the flooring and trim. Job is urgent, ideally done tomorrow or Friday. Budget: $200

We just had new floor installed. We now need skirting boards installed. Approximately 55m linear. See pics for skirting board.

I need assistance with laying down ram board to protect timber floors. This will be an hourly rate of $50 per hour I imagine will take 2-3 hours. Thursday evening or early Friday morning. I will provide the board and masking tape.

2.9m x 5.5m flooring - timber hybrid Installation/ underlay.

Looking for someone experienced to remove carpets and install timber flooring in two rooms (as shown in the attached floor plan bedroom 2 & 3)to match with the shade that I already have around the house, it doesn’t have to be exact shade but something similar. Details: • Location:Blacktown • Rooms: 2 bedrooms • Job includes: Removing existing carpet and installing timber/laminate flooring (please provide quote with supply) Note: I have a council cleanup booked, so carpet disposal is not required. Thanks! ☺️

Simple job , stick on vinyl flooring in a new cabin to laid. Also if up for them task there will be corking also but paid separately.

Need timber skirting installed 4 bedroom lounge kitchen

Install 35-40sqm of click-lock hybrid flooring into 1 open plan room

Lay 300 square metres of Blackbutt Flooring 85x19 over timber battens in new home. Flooring is the be glued and secret nailed for fixing, retired floorer with labourer would be suitable or qualified tradesman with floor laying experience. I have the timber, you need to lay the timber and supply labour, nails, fixing tools, glue and anything else needed to fix the flooring down. Budget is per hour $80.00 for tradesman, Labourer is $40.00 per hour. Up to 3 weeks work for 2 people

The location is the Regina building, 322 Victoria St, Darlinghurst, studio is vacant and a study nook area between the kitchen and bathroom requires floor preparation and installing of vinyl flooring. Space is about 1.5M wide x 2.4M deep with tiles now removed for then levelling, preparing and vinyl tiles (or sheeting) in a natural or rustic wood style preferably.

50m2 aparment, 2 bed, living and kitchen. Carpet will already be removed. Floor leveler will need to be grind down and then polished

Sand and polish timber floor(28sqm), plus 13 stairs(no landing and I will remove all carpets)

Sand bamboo floor flat and smooth remove traces of sealer and polish apply 2 coats satin waterbase - 3 if needed. Its one room and corridor as per photos. Total room 57.5m2.

Floor board / deck scrubbing/ wax / buff / polish

Need sanding and polish work on my wooden floor

Timber floor need light sanding (not heavy SANDING) and then apply vanish for final polish. A total of 60 sqm

Sand and polish 125 sqm of internal pine floor boards. Some filling required. Food and accommodation provided if needed

I need to get a room sanded and stained/polished. The room size is 5.5 x 6 meters - . I also need our deck to be done; it's approximately 5 x 2 meters, sanded, and stained.

I have a small 3 bedroom house that I need the timber floors sanded and polished aprox 65m2

Two bedrooms, lounge and hallway to be sanded and polished. Has been covered by carpet for decades. 50sqm all up - 13, 12, 16, 9

Floor polishing epoxy timber

I want to polish the timber floor all 3 rooms plus living room

Looking at someone to come and repolish the wooden floor in our hotel lobby. Looking at removing some floor marks and make the wood shiny again with a good professional clean.

Sand and polish floorboards of this one room. Preferably this week in the afternoon on either Tuesday 16th, Wednesday 17th, Thursday 18th or Friday 19th.

I need floorboards prepped and sanded ready to be polished in small dining room, lounge room and small hallway. Will supply floor board putty. But you will need to have your own tools for the sanding process. Can supply photos and measurements.

I would like to get my engineering timber floor sand and polish, to make it look nice and clean.

We need cracks repaired in our polished concrete terrazzo to blend in with surrounding in living area.

Need a outdoor concrete floor polished and a coating put on it

Snad and polish a small bedroom 3.3m x 3.7m

I need help to timber floor sanding and polishing on groud floor townhouse in Turramurra - Area around ~50 sqm (see picture for floor plan) , job can start ASAP

Two adjoining rooms have hardwood floors. We have taken up the carpet and tiles that were covering it and we now want to bring the floors up to the same as the rest of the house. Please quote for one square meter on AirTasker and then we can come to an agreement on the final amount (approx 30 sm) First picture shows the floors in the rest of the house. Second and third pictures are the floors that need to be finished.

Recently removed carpet from hardwood floor which needs to be refinished. Two bedrooms (10.5 sqm each) plus hallway (~3 sqm). Will add photos shortly!

We have moved into a 60 year old single level house and want to remove the carpet in the lounge room, dining room, kitchen and hallway and get the original floorboards sanded and polished. There are also an extension that was completed that only has partial board underneath and we would need to add floorboards on top.

Kitchen area 5.5m × 2.5m & small pantry 1.4m x 1.7m

3 bedroom home cypris pine floor to be sanded and refinished. Either 70m2 or 35m2 depending on cost. I might carpet the bedrooms. Thank you.

I need my hardwood floor refinished. Existing floors top polished surfaces are wron out in some areas. Floor needs removal of old finish, and a new top coat. Total area 50sq. m 3x bed rooms 1x living room 1x hallway Please quote a price.

Job Description: I am looking for an experienced flooring professional to refinish my existing wooden floorboards. The boards are already exposed and ready for restoration. The job involves sanding, minor repairs, and applying a finish to give the floor a polished and professional look.

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

I would like the kitchen floor boards to be refinished, the floorboards in the rest of the unit are in good condition - Due date: Before Saturday, 28 January 2023

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022

Aged and damaged flooring needs refinishing, 90m2 - Due date: Flexible

Hi, we require installation of engineered floorboards (supply not required) in a large bedroom and staircase. Unsure of exact measurements, around 40m2. Would require removing skirting boards and existing carpet and refitting skirts. A second job is for sanding and painting these floorboards, and also sanding and painting exisiting engineered flooring in living/kitchen area (around 28m2). Thank you! - Due date: Flexible