Find experienced local fencing contractors in VIC

I haven’t purchased any materials, looking to put a small gate in to block dogs from getting to rest of garden while I’m doing some work on rest of it.

Fence on Front garden. I am happy to provide the material or if you can organise that will be great. The amount offered is only for installation. The area to be covered is only 14.8 metres, needs low fence probable 900m height just to avoid leaves and litter coming to my front yard/garden. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

Wanting to fence off my garden patch so the dog can’t access. Needs to have a gate mechanism.

We are putting in a sliding gate at the front of our property and need to remove the existing fence and brickwork. Also build back the garden with a wall so sliding gate can fit along side the fence. Would prefer wall to be built with volcanic rock on site already / steel posts and timber or bricks but open to recommendations. Include tip fees in quote to remove. Please let me know if you have any questions or want more photos

The door seems to be shifting away from the door frame. As a result, the latch is becoming more and more misaligned with the strike plate, making it difficult to lock properly.

The lock on the backyard side gate has come loose because the mounting screws are missing. Please reinstall the lock by fitting new screws and securely fastening it to the gate so that it can be locked properly. In addition, please install a lifting bar (gate latch lifter) on the side gate lock so that the gate can also be opened from the outside. remove the exposed nail from the wooden strip on the ground in the backyard. Please refer to the location indicated by the red arrow in the attached photo.

* Relocate the existing galvanised steel garden gate, approximately 1,850 mm high × 950 mm wide. * Reposition the gate approximately 15–20 mm from the hinge side to allow clearance for the metal privacy angles. * Install two 1,000 mm lengths of 40 × 40 mm galvanised equal angle to the existing brick pier. * Position the angles to provide privacy along the latch side while allowing the gate to move freely during seasonal and weather-related movement. * Install the gate lock to the gate and brick pier. * Check and adjust the gate alignment to ensure it opens, closes and locks smoothly. Please note: The galvanised angles and gate lock will be supplied on-site.

I’ve just had my house restumped and the front door is getting jammed. Need someone to fix it so that it opens and closes smoothly. The back gate is also not opening/ closing and needs a few more screws in fence to secure it. Let me know if you can help

I need someone to replace a damaged hinge on my garden gate. The gate is currently misaligned and not opening/closing properly. A new replacement hinge will be provided (see picture). Please bring your own tools.

Bad job done by previous owner resulting in loose gate and disconnected screws at opening. Need assessment for best way to repair or improve

复制这个👇（我帮你精简到最适合 Airtasker 的版本） Need someone to build and install a sturdy freestanding support structure for climbing roses (James Galway) in my backyard garden bed. My existing timber fence is old, so nothing should be attached to the fence. I need 2 independent steel or heavy-duty timber posts installed securely in the garden bed, with horizontal stainless steel wires between them to support climbing roses. Approx height 1.8–2m. Please quote including materials and installation. Located in Glen Waverley. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: No

I need someone to put up these garden fences along the backyard to prevent my dogs running up and down and pushing the soil down. Will have to remove the thin wire fencing in the photo before putting these up.

Put a fence on my garden prevent my dogs jumping in and dig, I don’t have material provided.

Restump and fix garden fence section that has toppled over so that it sits upright and the garden gate can close again

I want to put a fence or something around the garden in the backyard so my dogs can’t get in and dig. Feel free to source the materials yourselves. It would be best to fully enclose the area, so my dogs can’t get in .

Hi, we need to build a 7-9M length ,90 cm height white pvc fence with a small entrance gate. Example in second picture

repair falling garden barrier see pic

Clear garden then carry out minor repairs to fence, paint fence, turn over topsoil, remove besser blocks and concrete pavers, move soil mound into bin

They hinge of our driveway gate have come off the timer. We will need 2 new hinges and the gate installled to fix this

The gate came off its hinges and fell

Hi there, I am looking for an experienced tradesperson/contractor to design and install a custom indoor wooden dog fence. Project Details: * Type: Indoor wooden dog safety fence / enclosure * Height: 1.2 meters * Length: 7.6 meters * Material: Solid wood. * Fixing Method: The wooden fence should be installed with posts securely anchored directly into the floor (not freestanding). The floor has an epoxy quartz coating, and drilling into the floor is permitted. * Design: Similar to the attached picture, with a walk-through gate and a secure latch. Quote Request: Please provide your rate per meter (including materials and labor), or a rough estimate based on these dimensions.

The job includes: - Supplying and fixing four steel fence panels onto an existing timber boundary fence/wall (see images for fence panels) - The steel fence panels can be either new or second-hand, as long as they are in good usable condition - Cutting down two trees that are growing close to the timber fence - Tree stump/root removal is not required.The cut-down trees do not need to be taken away. - Installing two cat doors into timber bedroom doors. The cat doors have already been purchased Please contact me with your availability and an estimated quote including materials.

Fence a partially existing dog fence, but increase its size, most posts exist, need a human gate. Use equimesh or like. Job is immediate - pls submit price

Looking for someone to install a retractable dog gate in my home. The gate has already been purchased and just needs to be securely installed as per the manufacturer’s instructions. Requirements: * Experience installing similar gates * Bring your own tools * Ensure the gate opens, closes and locks properly may need to drill it on one side - pls bring own tools

I knocked the gate catcher for our shared driveway mechanical gate. Not the gate itself, that's working fine. I've realigned the catcher and everything is working with no issue but I think the bolts have come loose in the brick and are potentially slightly bent. It seems secure enough now but I'm looking for someone that's familiar with these gate catchers to come and properly secure it flush with the bricks as I don't want the catcher to come loose over time.

I have a PetSafe underground wired dog fence installed around a 1.5-acre property in Indented Head, VIC. The transmitter has been tested and is working correctly, so there is a break somewhere in the boundary wire. The majority of the boundary wire is clipped to a wire fence around the property perimeter, making it accessible for inspection. There is also a short section that runs underground across the driveway. I’m looking for someone with suitable cable tracing/fault-finding equipment to: * Locate the wire break * Expose the damaged section if required * Repair the wire using appropriate waterproof connectors * Test the system and confirm it is fully operational before leaving Please advise: * What equipment you use to locate underground or boundary wire faults * Your experience with PetSafe or similar pet containment systems * Estimated cost to locate and repair * Your availability I would prefer someone who has experience with wire fault finding rather than general handyman troubleshooting. Location: Indented Head, VIC If the repair is not practical or there are multiple breaks, I would also be interested in a quote to replace the boundary wire.

Install Stratco gate and panel on posts - from side of house to wooden fence 4.7 total approx. 1.8m high

I need a dog gate for my side yard. House is hebel and fence is timber. We had one done for inside the house and if you can do something similar for the side yard that would be amazing

I need a pet fence/ gate built please

Fix it so they can’t get out

I need some fence repair done. I wish to do a face to face discussion - to explain what exactly I am looking at. The property is now rented and we can plan a visit to discuss the same. The property address is in Carrun Downs

Hi, need someone experienced to fix my client fence today. There are gaps and my small dog can escape. Gates also need to be properly secured and able to lock. Main areas: side fence + 2 gates (see photos). Need it to be strong, fully dog-proof, and reasonably neat in appearance. happy to pay more for same-day completion.Please send photos of previous work. Must have Experience required.

The gate stopped locking properly because the latch tongue is misaligned with the recess. See photo. Inspect the gate and provide a quote.

I need my wrought iron garden gate secured. I have two mini daschunds who can climb through it under the gaps in the metal work. I’ve tried to diy myself but it’s not weatherproof solution or doesn’t withstand them climbing on it. I have a rental so can’t change the entire gate and am looking for a tough mesh solution that looks ok.

Need a temporary fence or gate to be pit up to keep dog off roof i need this done urgently as the Cancel has come out

Please let me know if you can do it for 100 bucks two gates?

We would like to install dog wire fence essentially install star pickets and then attach dog wire onto the star pickets and fasten them properly. I am happy to provide material and you can quote me for labour about 40m length. Star pickets and dog wire can be provided.

I have a dog gate which I need installed into the wall with drilling, but one of the spots where it needs to be drilled has live wiring nearby, so need someone who can safely do this (see images of my wall and an example photo of the gate to be installed). The gate to be installed is called the Dog Space Rocky Large Extra Tall gate from PetCircle

There are some gaps in my trees from my little courtyard and I need to put a little fence up so my dog cannot escape

Have purchased a giants solar fence energiser and fence wire and require to instal on fence

Install an 11M Colourbond Fence and remove and take the existing wooden fence. Materials to be provided. The entire fences need to be removed but only the picket fence need to be replaced. There is a gate that needs to be relocated from its current position to the border fence area. • COLORBOND® steel boundry fencing 2360 wide 1800 high • 14 sheets • 9 posts • 9 rails

Have a large area of Colourbond fencing I need extension /lattice all the way down roughly 63m and I don’t want timber I want Colourbond similar to last photo

Colourbond perimitter fencing 1.8m high Sleeper required Removal of fence Roughly 90m

Replace 20m colorbond fencing with same ( different colour) including 3.4m to gate ( metal frame) Remainder is to wooden frame in good condition - colorbond fencing supplied.

Scope Overview Seeking an experienced fencer or contractor to supply and expertly install three Colorbond gates on site. High strength structural stability, security, and precise plumb alignment are essential requirements. Door panels must be securely fixed to black posts. Gate Specification 1: Single Side Pedestrian Gate Quantity: One single door gate. Dimensions: 1.8 metres high by 0.95 metres wide leaf span. Post Specifications: Supported by two black steel posts, 10 cm (100 mm) square profile, concreted into ground footings. Hardware: Premium heavy duty hinges, latch mechanism, key lock, and handles. Gate Specification 2: Double Security Driveway/Side Gate Quantity: One double door gate set (two doors total). Dimensions: Each door leaf measuring 2.1 metres high by 1.2 metres wide (total opening span 2.4 metres wide by 2.1 metres high). Post Specifications: Heavy duty black steel posts, 10 cm (100 mm) square profile, concreted into ground footings to support door weight without sagging. Security Hardware: Premium internal lock, quality drop bolts installed into ground sockets for high security anchor points (not a sliding door) Installation and Finish Requirements Ground Conditions: Rocky basalt clay ground. Contractor must provide suitable tools and excavation equipment for post footings. All gates, frame structures, and post connections must be rigid, perfectly plumb, square, and sag-free. Quote must include supply of all gate frames, Colorbond sheets, black posts, locks, latches, drop rods, concrete premix etc.

Replace damaged colourbond panels

Just after a quote for neighbour colorbond fencing

Install backyard gate side of house

I need color fence around my residential property. Total length 96 meters, height 1.8meter.

I need to install a colorbond fence with gate momentum colour. 2m high 4m long without slipper and need to install on the concrete and other side install a post. Please see attached photo. Building wall to tools shed see photo. Materials need to supply by installer. Thanks

I need colorbond fence around my property

Require a colour-bond side gate to be installed. Dimensions are approximately 1200mm W by 1600-1800mm H

We need a section of this timber fence removed at the back of our property, which faced onto a laneway. Gate must open inwards. Looking for a secure, lockable privacy gate in monument grey colorbond with steel frame, concreted in. Just a pedestrian gate, just next to the shed we are modifying in the photos. . Gate to be 1800 x 1200 wide Access is easy from the laneway. this is both to supply and install.

I would like a fence and gate installed at my property. It is only a total of 3.5m wide. Classic cream would be preferable.

Fix side gate latch to ensure gate open and close properly. Currently the latch scrapping the brickwork therefore hard to open/close the gates

We have an existing Colorbond fence. I have purchased fence extensions for it through the company Screenline and require someone to install it for me. This is the link to the product for more information, https://screenlinesystems.com.au/products/fence-extensions-for-colorbond-fences

Colourbond fence panel and Gate need repair. Wind led to their dislocation

Fencer required to install 8.9m (long) x 1.95 (high) genuine Colorbond fence (Woodland Grey) with timber sleepers. Fence to taper down in heigh towards footpath please. + Remove old fence

Hi — I’ve got a Colorbond panel fence at 1.8 m height. One steel fence post has moved due to poor installation and wind. Panels are fine. I need the post reset properly with new concrete footing.

Install a colourbond side gate (measured and onsite ready). new Concrete path poured 2 weeks ago Need holes drilled and gate/posts fitted. see images