Find trusted local electricians in Parramatta

Power supply and motor and cables all there. Need to run cable a very short span (< 1 m) and connect to Beninca Bull Gate motor. All new materials.

I need a power point installed on a wall. Aircon switch and light switch is next to where I need it placed

Need electrician to connect my front fence sliding gate to meter box

**Licensed Electrician Required – Multiple Electrical Jobs – North Parramatta** Looking for a licensed electrician to complete the following work: **Replace existing fittings:** - 3 x two-gang light switches - 10 x one-gang light switches - 11 x double power points - 1 x single power point **Additional work:** - Diagnose and repair the non-working outdoor power point supplying the hot water/gas system. - Install 2 x outdoor sensor lights: 1 near carport and 1 in garden. - Install 1 x new power point below the stairs. - Install 1 x new weatherproof power point near the carport. - Install 2 x LED sensor strip lights under bathroom vanities, 1 in each bathroom. Connect to suitable power, conceal wiring/driver neatly where possible, position sensors and test operation. **I will supply:** - All Clipsal replacement switches and power points - Clipsal power point for below stairs - Weatherproof power point for carport - 2 x outdoor sensor lights - 2 x LED sensor strip light/sensor kits for bathroom vanities Electrician to supply required cabling, connectors, mounting accessories and standard installation consumables. Please quote for complete labour and installation. Any significant additional work due to damaged wiring, circuit faults or switchboard issues must be discussed with me before proceeding. Must be completed by a licensed electrician.

Title: Licensed Electrician Needed – Remove 13 Pendant Lights Looking for an experienced, licensed electrician to remove a total of 13 pendant lights from an office space. Please see the attached photos for reference: * 3 pendant lights – as shown in the first photo. * 10 pendant lights – all identical to the one shown in the second photo. Scope of work: * Remove all 13 pendant lights. * Safely disconnect and terminate the electrical wiring in accordance with Australian electrical safety standards. * Ideally, patch and repair the holes left in the ceiling, leaving a clean white finish. Important: If you are an electrician but cannot patch and repair the ceiling holes, that’s absolutely fine. We can arrange for someone else to complete that part. Please confirm whether your quote includes ceiling repairs or electrical work only. A valid electrical licence is required. Please let me know your availability and provide your quote.

Looking for a licensed electrician experienced in EV charger installations to install my Tesla Wall Connector in my private garage at an apartment building in Westmead. Details: * I already have the Tesla Wall Connector, so installation only is required. * Private, enclosed garage. * The electrical meter room is very close, with only one garage between my garage and the meter room. * Require proper wiring, circuit protection and a neat installation. * Installation must comply with Australian electrical standards. * Electrical compliance certificate required upon completion. Please provide your best quote, including labour, cabling, circuit protection and any other installation materials. Happy to share photos or arrange a site inspection if needed.

- Prepare lead/jetline wire in existing conduit (runs from front to side house) for NBN installation

Looking for a fully licensed and insured NSW electrician to diagnose an intermittent electrical fault with an existing Rheem 400L electric hot water system (Controlled Load 1 / off-peak). The C20/30mA RCBO has tripped repeatedly, sometimes even during daytime hours. It can sometimes be reset, but not always. Scope of work: Test the RCBO and identify the cause of tripping. Check the off-peak supply, wiring, insulation resistance, earth leakage and connections. Confirm whether the existing circuit is safe and suitable for a replacement Rheem 491400 (4.8kW). Explain findings and recommend any necessary repairs. Budget covers initial inspection, electrical testing and diagnosis only. Any repairs or replacement parts will be quoted separately and require my approval before proceeding. Please confirm your NSW electrical licence, availability and whether you have the appropriate testing equipment.

Electrician to upgrade the lights , Single Storey, Lights will be supplied 1) Living 1 - Replace light with pendant hanging light 2) Living 2 - Replace current light with a hanging light or Pendant light 3) Living 2 - Install 4 additional new down lights - requires new switch 4) Bed 1 - Install 4 new down lights - requires new switch 5) Kitchen - Install 4 new down lights 6) Laundry - Replace exisiting light with similar round light 7) Bathroom - Replace exisitng light with a new light

Looking for a licensed electrician to inspect an existing power outlet in my private apartment garage in Westmead, NSW 2145. I own a 2022 Polestar 2 and would like to use the existing garage outlet for overnight EV charging, subject to strata approval. Strata has requested written specifications and an electrical assessment from a qualified electrician confirming whether EV charging can be safely accommodated without overloading the existing circuit. Scope of work: * Identify existing socket amperage (10A/15A). * Assess wiring, circuit capacity, breaker and RCD protection. * Determine the maximum safe continuous charging current. * Assess the additional electrical load and any limitations. * Provide a brief written report with findings and recommendations suitable for submission to the strata committee. This is for inspection and documentation only. No installation or modifications required at this stage. Please provide your quote, availability and NSW electrical licence details.

Licenced electrician required to install a Tesla wall charger in the garage. 3 phase meter box on the left side of the house - garage is on the right side - front age is 10 meters - so approx 7m cabling. The house is split level- entrance at ground level - meterbox on level below. can run wires via store room on level below to garage. would probably need onsite quote.

I’m looking for someone who can handle plumbing, electrical work, and general handyman jobs. The tasks include: - Unblocking a sink - Reattaching and securing a cabinet corner bracket that has come loose - Tightening a loose toilet seat - Refitting the air conditioner cover - Reattaching a towel hook to the wall

I need a licensed electrician in NSW to replace three existing power points. I will supply the new power points. Thank you.

NBN port connection has fallen from plate into hole in wall. Urgently needs to be reinstated so NBN box can be reconnected. Wifi extender also needs to be connected once repair completed.

Two tasks - Replace existing led light to batten light - Remove existing chimney and install new chimney Please give quote separately if you can do only one task. If you can do both, pls quote with visiting, Airtasker and your service fee together

I have a single downlight in the dining room that pops on/off and sometimes not at all. I've changed globes - that's not the issue. I also have an exhaust fan in an ensuite that does not work.

Need licensed electrician to inspect, repair and replace, if required 1 DC ceiling fan . Replacement fan will be provided. Height of installation approx 2.7 m

Rebooking task between James and Manogran

Install 2x1.2m long LED strips under bathroom cabinets(Power is available inside the cabinet) Replace 13 existing socket style downlights with plugged in DL's Replace existing GPO to recessed. All supply and Install.

I’m looking for a qualified and licensed electrician to supply and install 3 new light fittings, including globes, at my property. There are: * 1 light fitting in the garage * 2 light fittings in the carport/driveway * The existing fittings are the older fluorescent-style fittings shown in the photos. * Two of the existing lights are no longer working. * I would like all three fittings replaced with suitable new LED light fittings, including the appropriate globes. Location: Garage and carport/driveway areas – photos provided showing the exact locations and existing fittings. Requirements: ✅ Must be a licensed/qualified electrician ✅ Must be appropriately insured ✅ Supply 3 suitable replacement LED light fittings and globes ✅ Test all three lights to ensure they are working correctly I’m happy to consider recommendations for suitable fittings, but would prefer good-quality, practical LED fittings rather than anything overly expensive. Please provide your quote including labour and supply of the three fittings/globes. I’m flexible with timing and can arrange a suitable day/time. Photos of all three existing light fittings and their locations are attached.