Find an experienced flooring expert in West Melbourne

Install Hybrid flooring in my livibg area. I will be sourcing the material shortly. Approx area 82m2

Need to remove the carpet and install hybrid flooring in master bedroom Area is approx 21.6m sq

I need vinyl installed on my garage floor - vinyl provided

I need someone to lay some receycled treated pine decking, then use filler to fill the old nail holes. I will then sand and paint after that's been completed. The above also includes: - replace 1 weatherboard (material provided) - Measure and cut a piece of timber against the decking. (material provided) I have a: - Hammer - Nails - Circular hand saw - Electric sander - Electric planer - Saw horse

Grey hybrid flooring needed —-> All rooms except bedrooms, staircase, bathrooms Grey Carpet replacement needed —-> all bedrooms and taken out of rumpus. Floorplan attached. Desired Colour and style of flooring & carpet attached.

I’m after installation of hybrid flooring and quads over tiles for entire house except 2 bathrooms and garage. Please see attached photos for plans (not the best drawings). Please quote for labour only

I have floor boards and scorcher. Layer to provide underlay and the metal edges for carpet edges but will pay or let me know where to purchase from. Area is middle stair landing : 1.8m x 1.2m

Scope of work: Remove and dispose of existing carpet in 2 bedrooms and 1 study Supply and install hybrid flooring (open to recommendations on brand/quality) Install all required trims/scotia and transition strips where needed Areas: Bedroom 1: approx. 2.5m x 3.5m Bedroom 2: approx. 2.5m x 3.5m Study: approx. 2.7m x 2.5m Total area: approx. 25–27m²

Material on site, need flooring fixed around the ensuite

I am building a deck for my backyard. I have assembled the base frame for the project and each of the 16 sections have adjustable feet. The total size is around 4.5m x 4.5m. I need an experienced Airtasker to help: - levelling the ground - levelling the frame now sitting on level ground - cutting Brite HD Urban X boards to size - creating a picture frame feature around the edge of the decking - finishing off the end boards that will hide the frame when viewed from the side The image shows half the frame in position laid out without being joined together yet.

2 rooms need to remove the carpet and install new flooring. Have few boxes of Bamboo flooring left at the garage can use and install. If doesn’t work and need new materials we can arrange. Looking for someone that can do the labour job, someone that knows how to do it. Give offer as i needed approval from my landlord. Thanks

Install a 3x4 decking with fencing and gate in outdoor living area

3 bedroom need old carpet removed and new flooring installed with new underlay. New flooring need supply and install. Carpet or laminate flooring. Send your quotes

We have 3 handrails that need to be assembled and installed on our front decking steps. 2 x 5-6 steps 1× 2-3 steps See photo attached for example. I have also attached photos of the decking steps.

I have materials eg flooring. Will just need concrete slap prepped high/low spots for laminate to be laid

I am installing 85sqm of 6.5mm hybrid flooring today (Sunday Feb 22). Im looking for someone experienced to give me a hand. Begin asap and work until the job is complete (approx 5pm)

Need someone to install herringbone flooring in Rockbank Approx 103 sqm2 Please let me know how much you charge per sqm2 Need experience and photos of previous work

I need my decking to be re-installed, existing stumps still ok. Type of deck to be reinstalled is Eckodeck. Deck measurements: 6.015m x 4.065m Task required: Remove and dispose existing deck Supply material Reinstall new deck Budget: approximately $5000

I need someone to supply all materials and fully install laminate flooring, replacing existing carpet. Scope of work - Remove and dispose of existing carpet and underlay - Supply underlay, trims and all fixings - Install laminate flooring (I will provide, it is "Spillguard Cabana Water Resistant Laminate Planks" from Bunnings ) - Install skirting as required - Clean up and remove all waste Property details - Location: Point Cook - Rooms/area: small room integrated to the living room + corridor (see photos) - Approx. area: 20m² Quote must be all-inclusive (materials + labour + removal + disposal) No labour-only quotes Offer is for labour. Please itemise materials vs labour Date to be agreed Thanks!

Hi, I’m looking for an experienced flooring installer to supply and install budget laminate flooring in my apartment bedroom located in Footscray, VIC. Room details: One bedroom Size: 3.3 m × 2.9 m (approx. 10 m²) Existing flooring: carpet (to be removed and disposed of) Scope of work: Source and purchase budget laminate flooring and underlay (approx. 10 m²), similar to the examples below: • https://share.google/uCKYCxv8mgIHcZp8e • https://share.google/UEDTBZGXh2ISfGuSO Deliver materials to my apartment in Footscray Bring all required tools and equipment Remove and dispose of existing carpet Install underlay and laminate flooring, including neat edge finishing Timing: Job needs to be completed between 2 January and 10 January Please advise your availability within this period Budget: Approx. $1,000 total, including materials, labour, delivery, and disposal Please include your availability, experience with laminate flooring, and confirmation that materials are included in your quote. Thanks!

Light buff of floors and polish in a 3 bedroom townhouse. Boards are floating floorboards and in good condition, they have faded in some areas from sunlight and we want to touch them up prior to sale. Location: Seaholme, VIC Objective: Restore flooring to near-new presentation suitable for sale campaign Buff & Recoat with water based matte polyurethane (good quality) Meals area is 3.3x4.1m, living area is 4.8x5

The space is 85sqm and currently has carpet flooring. We would like to achieve a look similar to this. It is located on the 3rd floor. Under the carpet is a concrete floor. Could you please provide an approximate cost?

POLISH TIMBER FLOORING - dining/living area. Job to be completed this week. Location Melton South

Need the complete downstairs floor sanded and re polished to the same colour there currently Need only the first two steps of the stairwell to be sanded back and re polished where there is pet damage Estimate the downstairs floor area to be around 35 square meters

sand and polish an existing timber floor in a two bedroom unit

Got approx 104 m2 floor to refinish with water based finish .

Posy house renovation, hardwood floor sanding and polishing

The timber floor need to be sanded and polished to the original color, it is not a big area to be sanded, however, we can think about common hall way to be sanded and polished.

Looking for someone to sand and polish floorboards in residential house. Floor plan attached. Please refer to yellow highlighted areas.

Looking for an experienced professional to polish and refresh timber floorboards in my house. The job includes preparation, polishing, and leaving floors clean and well-finished. Details: • Timber floorboards (good condition) • House is occupied • Own equipment preferred • Experience with floor polishing required Please quote your price and include examples or reviews of similar work. Flexible with dates.

Looking for someone to sand and polish existing floor boards. Pulled up carpet tiles to find these.. job in melton south. Need quotes asap for planning. Job to be completed within the next 4 or so weeks. Yellow areas on floor plan are where the boards are.

Floor sand and polishing 60sqm

15m2 re polish floor boards

Quote needed Floor polish and sanding

Remove vinyl and polish floorboards. 70sqm in total.

Hi,i am converting my shed to a man cave and looking for someone to do polish concrete the floor. Size 5 x 10m. Location Wyndham Vale

Hall 4.6m x 3.5m Bedroom 3.6x2.7 Bedroom 2.5x4 Hallway 4.8x1.5 I need floorboard polish..hard timber

Remove carpet, sand and polish floorboards underneath. Dispose of carpet. Tools to be supplied by you. 2 bedrooms only, 27sqm in total.

hi i need the kitchen floor to be polished. it is for the area of 5m x 5m atm, it is old vinyl flooring, needing to: - remove the old vinyl flooring - re-polish the hardwood timber

Sand and polish 25sqm of flooring Including lounge, dining, hall, butlers pantry. Wanting to keep similar warm brown and pictured in the polished boards in these pictures. But make consistent with the secondhand boards that have been installed. Needing done after first week of November.

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Seeking someone to buff/polish roughly 40 square metres of floorboards. (Wormy chestnut) Per the floor plan only the hallway and living area. Bedrooms and bathrooms are carpet or tile. Floors were fully sanded back 3 years ago with water based clear coat applied. Floors are in good condition with light scratch marks. I am not seeking perfection. Some marks may remain. But I won’t have a full re-sand done so soon as one was only done 3 years ago. I am seeking quotes. I will remove and replace my own furniture. Thanks