30 Electricians in Windsor

Two down lights out in kitchen

Looking for electrician to disconnect and cap electricals for: - a small wooden garden shed for demolition (powerpoint and 2 overhead lights) and - small kitchen/small bathroom/small laundry for demolition/renovation (multiple powerpoints and 3 overhead lights) (these 3 rooms are all located together in the same part of the house) Job located in Prahran Looking for assistance ASAP.

We are renovating and have taken down all our walls and ceiling and require the wiring checked/new wiring put in.

I need someone to pick up an oven I bought, come to my apartment and take out (and dispose) of the current oven, and install the new one.

3 lights in kitchen / dining out - changed globe but still wouldn’t turn on so may be transformer (?) Kitchen ceiling 3.5mhigh, dining 4.5m high (approx)

Will not drain or spin, believed small item trapped in drainpipe or motor.

Hi there.. I have a new HPM Aqua powerpoint that I need installed outside. It needs to be fixed to an MDF wall, which I've confirmed is both hollow, and contains power for a dual power point - and the AC compressor. Assume we can extend off the power point. Should be a quick and easy job. The wall is MDF and plasterboard only. No brick or heavy drilling. You will need appropriate tools to create the 3 inch hole for the back of the power point.

Electrician required to Install two outside light in Windsor. See photos I also have numerous other small jobs I would like quotes on when the lights are installed.

I will be soon demolishing my car port. I require a licenced electrician to disconnect and isolate the car port power from the house, and install an outdoor power point where the conduit comes out of the house. Outdoor power point to be provided by owner (which is currently installed in the carport). Thursday 21 January between 9am and 12pm or 1pm and 5pm.

Hi there Flexible on date. I am looking for someone to install a pendant light. Pictured is the light with an Mo arrow to where I'd like it installed. I've also got a pic with an arrow to the light switch. Ideally I'd like an addition switch on the wall (pictured) but if that's not possible I can put it on the same circuit as the current light with a smart bulb. The pendant weights approx 2kg and will need to be secured to the ceiling. The light fitting is pictured and I'm happy to get an alternative fitting if needed. There is ceiling access from a room opposite but since it's an apartment there is about 40cm of clearance there. You will need; a tall ladder (it's 4-5m from ground to the fitting), tools to cut the hole in the ceiling, any additional cabling and light switch single to double if possible.

I have 4 hanging lights that need to be converted to downlights. They are already wired to switches, I just need to add two dimmers. Two lights per dimmer. I have two power points and two light switches that need to be moved about 1 metre each along the same wall. We are doing renovations and the plaster on the existing wall is able to be cut away to permit the feeding through of cable to the new locations. There are also two wall lights that have to be wired, with a run of about 2 metres into a timber-framed wall that has not yet been plastered. It's a very simple job and would take long.

Need to put two coach lights and 2 spot light with 2 separate dimmer switches

My GHD hair straighteners have a loose connection which is stopping them working. It seems to be where the cable joins to the straighteners. Can anyone fix this?

Looking for an electrician with equipment for a half day of work, Task include re wiring internet cable Re instating powerpoints / air con New cables for plug in lighting

I will be soon demolishing my carport and will need to disconnect the power. Where the conduit exits the house, I would like to disconnect the cable and install and outdoor power point. See photo below. The supply of the power point will come from the existing one in the garage, so just install.

Hi there Flexible on date. I am looking for someone to install a pendant light. Pictured is the light with an Mo arrow to where I'd like it installed. I've also got a pic with an arrow to the light switch. Ideally I'd like an addition switch on the wall (pictured) but if that's not possible I can put it on the same circuit as the current light with a smart bulb. The pendant weights approx 2kg and will need to be secured to the ceiling. The light fitting is pictured and I'm happy to get an alternative fitting if needed. There is ceiling access from a room opposite but since it's an apartment there is about 40cm of clearance there. You will need; a tall ladder (it's 4-5m from ground to the fitting), tools to cut the hole in the ceiling, any additional cabling and light switch single to double if possible.

Builder pulled nbn out when restumping now not working

2 coach lights Spot light Sonos connection to wire Need to dimmer

Hi! I need a qualified Electrician to Instal 8 additional downlights to the already existing ones. (2 extra in the living, 2 in bed 1 and 2 in bed 2). into my unit (apartment complex) and make dimmable in the living space + 2 bedrooms. I am supplying downlights. The roof isnt directly accessible but should still be do-able as there are holes in the existing from the other lights. Location: windsor 3181

I have two power points and one light switch that needs to be changed. i have purchased the items to be replaced. So ill i need is some that is qualified to do the replacing.