Find experienced local fencing contractors in VIC

Repair and reqire fence. Move star pickets to tidy shape of garden first

I need a welder or metalworker to replace the two hinges on a wrought iron garden gate. This budget is for labour only. I will supply and pay for the hinges and fixings separately. Please do not include hardware costs in your offer. The gate: Single leaf, approximately 2 metres wide Open picket style, estimated 40–80kg Both the gate frame and the gate post are hollow steel square tube Street-facing front gate on a brick pier Existing hinges are old hand-made welded barrel hinges, rusted and worn Photos are attached — please look at them before making an offer. Scope of work: Support the gate, cut off the two existing welded hinges and grind the surfaces flush Weld the gate-side half of each new hinge to the gate frame. Tack weld and check alignment first, then complete the welds using a staggered sequence to avoid distortion Mark out, drill and bolt the post-side half to the hollow post using through-bolts with backing washers or plates, or rivnuts — not self-tapping screws alone, as the top hinge carries a tensile load Check the gate swings level, closes correctly and does not scrape Clean the welds and touch up all bare metal with cold galvanising primer and a matching topcoat Hinges: I will supply weld-on / bolt-on gate hinges rated to at least 150kg. Please tell me in your offer: What fixing method you would use on the hollow square post Whether you need me to purchase any specific bolts, rivnuts or backing plates so I can have them on site before you arrive I have a second gate of the same type. If this job goes well I will book you for that one as well — you are welcome to quote both leaves together if you prefer. Requirements: Own MIG or stick welding equipment, plus angle grinder, drill and metal drill bits Access to power, or your own generator Demonstrated experience with gate and fence welding — please mention similar jobs in your offer

Need to build a garden gate, please send photos of jobs you have done before.

Fix a garden gate. 1. Replace timbers of gate with original steel frame 2. Replace two gate posts 3. Painting 4. Price includes materials and labor.

Looking for someone handy to do a very basic, low-cost repair to an old timber boundary fence and remove the pile of branches/garden waste shown in the photos. My budget is genuinely quite small, so I am not looking for a new fence, professional restoration or anything cosmetically perfect. I just need someone to: * Push/straighten the existing fence back roughly into position. * Secure it so it isn’t leaning into the neighbour’s property. * Close up the larger gaps so my young kids can’t get through. * Screw/nail existing timber back together where possible. * Patch any obvious gaps with old/recycled palings or inexpensive timber if needed. * Remove the pile of dead branches and garden waste. * Leave the area reasonably tidy. Please reuse as much of the existing fence as possible. Second-hand/recycled timber is completely fine. I don’t care what it looks like as long as it is reasonably secure and safe. I understand the fence is old and this is only intended as a temporary/basic repair. Very limited budget – please only offer if you’re happy to come up with a simple, economical solution.

I'm looking for an experienced fencer/fabricator to install a steel palisade fence along my front boundary line (between my property and my neighbour's), extending into the front garden. We want black powder-coated steel, matching a classic/traditional style to suit a red brick home.

Need a whole new double sided gate latch installed. I’ve bought the hardware from Bunnings. Needs to be drilled into mental framed gate.

Straighten a fence after having a creeper on it. Add sleepers to raise the height of garden bed

Repair the garden barrier see pic in hallam today

Building a fence around a carport. This needs to include an access gate and the ability to support climber plants Type of gardening: Other Size of garden: 50m²-150m² Has green waste bin: No

Need just a very basic fence to keep chickens in one area. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I have two garden gates that are currently wooden and damaged, and I need them removed and replaced with new Colorbond garden gates. The approximate dimensions are 194 cm high by 86 cm wide. Because I am not a professional, there might be about a 5% margin of error in my measurements, so I would need you to come out to do a precise measurement after accepting the job before proceeding with the installation. Could you please provide a total quote covering both gates, including materials and labor? I am hoping to get this installed as soon as possible.

I haven’t purchased any materials, looking to put a small gate in to block dogs from getting to rest of garden while I’m doing some work on rest of it.

The door seems to be shifting away from the door frame. As a result, the latch is becoming more and more misaligned with the strike plate, making it difficult to lock properly.

* Relocate the existing galvanised steel garden gate, approximately 1,850 mm high × 950 mm wide. * Reposition the gate approximately 15–20 mm from the hinge side to allow clearance for the metal privacy angles. * Install two 1,000 mm lengths of 40 × 40 mm galvanised equal angle to the existing brick pier. * Position the angles to provide privacy along the latch side while allowing the gate to move freely during seasonal and weather-related movement. * Install the gate lock to the gate and brick pier. * Check and adjust the gate alignment to ensure it opens, closes and locks smoothly. Please note: The galvanised angles and gate lock will be supplied on-site.

I’ve just had my house restumped and the front door is getting jammed. Need someone to fix it so that it opens and closes smoothly. The back gate is also not opening/ closing and needs a few more screws in fence to secure it. Let me know if you can help

I need someone to replace a damaged hinge on my garden gate. The gate is currently misaligned and not opening/closing properly. A new replacement hinge will be provided (see picture). Please bring your own tools.

Bad job done by previous owner resulting in loose gate and disconnected screws at opening. Need assessment for best way to repair or improve

复制这个👇（我帮你精简到最适合 Airtasker 的版本） Need someone to build and install a sturdy freestanding support structure for climbing roses (James Galway) in my backyard garden bed. My existing timber fence is old, so nothing should be attached to the fence. I need 2 independent steel or heavy-duty timber posts installed securely in the garden bed, with horizontal stainless steel wires between them to support climbing roses. Approx height 1.8–2m. Please quote including materials and installation. Located in Glen Waverley. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: No

I need someone to put up these garden fences along the backyard to prevent my dogs running up and down and pushing the soil down. Will have to remove the thin wire fencing in the photo before putting these up.

We need a baby gate installed upstairs and was hoping to have a custom wooden gate built and installed for in the entry hallways of our house

ideally would like a fence that is not a permanent structure as we are renting so that our dog does not escape possibly would also like to cover up cables and pool pump so he does not have access

I need to make a very strong fence so my samoyed dog cant push it down. He is quite big size for male. But will prefer the steel type so he can still see things in between. Will have 2 gate to open in and out. One for the left side and 1 for the right side (the left wooden fence need to be taken out). Please quote for me the fence, the height and the price thanks. Wide around 5.5m from far left to right.

Hi, I’d like someone to cut one of the vertical bars on this pet gate so that my cat can get through, but my dog can’t. * Bar diameter: 13 mm * Cut the bar at the top and bottom * Sand/grind the cut ends so the frame is flat and smooth Preferably someone in the northern suburbs. I’m happy to drop the gate off and pick it up. Please let me know if you have the tools and can do this. Thanks!

Description I need a handyman to fix the alignment of the latch on outdoor gate. As shown in the photos, the latch and catch are currently not lining up correctly. I would like a small wooden piece/block added behind the catch/keeper to raise it and bring it into the correct position and alignment with the sliding latch. The existing latch can be reused if possible. The main requirement is to: * Add a suitable wooden piece behind the catch. * Raise and reposition the catch so it lines up with the sliding bolt. * Secure the wooden piece and catch firmly. * Make sure the latch slides in and out smoothly and holds the gate securely when closed. I require a valid invoice to be issued immediately upon completion of the job Please bring suitable timber and tools to complete the job.

Hi there, I am looking for an experienced tradesperson/contractor to design and install a custom indoor wooden dog fence. Project Details: * Type: Indoor wooden dog safety fence / enclosure * Height: 1.2 meters * Length: 7.6 meters * Material: Solid wood. * Fixing Method: The wooden fence should be installed with posts securely anchored directly into the floor (not freestanding). The floor has an epoxy quartz coating, and drilling into the floor is permitted. * Design: Similar to the attached picture, with a walk-through gate and a secure latch. Quote Request: Please provide your rate per meter (including materials and labor), or a rough estimate based on these dimensions.

The job includes: - Supplying and fixing four steel fence panels onto an existing timber boundary fence/wall (see images for fence panels) - The steel fence panels can be either new or second-hand, as long as they are in good usable condition - Cutting down two trees that are growing close to the timber fence - Tree stump/root removal is not required.The cut-down trees do not need to be taken away. - Installing two cat doors into timber bedroom doors. The cat doors have already been purchased Please contact me with your availability and an estimated quote including materials.

Fence a partially existing dog fence, but increase its size, most posts exist, need a human gate. Use equimesh or like. Job is immediate - pls submit price

Looking for someone to install a retractable dog gate in my home. The gate has already been purchased and just needs to be securely installed as per the manufacturer’s instructions. Requirements: * Experience installing similar gates * Bring your own tools * Ensure the gate opens, closes and locks properly may need to drill it on one side - pls bring own tools

I knocked the gate catcher for our shared driveway mechanical gate. Not the gate itself, that's working fine. I've realigned the catcher and everything is working with no issue but I think the bolts have come loose in the brick and are potentially slightly bent. It seems secure enough now but I'm looking for someone that's familiar with these gate catchers to come and properly secure it flush with the bricks as I don't want the catcher to come loose over time.

I have a PetSafe underground wired dog fence installed around a 1.5-acre property in Indented Head, VIC. The transmitter has been tested and is working correctly, so there is a break somewhere in the boundary wire. The majority of the boundary wire is clipped to a wire fence around the property perimeter, making it accessible for inspection. There is also a short section that runs underground across the driveway. I’m looking for someone with suitable cable tracing/fault-finding equipment to: * Locate the wire break * Expose the damaged section if required * Repair the wire using appropriate waterproof connectors * Test the system and confirm it is fully operational before leaving Please advise: * What equipment you use to locate underground or boundary wire faults * Your experience with PetSafe or similar pet containment systems * Estimated cost to locate and repair * Your availability I would prefer someone who has experience with wire fault finding rather than general handyman troubleshooting. Location: Indented Head, VIC If the repair is not practical or there are multiple breaks, I would also be interested in a quote to replace the boundary wire.

Install Stratco gate and panel on posts - from side of house to wooden fence 4.7 total approx. 1.8m high

I need a dog gate for my side yard. House is hebel and fence is timber. We had one done for inside the house and if you can do something similar for the side yard that would be amazing

I need a pet fence/ gate built please

Fix it so they can’t get out

I need some fence repair done. I wish to do a face to face discussion - to explain what exactly I am looking at. The property is now rented and we can plan a visit to discuss the same. The property address is in Carrun Downs

Hi, need someone experienced to fix my client fence today. There are gaps and my small dog can escape. Gates also need to be properly secured and able to lock. Main areas: side fence + 2 gates (see photos). Need it to be strong, fully dog-proof, and reasonably neat in appearance. happy to pay more for same-day completion.Please send photos of previous work. Must have Experience required.

The gate stopped locking properly because the latch tongue is misaligned with the recess. See photo. Inspect the gate and provide a quote.

I need my wrought iron garden gate secured. I have two mini daschunds who can climb through it under the gaps in the metal work. I’ve tried to diy myself but it’s not weatherproof solution or doesn’t withstand them climbing on it. I have a rental so can’t change the entire gate and am looking for a tough mesh solution that looks ok.

Need a temporary fence or gate to be pit up to keep dog off roof i need this done urgently as the Cancel has come out

Need to replace our outdoor fencing with colourbond, looking for someone that can give us a quote. Materials will need to be included.

Remove wood gate at entry to back garden. Instal double opening Colourbond gate to two Colourbond posts, not to be concreted in but to be screwed to existing aggregate.

I’m looking to get a quote for a Colorbond fence for my house. The approximate block dimensions are: * Width: 12.5 metres * Length: 28 metres Could you please provide a quote for the supply and installation of the Colorbond fencing, including posts, concrete and all required materials? Please also let me know: * Available Colorbond colours and styles * Estimated installation timeframe * Warranty details * Whether there are any additional costs

One section of my Colorbond fence is slightly loose and shakes/rattles when it’s windy, creating quite a bit of noise. Looking for someone experienced with Colorbond fencing to inspect it and securely fix the loose section/posts/rails as required. The fence is beside the house/air-conditioning outdoor unit, so access is a little narrow (see attached photo). Job: • Identify where the movement is coming from • Tighten/re-secure the fence, rails or post as required • Stop/reduce the rattling and movement in wind • Supply any small screws/brackets/fixings required • No full fence replacement expected unless you find a larger issue

A few panels of my colourbond fence have come off. I'm missing the bolts for them. They're very finicky and they will probably require new bolts/screws to be set in place.

Apply two sets of fence extensions: 1) Timber lattice on right hand side of house (approx 5 panels). 2) Colourbond lattice fence extensions (30cm). Approx 6 panels Ideal installation on Friday 2nd October, or 4pm 1st October if can be completed in council regulated timeframe. Tasker to please provide all materials.

Need an experienced trade to repair a Colorbond fence: 1. Supply & Install 2 small Sheets: Fill the missing panel gaps with matching Colorbond sheets (Color looks like Paperbark/Classic Cream), including top/bottom rails.  2. Realign Leaning Section: Straighten and secure the leaning fence panels adjacent to the gap.  Quote must include all labor and materials.

Need to replace old wooden fence (26m) with a 1.8m high Colorbond fence. - Sleepers: bottom 50x200mm treated pine sleepers - Removal and disposal of old fence

Collar bond fence panel removed and reinstall it again after we finish the job

Colorbond fence detached from the corner post and leaning on a garden shed. Also, fence is not straight. Need to re-attach the fence to the corner post and straighten the fence. Length of the fence is 16m.

Couple of Colorbond fence has been damaged. Need someone to fix with the existing panels available.

Remove existing fence and gate, installation of new fence and gate, and disposal of waste. Fence details: 59.8m long 2.3m height 2.1m colorbond sheet with 200mm sleeper 25mm galvanised screws to secure sleepers 25kg of concrete for each post 800mm/1m post hole depth Gate details: 1.6m length 25mm galvanised screws to secure sleepers 50kg of concrete for each post Steel post 800mm/1m post hole depth Premium lock

Supply and install colorbond fence extensions to three panels. Looking at 600m (H). Ideal date to install is 2nd October in the afternoon.

Colourbond perimitter fencing 1.8m high Sleeper required Removal of fence Roughly 90m

Require a colour-bond side gate to be installed. Dimensions are approximately 1200mm W by 1600-1800mm H

We need a section of this timber fence removed at the back of our property, which faced onto a laneway. Gate must open inwards. Looking for a secure, lockable privacy gate in monument grey colorbond with steel frame, concreted in. Just a pedestrian gate, just next to the shed we are modifying in the photos. . Gate to be 1800 x 1200 wide Access is easy from the laneway. this is both to supply and install.

I would like a fence and gate installed at my property. It is only a total of 3.5m wide. Classic cream would be preferable.

Fix side gate latch to ensure gate open and close properly. Currently the latch scrapping the brickwork therefore hard to open/close the gates

We have an existing Colorbond fence. I have purchased fence extensions for it through the company Screenline and require someone to install it for me. This is the link to the product for more information, https://screenlinesystems.com.au/products/fence-extensions-for-colorbond-fences

Colourbond fence panel and Gate need repair. Wind led to their dislocation