Find local ev charger installers in Canberra

I need to get a 7kW single phase EV charger installed in my garage. I already have the charger. House has 3 phase supply. Switchboard is in the garage and has couple of spare slots for the new 32 Amp circuit to be put on. Need to run around 2m of conduit on the wall from the switch-board to the charger install location (conduit can be run from behind the battery shown in the picture). Charger installation location is shown in red box in the attached pic. No special smart integration needs to be done between the charger and battery/inverter.

Looking for a licensed electrician to install a 7kW single-phase EV charger in the garage of my house in Canberra. Scope: Install a 7kW (32A, single-phase) wall-mounted charger inside the garage Run a new dedicated circuit from the external switchboard to the charger, approx. 10m Supply and fit a dedicated circuit breaker and RCD protection as required Assess the switchboard and existing load, and advise if any upgrade is needed Test, commission and provide a certificate of electrical safety (ACT requirement) About the site: Switchboard is outside, about 10m of cable run to the charger location, including penetrating the garage wall Garage has an existing 15A outlet. Please quote a new dedicated 32A circuit and advise if any existing cabling is suitable Existing 6.6kW solar system, no battery Requirements: Licensed electrician, fully insured, ACT licence number provided Compliant with AS/NZS 3000 and ACT regulations Charger:I will supply a BYD charger Fixed-price quote including materials, labour, conduit and cable Please include in your offer: Total price and what it covers Earliest possible availability Anything that might add cost

I need a licensed electrician to run new wiring from my switchboard to my garage and install a dedicated 32A single-phase socket for charging an EV with the Mobile Connector. The cable run is about 15 metres. Job details New dedicated 32A circuit with correct breaker and RCD protection Cable route:roof space Socket type: 32A single-phase, IP66 [type to match my Tesla 32A adapter Materials I’ll supply all materials. Before accepting a quote, please send me your material list with cable size and type, breaker and RCD specs, conduit, and socket model so I can buy compliant items. Please include in your quote Labour cost and estimated time Confirmation that you’ll install customer-supplied materials Your ACT electrical licence number Certificate of electrical safety on completion

I want to get a new Geely Electric car charger installed in my Garage. There are 4 x 10 amp power points in Garage already. I want to ensure this can be installed with our current power supply at home. Car charger is 7kw single phase. Attaching a picture of charger and charger specifications along with our current house fuse box. Let me know how much this will cost or if you need more information.

Ev charger installation 7 kw charger single phase townhouse and installation in garage and meter is 4-5 meters away.

Looking for a fully licensed and insured electrician to install an EV wall charger on a fixed project basis at my property in Canberra & Surrounding areas. Project Details: • Charger Model: • Charger Supply: I have already purchased and supplied the unit. • Phase Type: Single-Phase / Three-Phase • Mounting Location: Inside the garage / On an external brick wall • Switchboard Distance: The main meter box/switchboard is approximately [e.g., 5 metres / 15 metres] away from the mounting spot. • Cable Path What the Project Scope Covers: 1. Securely mounting the EV charger unit. 2. Running a dedicated 32A circuit from the main switchboard to the charger with appropriate RCBO/RCD protection. 3. Testing, commissioning, and configuring smart/load-balancing settings (if applicable). 4. Supply of all necessary cabling, conduits, and electrical consumables. 5. Providing an official electrical Certificate of Compliance (e.g., CCEW in NSW) upon completion. Requirements: • Must be a registered, licensed electrician (please provide your licence number in your offer). • Prior experience with EV charger installations is highly preferred. • Compliance with AS/NZS 3000 electrical standards. Please provide your fixed-price & Extras for the total project, including your earliest availability.

I have a brand-new Geely 7kW Type 2 EV Home Wall Charger, which I will supply. My newly built house already has a dedicated EV charging outlet/connection installed in the garage by the builder. The EV circuit was installed as part of the original electrical installation and was confirmed by the builder/electrician at handover as being for EV charging. I am simply looking for a qualified/licensed electrician to connect the supplied Geely wall charger to the existing EV connection. Existing EV infrastructure The switchboard appears to have a dedicated EV circuit labelled “GARAGE N/L 15”, protected by a: Hager ADM432T RCBO 32A 3P+N (three-phase + neutral) 30mA Type A RCD protection 230–415V AC Hager's technical specifications confirm the ADM432T is a 4-pole, 3P+N, 32A Type A 30mA RCBO, which is consistent with the dedicated three-phase EV circuit installed at the property. The garage also has the dedicated EV connection/isolator already installed. Work required Please: 1. Inspect the existing EV connection and confirm it is suitable for the supplied Geely 7kW charger. 2. Connect and securely mount the Geely 7kW Type 2 wall charger to the existing EV circuit. 3. Reuse the existing EV circuit and protection — no new circuit is required unless you identify a compliance or capacity issue. 4. Test the installation and charger under load. 5. Confirm correct RCD/earthing operation. 6. Provide the required electrical compliance documentation/certificate on completion. I am not looking to have a new EV circuit installed. The house already has the EV infrastructure; I just need the supplied wall charger connected to it by a qualified electrician. Charger: Geely 7kW EV Home Wall Charger – Type 2 Customer supplies charger: Yes Existing EV outlet/circuit: Yes New circuit required: No — unless electrician determines existing installation is unsuitable after inspection Job: Connect, mount, test and certify.

EV Charger Installation Looking for a electrician to install my EV wall charger. The charger is already supplied, and the house already has a dedicated breaker and 3-phase power set up for an EV charger. I just need someone to install/connect the charger, test it, and make sure everything is working correctly and safely. Please send me your quote and availability.

Tesla charger installation single phase meter

Looking to Install EV charger in the garage 3 phase connection, licensed electrician required. The meter is on the opposite side of the garage. As in the picture.

Tesla charger installation in Garage

I got a new Zappi EV charger coming on Saturday 11:00 am. I am looking to install at home, for my byd seal. I have a solar connected ‘GOODWE’.. wondering if someone can do it..

Ev charger removal wall mounted Disconnect from the electric mains.

I need an ev charger installed. I already have the charger, just need to mounted and connected. It’s on the opposite side of the house from the meter box. It’s an evnex charger. Thanks

Need a quote to install an ev charger. Roughly 20m away from our circuit breaker.

Title: Install 7kW EV Charger (Ocular LTE Plus) – Canberra (Garage) Description: Looking for a licensed electrician to install a 7kW EV charger (Ocular LTE Plus) at my home in Canberra. Job details: * Charger: Ocular LTE Plus (7kW, single phase, tethered) * Location: Garage wall (front) * Switchboard: Located on the side of garage (very close) * House: Modern build * Power: Single phase, 100A main switch * Distance: Short cable run (approx. <7m) * There’s an access panel in the garage and the cables can easily go through the ceiling space (see picture provided). And the shelves can be moved out of the way. Scope of work: * Install and mount EV charger * Run dedicated 32A circuit from switchboard * Install appropriate breaker/RCBO (if required) * All wiring, conduit, and connections * Testing and commissioning * Compliance certificate (ACT required) Requirements: * Must be a licensed electrician (ACT) * Experience installing EV chargers preferred * Must provide compliance certificate on completion * Please confirm if you supply materials or I provide charger Optional (please quote separately if applicable): * Load assessment / load management setup (if needed) * Surge protection Timing: Flexible, but ideally within the next 2–3 weeks. Please include in your offer: * Total cost (labour + materials) * Any additional costs that may arise * Availability * Examples/photos of similar installs (if available) Thanks!

Looking for a electrician to install a 7kW EV wall charger at my property. The main breaker is already installed, so the job primarily involves connecting the charger and ensuring everything is set up safely and correctly. Scope of work: • Mount the wall charger (if required) • Connect the charger to existing wiring and breaker • Test and confirm proper operation • Ensure a safe, neat, and compliant installation This should be a quick and straightforward job since most of the electrical work is already there.

Electrician's cost to install a EV charger.

A new EV charger has been mounted on the garage wall and a holes drilled through for cabling. Charger requires connecting to the junction box, less than 1m away. There are spare connections on the junction box.

Previous electrician has wired all the way to an isolator switch inside the garage. The EV charger wall box will be installed next to the isolated switch. What will be the cost to connect up the isolator switch to the EV wall box. They are next to each other.