Find an experienced flooring expert in NSW

Need an experienced floorer to cut and install laminate floating floorboards, skirting boards, and a door cover strip in one room. Room size: 3600 x 2680mm (~9.6 sqm) What’s included: All materials already purchased and on-site including laminate panels, skirting, and door cover strip. Underlay is already laid. No foam layer required. Scope of work: ∙ Cut and install laminate floating floor panels ∙ Install skirting boards ∙ Install door cover strip (1 door — bottom of door will need a slight trim to allow clearance) Bonus: Approx 200kg of mixed scrap timber (old floorboards, laminate, timber planks) is yours to take if you want it. Easy driveway access for loading. Otherwise just needs to be removed from site. You’ll need to bring: Your own tools: circular/drop saw, jigsaw, mallet, spacers, pull bar, tape measure, etc. Timing: Flexible. Happy to work around your availability.​​​​​​​​​​​​​​​​

Helping to lay floating floorboards

Hi there, I’m looking for an experienced handy person or flooring installer to complete a laminate flooring job in my kitchen, dining room, lounge room and hall area approximately 70 sq metres in Katoomba NSW. Scope of works: Prepare subfloor (clean and level check) Move furniture as required to lay laminate (I can help with this) Install underlay (supplied) Install laminate flooring (approx. 70m², supplied) Install transition strips at doorways (e.g. laminate to carpet where applicable) Install scotia/trim to finish edges Areas: Kitchen Dining Lounge Small hallway Materials: Laminate flooring supplied (lightly used, only down for ~3 months, in good condition), 5G click lock system. Mostly lightly used but there are 2 boxes of brand new laminate. Underlay will be supplied. Scotia and transition strips - can be supplied by me, or purchased by you and I will reimburse costs. Important notes: Looking for someone with experience installing floating/click-lock laminate flooring, particularly reused materials Must be familiar with correct expansion gaps, staggered laying, and doorway transitions Own tools and equipment required I understand that re-using laminate means results will not be what would expect with brand new laminate - I just want neat, well laid floors. Timing: I'd like the job completed over the easter long weekend if possible.

Looking for an experienced decking installer to supply labour only for a small outdoor patio in Bellevue Hill. • Area: ~30sqm composite decking • Materials: Already sourced (white composite decking boards) • Scope: • Build subframe (likely on existing pebblecrete surface) • Install decking boards (including cuts around angles) • Advise on and install appropriate fixing system (clips etc.) • Clean, professional finish with neat edges (picture frame preferred) Site details: • Ground floor patio • Easy access • Irregular shape (refer to plan – not a simple rectangle) Requirements: • Prior experience with composite decking (WPC) • Own tools • Ability to advise on subframe design and spacing • Attention to detail – this is a visible entertaining area Timing: • Flexible, but ideally within the next 1–2 weeks Optional (please specify): • Supply of subframe materials (timber/aluminium) • Supply of clips/fasteners Please include: • Photos of previous decking work • Rough estimate or day rate • Availability Happy to be reasonable with pricing. Please provide your quote.

Hi, I’m looking for an experienced installer to lay floating laminate floorboards in a studio space in Surry Hills. Scope: 2 rooms: approx 75sqm + 70sqm (145sqm total) Installing floating laminate flooring Subfloor is yellow tongue Both spaces are open and relatively straightforward Flooring: Floorboards will be supplied (likely 12mm laminate) Installation will be over yellow tongue. Please include in your quote: Installation only cost with scotia and without (per sqm or total) Estimated timeframe to complete Experience with laminate / floating floor installs Please note: I’m comparing a few quotes and looking for a fair, competitive rate for a straightforward install. Please include: Whether you are insured Any workmanship warranty offered

Remove carpet and install laminate flooring Looking for an experienced flooring installer to remove existing carpet and replace it with light oak laminate flooring. Room size is approximately 440cm x 276cm. There is concrete underneath the carpet. Scope of work: • Remove existing carpet • Prepare concrete subfloor if required • Supply and install laminate flooring (light oak finish) • Supply and install underlay • Install trims/skirting adjustments if required • Full clean up after completion Materials: To be supplied by installer (please include in your quote) Timing: Flexible, looking to get this done soon Notes: • Please include total price (labour + materials) • Experience with laminate flooring required

Hi, I’m looking for a professional to install hybrid flooring in my sunroom. Details: - Area: 1.6m x 6.7m (~10.7㎡) - Existing floor: tiled - Proposed build-up: >Timber battens fixed over tiles >20mm plywood subfloor >8mm hybrid herringbone flooring - Target finished floor height: 90–95mm - Please advise on the best fixing method over tiles, considering the risk of cracking. I was thinking of using construction adhesive (e.g., Liquid Nails) combined with mechanical fixing, but I’m open to your recommendation. Request: - Supply and install cost - Recommended batten spacing and fixing method - Total finished floor height - Timeline for the job Please advise if a site inspection is required

Hi, I’m looking for someone experienced to replace carpet with timber-look flooring in a small hallway (approx. 7m²). Scope of work: • Remove and dispose of existing carpet • Prepare subfloor (ensure level and clean) • Supply and install hybrid / laminate flooring (open to suggestions) • Install underlay if required • Install skirting or scotia for clean finish • Ensure neat transitions to adjacent rooms Site details: • Small hallway (~7m²) • Easy access • Located in Ku-ring-gai area Requirements: • Experience in flooring installation • Good attention to detail (clean edges & finish) • Must include waste removal Please include: • Quote (labour + materials OR labour only) • Flooring type you recommend (hybrid / laminate) • Estimated timeframe • Photos of previous similar jobs

Timber lining panel installation required 3 x walls 2.8 x 2.8 meter approx 1 x wall 2.8 x 6 meter approx I can supply timber panels you will cut to measure and install in Granville

I’m converting a small storage room into a study nook and need floorboards installed to cover an exposed concrete subfloor where built-in cabinets were recently removed. The job involves three tasks: 1. Lay Floorboards ∙ Install supplied (matching) floating floorboards to match the existing light timber flooring in the adjoining area ∙ Boards need to butt up neatly to the existing flooring at the threshold ∙ The subfloor is bare concrete with some old adhesive residue from removed cabinetry – light prep/levelling will be needed before laying ∙ Please bring underlay – I don’t have any on hand 2. Install Skirting Boards ∙ Install supplied skirting boards around the perimeter of the are as shown in the photos to finish the floor edges clean 3. Patch Holes in the Wall ∙ There are a few holes and damage spots in the walls left over from the cabinet removal ∙ Please patch and prep the walls ready for painting – I will do the painting myself, so just needs to be sanded smooth and ready to go. I will supply the filler for the wall patching. This is a relatively small task for someone that knows what they are doing.

Hi, I renovated 15 yeas ago. Having carpet layed in my bedrooms. At the time the floor boards very soft in areas and the builder laid some type of tin product over parts on the floor …. I didn’t need new boards in the bedrooms. Now… I can feel a floor board is broken in another area. Hoping the carpet can be lifted and the area fixed.

Details: • Install 6.5mm hybrid flooring in a single room • Room size: 6 sqm • Floor is flat and ready • Hybrid flooring will be provided

Need a floorer to install hybrid timber flooring in a unit. About 70sqm. Levelling will be done and timber is supplied. Just need labour to help install. Needs to be done on Thursday 22nd January in South Wentworthville. Early morning start.

Need someone to lay Self Adhesive Vinyl Planks, the room size is 3.5m x 2.5m. Need someone that's done it before and knows what their doing please

Install 19m2 of vinyl tiles - tiles are approx 1200mm x 200mm. Install is on concrete floor. Concrete was laid 6 months ago. Concrete has been sealed and is ready to lay on. Cutting is very limited due to dimensions of space. Adhesive supplied based on what is required.

We will be installing a kitchen in an apartment in Cammeray within the next few weeks and would like to lay new flooring. Current flooring is tiles. Please quote for two options 1. Remove tiles and prep floor to lay new hybrid flooring 2. Lay hybrid flooring on top of the tiles. Please also quote labour only. The floor in the picture is almost the entire kitchen that would need sorting.

Replace damaged timber floors, approx 2m2. I have the material, just need a professional with tools to replace.

I’d like new Lino floors laid in our staff room Floor is concrete and needs to be cleaned Room is approx 4x6 Other odd jobs available as well if you’re up for it

Job relisted as previous one expired Lay vinyl planks flooring ,approx 70 sq Labor only. Needing it completed ASAP.

-Check what type of flooring is currently in my apartment and check if it is stuck down or floating and advise if floor prep will be required for new flooring. -Provide a quote to rip out existing flooring -Provide a quote to install new herringbone and/or regular wooden flooring -Provide quote for scotia and acoustic underlay. -Provide quote for disposal of old flooring

Timber flooring sand and polished asap

Sand and re-polish existing engineered timber floors in a Banksia apartment. Floor boards currently have wear / scratches. Scope: -45.5 sqm engineered timber — entry, living, dining, 2 bedrooms -Full sand and polish, 3 coats (sealer + 2 top coats) -Water-based polyurethane finish (satin or matte) Currently a rental apartment but will be vacated and available for the works to take place after 5 April 2026.

Deck cleaning and double quoting of backyard deck. We will supply the cleaning and deck quote and supplies.

2 bedroom apartment with hybrid laminate flooring in need of a polish and scratch removal throughout

Taking up existing carpets prepping the underlying floorboards sanding coating polishing it’s a small home 3 x beds 1 x hallway 1 x living - lay floorboards on a cement floor 4 x 2

Small office in Sydney CBD with four meeting rooms and an open area. Task is to clean and polish aluminium skirting boards around the office. Steps: • Clean metal skirting • Remove marks or residue • Polish, wax and buff Products will be supplied. Needs to be completed before 5pm Sunday. Easy access office building with lift.

Need sand & polish for timber floors for 5 bedrooms.

I have recently vacated a rental property in Lane Cove. There has been some damage to an engineered timber floor caused by a rolling desk chair - I have attached photos. The property manager has confirmed that the owner does not want to treat the whole floor - I just need a quote to repair this patch and tie in as best as possible with the remainder of the room. Thanks!

I have a small kitchen area of flooring on my boat, it’s at stg marina and very easy access,I need it to be sanded stained (teak colour) and polished See pic approx 2.5 x 2.1

I would like to request a free quote for sanding and refinishing solid hardwood floors across two levels. The total area is approximately 185 square meters, and I prefer a water-based polyurethane finish

I need two bedroom floors sanded back and re polished. Trying to weigh up if it’s worth doing that or getting carpet over the top. Both Bedrooms are 3.3 x 2.7 in size

Floor sanding and polishing to a natural matte finish: -65m2 -Can be present at site on 26, 27 Feb to provide inspection -Old carpet strips will be removed. May need to remove some old staples from previous carpet. -Broken floor boards will be replaced by others. -You can start earlier to prep (while painting is being completed). Need to move-in on 7th March Please send through previous work photos.

Bedroom is empty , just need a light sand and polish to bring it back to life

Sand & polish old wooden floor of lounge room approx 25sqm

There are some fine scratches on my timber floor that need to be buffed out. I have tried bees wax but can’t get them out. There are three scratches, about 3 metres in total. They are very fine, like a hair scratch. You can only see them in the pics, because you can see where I have tried to correct with bees wax

Timber deck minor fixing and polishing

Sand and polish polyethylene

Two rooms plus a hallway. Sanding back very orange floorboards plus polish - preferably matte. Rooms are different timbers so I know they won't look the same. Some help to move furniture also required.

Wanting to get my kitchen benchtop polished and resealed

Looking for someone to remove lino and sand/polish floorboards.

I’m after a free quote to sand and refinish solid hardwood floors across two levels (about 190 m²). I prefer a water‑based finish. The lower level (kitchen/dining) has worn high‑traffic areas; upstairs is mostly fine, so I may only do the lower level depending on the quote. House is empty except for a few small furniture items that can be moved. Please include in your quote: - Scope: screen & recoat vs full sand per level - All materials and labour (including brand/type of finish and number of coats) - timeline (days) - Cost for any board repairs or skirting removal (if needed) - Warranty and earliest availability Sample pictures of the high traffic areas are attached. Location: Bexley North.

Sand and refinish timber floor in small room (~9m²). Looking for experienced floor sanding professional (not handyman). Want a light Scandinavian/blonde finish with matte seal—no yellow/orange tones. Please include materials and 2–3 coats. Must provide photos of similar work. Prefer test patch before full job.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Two adjoining rooms have hardwood floors. We have taken up the carpet and tiles that were covering it and we now want to bring the floors up to the same as the rest of the house. Please quote for one square meter on AirTasker and then we can come to an agreement on the final amount (approx 30 sm) First picture shows the floors in the rest of the house. Second and third pictures are the floors that need to be finished.

Recently removed carpet from hardwood floor which needs to be refinished. Two bedrooms (10.5 sqm each) plus hallway (~3 sqm). Will add photos shortly!

We have moved into a 60 year old single level house and want to remove the carpet in the lounge room, dining room, kitchen and hallway and get the original floorboards sanded and polished. There are also an extension that was completed that only has partial board underneath and we would need to add floorboards on top.

Kitchen area 5.5m × 2.5m & small pantry 1.4m x 1.7m

3 bedroom home cypris pine floor to be sanded and refinished. Either 70m2 or 35m2 depending on cost. I might carpet the bedrooms. Thank you.

I need my hardwood floor refinished. Existing floors top polished surfaces are wron out in some areas. Floor needs removal of old finish, and a new top coat. Total area 50sq. m 3x bed rooms 1x living room 1x hallway Please quote a price.

Job Description: I am looking for an experienced flooring professional to refinish my existing wooden floorboards. The boards are already exposed and ready for restoration. The job involves sanding, minor repairs, and applying a finish to give the floor a polished and professional look.

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

I would like the kitchen floor boards to be refinished, the floorboards in the rest of the unit are in good condition - Due date: Before Saturday, 28 January 2023

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022

Aged and damaged flooring needs refinishing, 90m2 - Due date: Flexible

Hi, we require installation of engineered floorboards (supply not required) in a large bedroom and staircase. Unsure of exact measurements, around 40m2. Would require removing skirting boards and existing carpet and refitting skirts. A second job is for sanding and painting these floorboards, and also sanding and painting exisiting engineered flooring in living/kitchen area (around 28m2). Thank you! - Due date: Flexible