Find local ev charger installers in Parramatta

I need to get Ev charger installed

Charger supplied by me (Tesla Wall Connector Gen 3, Type 2) • Mounting location: external brick wall • Switchboard/fuse box: located on the inside of the same wall (short cable run required through the wall) • Power supply: single phase • Cabling: to be run through the wall from the switchboard to the external mounting point * cabling to be supplied by you as any other item required to do the work. Requirements: • Must be a licensed, experienced electrician • Experience with EV charger installations preferred • Compliance with relevant electrical standards and any required certifications and sign offs

Looking for a licensed and insured electrician experienced with EV charging installations to install a charging point for a Lexus RX 450h+ in the basement car park of a strata property. Installation Required * Vehicle: Lexus RX 450h+ Plug-in Hybrid * Charging connection: Type 2 * Vehicle supports up to approximately 7 kW AC charging * Install a dedicated single-phase 32A circuit from the main switchboard to my parking space. * Install a new dedicated circuit breaker and all required protection at the main switchboard, compliant with current Australian electrical requirements. * Run the new cable from the main switchboard through the existing cable tray, continuing via suitable conduit along the basement wall/ceiling to the parking space. * Install a 32A isolation switch at the charging location. * Install a 15A switched socket outlet, similar to the one shown in the attached photo. * Complete all cabling, conduit, fittings, connections, testing and labelling required for the installation. Existing Installation to Follow EV charging electrical installations have already been completed for Units 2 and 4 in the building. I would like the new installation to follow the same route, layout and installation pattern as Units 2 and 4 wherever practical, to maintain consistency with the existing strata/building infrastructure. Important This is a strata property, so the work must be carried out by a suitably licensed and insured electrician and comply with applicable Australian Standards and NSW electrical requirements. Please include all required testing and provide the relevant electrical compliance/safety certificate upon completion. When quoting, please confirm whether your price includes cable, conduit, circuit protection, isolation switch, 15A outlet, labour, testing and certification.

I need to get a Tesla wall connector installed in my garage to charge an EV in a single phase connection. The garage is roughly 10 meters from the mains.

Looking for a licensed electrician to conduct a site assessment and provide a formal quote letter for strata approval in our Westmead apartment block. Prior to any physical work commencing, our strata committee requires a technical scope of work. The job is for the initial site assessment and strata quote letter ONLY. We require quotes for two distinct scenarios in our locked garage lot: Scenario 1: Installation of a standard, dedicated 15-Amp power outlet (GPO). Scenario 2: Full 7kW EV charger installation (including any load-management options if the switchboard capacity is tight) Requirements: *Must be a fully licensed electrician in NSW. *Must provide a formal written quote/letter outlining the proposed cable path, connection point (to our unit's meter), and a statement on switchboard capacity that we can submit to our owners corporation. *Please state clearly in your offer if your Airtasker bid covers your full call-out and assessment fee.

Looking for a qualified electrician with experience in install 22kw 3 phase ev wall charger.. I have the unit.. its being installed in my garage wall and on the other side only the wall is my electrical box.. see photos for install pictures and instructions.. need to install and test to make sure it working..

Install EV charger, it's a 7.4kw Autel charger supplied to me from BYD. Charger to be placed right next to or under electricity box in photos.

Ev charger installation only

Install EV charger, just install only. Parking area where main meter box is located around 25 meters. Need to install 32amp charger.

I’ll buy this charger, you have to install in my garage: https://www.evswitchstore.com.au/products/supercharger The install location is about 5m away from the meter board outside the garage

Install fast EV charger inside garage. Conduit available from meter box to garage.

I am looking for a NSW licensed electrician experienced in EV charging installations in apartment buildings / strata environments. Scope of work: Install a dedicated 50 A single-phase circuit from my unit meter (C50 main breaker) Install a weatherproof, lockable 50 A EV power outlet (IP66/IP67) in my allocated basement car park Run cabling through common property using approved surface conduit or cable tray Conduit must be sized to allow future upgrade to three-phase or higher capacity EV charging, without needing to rework common property Install 50 A MCB + 30 mA RCD protection All work to comply with AS/NZS 3000 Wiring Rules Provide a Certificate of Compliance on completion Materials: Provided by me: Weatherproof, lockable 50 A outlet Conduit sized for future 3-phase upgrade Any other specific cabling I supply (if advised by electrician) Provided / installed by electrician: MCB + RCD compatible with my DB Labour for wiring, connection, and installation Professional fixings, brackets, and cable trays as required Ensuring compliance and safety of all connections Important details: Apartment building in Toongabbie, Sydney Single-phase supply Cable routing through common property (neat, professional, strata-friendly installation required) Strata approval will be obtained prior to commencement Requirements: Current NSW Electrical Licence Experience with apartment / strata EV installations Ability to provide public liability insurance if requested Provide a clear quote and scope of works for labour only Please include in your offer: Your licence number Relevant experience with EV charger installations Confirmation you can oversize conduit for future 3-phase upgrade Estimated labour cost range Availability for site inspection Thank you.

Install Tesla wall connector charger and complete all associated electrical work

Licensed electrician with experience installing Tesla Gen 3 Wall Connectors on three-phase circuits, achieving 11 kW output (approx. 75 km of range per hour). At this Parramatta property, a new three-phase power connection must be installed, as the site currently only has a single-phase supply. The Tesla Wall Connector will be installed inside near the back door, located within 2 metres of the external meter box. We will supply the Tesla Wall Connector, but the electrician must supply all other required materials and components to complete the job to full 11 kW performance. It is essential that the installation delivers 11 kW output — no payment will be made if the job is completed below this standard. The installation must fully comply with Tesla specifications and Australian electrical safety regulations.

I need to install an ev charger which is 7 meters from the switch board, cable wise, it should use 12-15 meters. Installing the Zappi ev charger

Licenced electrician needed to install EV charger. Mains box is on opposite side of house to where charger needs to be installed. I will provide EV charger

I need a qualified electrician to install our EV charger on the wall and connect it to our fuse box

I need to install Single Phase BYD 7Kw wall charger in my parking of my apartment. I need to get approval from Strata so Electricition need to be licensed. I have charger available but need other materials like cables or switches.

Install single phase 32 amp circuit for purchased ev charger. Position of charger will be in between the two garage doors on the inside. Approximately 4 metres from power box. Will need isolator as well

Need a low cost EV Charger to be installed at home. Alternatively, happy with a weatherproof outdoor PowerPoint which can be locked and secured. Main board is on left side of house. Driveway is on right side of house. Prefer EV charger or PowerPoint to be on right side of house. Otherwise happy to have EV charger outlet on left hand side with the main board and an extended cable. Solar EV option offers are also welcome. I don’t have any materials. Price is indicative only. I welcome any offers.