Find an experienced flooring expert in NSW

Looking for TWO experienced, reliable flooring installers to lay new flooring in my lounge room and hallway. PLEASE NOTE: Neither the lounge room nor the hallway is particularly large. Both are relatively small areas, so this is NOT a large flooring job. IMPORTANT – ONE DAY COMPLETION REQUIRED The entire job MUST be completed within ONE day, including flooring installation, all finishing work and returning furniture to its original position. Furniture Moving – Important TWO physically capable individuals are required, as furniture will need to be moved before installation and returned to its original position afterwards. There will be NO ONE available to assist with lifting or moving furniture. I’m unsure of the exact measurements, however, I’ve previously had people inspect the areas and advise me of the materials required to complete the job properly. This should give an approximate indication of the size of the areas. Materials required based on previous assessments: * 11 packs of chosen flooring * 9 × Havana Ash concave trims (2.4m) * 8 × Silver transition ramp trims * 3 × QEP 2mm silver underlay (11m² each) * 2 × Packs of Paslode 40mm bullet head nails ALL MATERIALS WILL BE SUPPLIED AND READY TO GO. INSTALLERS MUST BRING THEIR OWN TOOLS AND EQUIPMENT. Please refer to the attached pictures for the chosen flooring. Job Requirements The job is for the SMALL lounge room and hallway ONLY. The installation must include all necessary edging, trims and doorway transitions. Your quote MUST include: * Labour for the complete flooring installation * TWO people to carry out the work * Moving furniture before commencing * Returning furniture to its original position afterwards * Bringing all necessary tools and equipment * Completing all edging, trims and doorway transitions * Completing the entire job within ONE day Please only make an offer if you have the experience, equipment Please provide your best quote Experienced, reliable flooring installers only, please.

Need Labour help to lay and screw down plywood For one day

Install vinyl floor in my kitchen. We are rebuilding a new kitchen, the old one has been removed. Need to install vinyl floor before kitchen installation. The size is 2.1m X 3.3m. The kitchen had vinyl floor before which has been removed now. I am ok with both option - you bring the vinyl roll or I can provide the roll from bunnings.

I have a L shape balcony 13m by 1.350 I can by the deck I only need you to supply labour and structural wood to fix the deck. Being a balcony i am looking to a slimmer solution avoiding increasing the total balcony height.

Hybrid flooring installation Entire Single storey home Approx 110sqm Installation ontop of existing tiles Scope of work: * Install hybrid flooring across approximately * Install required trims for a neat, professional finish. * Install all pine skirting boards * Complete all necessary cuts and finishing work. * Leave the area clean and tidy once completed. Materials provided by me: * Hybrid flooring * ALL TRIM (including universal trim, L trim & end trim) * ALL PINE SKIRTING Requirements: * Previous experience installing hybrid flooring. * Own tools and equipment. Looking for a quality finish at a reasonable price. Please let me know your availability. Thanks

Looking for help to install floating floor board in a room. Need to rip out existing carpet. Dimension is 5.8m x 4.25m. Need to match current look/style of other rooms. See pic for color. Each plank width is 22.8cm.

Looking for an experienced flooring installer to remove existing modular carpet tiles and install new 7mm laminate flooring in an office in Parramatta. The total area is approximately 45m² across four rooms. The job includes: * Removing and disposing of existing carpet tiles. * Preparing and levelling the floor if necessary. * Installing laminate flooring and finishing trims. All flooring materials will be supplied. The laminate uses a click-lock system, so no glue is required. Labour only. The job must be completed on Friday and Saturday (30–31 October), as professional cleaning is scheduled for Sunday before our office opens on Monday. Please provide your quote, experience, availability and estimated completion time. Thank you!

I need vinyl planks to be laid in a new studio we have built. Pretty straightforward job I think. New build, concrete slab and an approx 6x3 rectangle.

Install Eko Deck flooring onto van floor. Flooring and matching clips are supplied. The wheel covers have been enclosed into a rectangular box to make install and cutting easier. You will need the required tools. Current flooring is 15mm marine ply so you can screw straight into it. Approx floor size is 4.3m x 1.8m

Require to replace two mdf floorboard which had water damage as next to bathroom. I have spare mdf floorboards, just require to do remove the damage mdfs & install with good mdf floorboards. I have posted the these mdf shapes which require some cuts to fit in this space in the floor

Install laminate flooring in one sunroom, front room, 3.3m x 2m. Laminate and underlay will be supplied so this is for the install only

I have a small section of floorboards (380 × 680mm) that is open and needs to be filled with matching boards. I have the matching leftover floorboards ready to use in sizing 330x2100mm I need an experienced flooring/carpentry person to cut the boards to size and securely install them so the finished section is neat and level with the existing floor.

Small room, approx 2m x 3m (6m²). Glue-down engineered timber boards, 2m lengths, to be laid as straight planks in a random stagger pattern (Wood Strip) I'm supplying everything: boards, adhesive, and the notched trowel. You just need your own hand tools, saw and vacuum. The job: Approx 6m² total 2m board lengths, random stagger — please work the offcuts so the end joins don't line up or stair-step Glue-down onto construction particleboard flooring. Please have actual flooring experience.

We already have sourced the hardwood to match what is already existing in the house. One bedroom had carpet which we have ripped up and need replaced with the hardwood flooring. Room is approximately 4.5m x 3m

I need to install treads and rises for the staircase for carpet installation needs to be secured I will supply all 19 mil plywood

Looking for someone to install hybrid floor in garage. The garage floor is 16m2. I will supply flooring etc.

Engineered timber flooring installation for 2x3 room. Room is new. The following will be supplied 1. Click lock floorboards 2. Underlay 3. Skirting No painting needed.

Raised brick foundation house has gaps around the perimeter of the house allowing access underneath. Horizontal timber decking installed to cover any access (from dog) under. Approx 25meters

I'm renovating my kitchen and need a small section of flooring installed once the existing kitchen island is removed. Looking for an experienced flooring installer/handyman. Approx. 4m² area where a kitchen island currently sits — once removed, this strip needs new flooring to match the surrounding floor. The concrete slab may need some minor resurfacing once the kitchen island is removed. I've already purchased the matching flooring and underlay (same product as what's currently installed). Existing floor will likely need part of the current layer lifted from one wall edge and relaid, so the new section blends in seamlessly. The space will be ready from Friday 18th July (1pm - 5pm), Saturday morning 19th July (8am - 1pm only), or all day Monday 20th July.

Description: I’m looking for an experienced decking professional to supply and install a new deck in both my front and rear small courtyards. Scope of works: * Total decking area approximately 18–19 m² * Supply and install a basic, good-quality decking material (open to recommendations) * Construct a neat, level, professional finish * Remove and dispose of any waste upon completion Requirements: * Proven experience building residential decks * Please provide photos of previous decking projects or a portfolio of similar work * Must have appropriate tools and experience * Preference will be given to experienced tradespeople with strong Airtasker reviews Please include in your quote: * Estimated timeframe * Earliest availability I’m looking for a quality finish at a competitive price.

My hardwood timber flooring is scratched on a few places because of dining table chairs. Need to polish and seal that section. Don’t know the correct price so please quote reasonably.

Need to sand and polish timber floor in a single-storey house with about 90 sqm of timber.

Scratched destroyed living room floor, then spilt olive oil all over the floor which has stained it - need just a minor fix, not looking to redo all the timber floors

3 bedroom house in Sydney east

Quote for floor sanding and polishing floorboards Sand and polish floor with water based polish 1 sealer 2 top coats 2 pac Loba water base Matt/ satin 105m2 3 bedrooms lounge and kitchen

Need approx 90 m2 or wooden floor boards sanded back and re varnished.

3x 3.8m room grind and polish required

Old wooden floors to be sanded and stained/polish 42m2 total area three small rooms and hallway

We need the floorboards sanded back and polished in a small bedroom. It is 3 m x 3 m. We require own equipment and experience with floorboards. We need done by Friday midday. 🙏

Looking for someone to sand and polish the timber floors in my hallway, entry, study and living room. Total area is approximately 55 to 60 m². Floor plan and photos attached. The floors are solid hardwood floorboards (possibly Tasmanian Oak or a similar Australian hardwood). They have general wear, light scratches and a dull finish in high traffic areas. I want the floors to really shine and look close to new, with a gloss or semi-gloss finish.

Need a 27square meter living room slab polished

Floor sanded back and polished

Change of scope: I was previously looking to get somebody in to resand and polish the floorboards in the main part of our house plus our back deck. But I now just need the back deck done. Deck is approx 6 m × 4 m and needs sanding back to bare timber then oiling All the boards are in good condition apart from one tiny corner of the back deck, which I will have fixed up prior to this work being done.

need a quotation for Timber Deck sanding and polishing - Front Entry Deck - Rear pool deck - Post Box Due date: Flexible

Potts point studio apartment (25sqm) has old pine flooring that hasn’t been touched in 20+ years. Looking to have the floor restored, sanded and polished. Date flexible Thank you!

Sand and polish 12 square metres of floor boards

Small section of timber flooring needs to be installed. This will include purchasing floorboards, install them and staining them ensuring they match the existing flooring. Subfloor may also need to be replaced. Happy to negotiate price pending scope

We removed a cupboard in our hallway and the timber floor underneath needs to be sanded and polished to match the rest of the hallway. The area is very small: 59cm x 117cm

Require professional to clean, polish and seal marble hallway floors, less then 10m square. See photos for approximation.

I need the floorboards in my rental property sanded and polished. The house is empty and the area small. Can be done anytime/any day before Wednesday 10/06/26. See photos for current condition, photos of the area and floor plan showing the size of the lounge/dining.

Hardwood Timber Floor Refinishing. I’m looking for a quote to restore the hardwood timber floor in one bedroom * Location: Liverpool * Size: One bedroom Upstairs (3.8m x4m) * Services Required: * Full floor sanding * Polyurethane polishing * Gap filling between timber boards * Repair of any cracks or damaged timber Thank You

Deck Refinish 15 m² timber deck. Full sand then two coats stain

Sand and refinish timber floor in small room (~9m²). Looking for experienced floor sanding professional (not handyman). Want a light Scandinavian/blonde finish with matte seal—no yellow/orange tones. Please include materials and 2–3 coats. Must provide photos of similar work. Prefer test patch before full job.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Two adjoining rooms have hardwood floors. We have taken up the carpet and tiles that were covering it and we now want to bring the floors up to the same as the rest of the house. Please quote for one square meter on AirTasker and then we can come to an agreement on the final amount (approx 30 sm) First picture shows the floors in the rest of the house. Second and third pictures are the floors that need to be finished.

Recently removed carpet from hardwood floor which needs to be refinished. Two bedrooms (10.5 sqm each) plus hallway (~3 sqm). Will add photos shortly!

We have moved into a 60 year old single level house and want to remove the carpet in the lounge room, dining room, kitchen and hallway and get the original floorboards sanded and polished. There are also an extension that was completed that only has partial board underneath and we would need to add floorboards on top.

Kitchen area 5.5m × 2.5m & small pantry 1.4m x 1.7m

3 bedroom home cypris pine floor to be sanded and refinished. Either 70m2 or 35m2 depending on cost. I might carpet the bedrooms. Thank you.

I need my hardwood floor refinished. Existing floors top polished surfaces are wron out in some areas. Floor needs removal of old finish, and a new top coat. Total area 50sq. m 3x bed rooms 1x living room 1x hallway Please quote a price.

Job Description: I am looking for an experienced flooring professional to refinish my existing wooden floorboards. The boards are already exposed and ready for restoration. The job involves sanding, minor repairs, and applying a finish to give the floor a polished and professional look.

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

I would like the kitchen floor boards to be refinished, the floorboards in the rest of the unit are in good condition - Due date: Before Saturday, 28 January 2023

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022