Find trusted local electricians in Parramatta

I need to run a new cable from meter to around 15 meters long. To install a new power point. New new circuit for that connection which can run a 2 freezer and a soft ice cream machine

I need an electrician to install lights and powerpoint to an attic space

Electrical work 1. Need 3 ceiling lights changed from hanging cord to flat to ceiling (lights supplied by owner). 2. Need replacement of existing double power point with central oven switch (power point provided by owner) 3. Need replacement of 2 double power points with USB ports (new power points to be provided by owner) 4.Need replacement of overseas power cord with Australian one 5. need TV aerial checked

No power going to the accessories. Bilge pumps, Sounder and lights. Boat is a 1990 quintrex fishabout. Not sure cost to diagnose and repair so open to offers to take a look and repair separately.

1. Remove 21 x old down lights and replace with new LED down lights. This was previously done with 4 lights in the kitchen area before I moved in. 2. Remove ceiling light in main bedroom and replace with ceiling fan. 3. Fix oven top exhaust fan and light which was installed a year ago but doesn’t work. If someone can please firstly come to do an initial inspection, I will then buy the compatible lights and fan and then removal and installation job can be done after that. Will do cash.

Replace two pool lights shown in photo. One is still working, one has stopped due to end of life.

I need a level 2 electrician to relocate power line to go from main pole to top of the house and back into the power box . Electricity has been disconnected by Asgrid. No approvals required. Also need main box power upgraded . Please let me know prices .

Install three power points in apartment built in 2018

Seeking a Level 2 ASP for a consumer mains upgrade at a residential property in Lidcombe. The current 6mm consumer mains are insufficient for a new 42kW battery storage system and 6kW PV array. I require an upgrade to 16mm² XLPE mains to meet AS/NZS 3000 standards and ensure adequate current carrying capacity for high load off peak charging. The site is currently equipped with an EDMI Atlas Mk7A smart meter (NMI available upon request). The scope of work includes the mains upgrade and a full switchboard compliance check to prepare for a transition to a Time of Use EV energy plan. Please include your NSW Electrical License, ASP Category 1/4 credentials, and confirm that a CCEW will be issued upon completion. Point of attachment is easily accessible.

Site visit and quote for commercial electrical upgrade $50. I need a licensed electrician to install two new dedicated circuits for a commercial food stall in Harris Park. The existing setup (one 10A outlet) is insufficient for the equipment load. ​The equipment includes: ​1 x Acai Softserve Machine (10A / approx. 2400W continuous). ​1 x Gelato Display Unit (195W). ​1 x 256L Chest Freezer (170W). ​Requirements: ​Circuit 1: A dedicated 10A (or 15A) weatherproof outlet for the Acai machine. ​Circuit 2: A 10A double weatherproof outlet on a separate circuit for the freezer and gelato display. ​All work must be compliant with AS/NZS 3000 and include RCD (Safety Switch) protection.

Need 4 x down lights in the living area old style house ceiling. This will require a separate swith right now we have 2 way switch board only. We are in Granville.

Install: 1x Eufy C1 Video Bell - wired (Existing PowerPoint) 1x Eufy E30 video Cam (PowerPoint exists right under where the camera needs to go).

I’m looking for a licensed electrician to install an outdoor weatherproof power point for a new heat pump. Scope of work: • Install 1 x outdoor weatherproof GPO (power point) on the external wall in the location I’ll show you. • Existing internal power point directly behind the desired location, and • Another existing power point approx. 10 metres away on the same wall outside. • Power board is 15 meters from the desired spot. Preferably a dedicated/isolated 15A power run via conduit from power board, which is approximately 15 meters away. • Outdoor power point unit will be supplied by you. • You to supply all other materials: cable, conduit/trunking, fixings, etc. • Test the circuit, ensure it’s RCD‑protected, and provide any required certificate of electrical safety/compliance. Requirements: • Must be a licensed electrician (please include licence number in your offer). • Experience with external/weatherproof power points. • Clean, tidy work and must make good any small penetrations made. Timing: • Flexible on day and time – ideally within the next 1–2 weeks. Please let me know: • Your approximate total price (labour + materials, excluding the power point itself), and • When you’re available.

Replace one double powerpoint electrical socket. The buttons seem to get stuck while operating the socket. Please replace with appropriate electrical socket. New electrical socket should be on hand. Please post your best offer.

Need electrician for noise in fan.

Light switche fell into the case

I need an electrician to change one downlight in our bathroom from hard wired to plug and play. Located in Lidcombe. I will reimburse the cost of the light in cash so the offer is only for labour.

Bathroom downlight not working. Replaced bulb, no difference. Sometimes when the switch is turned on, the light flickers. Have tried reseating into socket. May be issue with transformer? The cable is connected to SAL Mini Electronic Transformer.

Ecogenica model Eg-215f, Failed capacitor or tripped safety switch issue. 15mm tempering valve has been replaced same issue. Recall for where the control panel inside the heat pump unit hasn't been touched just out of warranty 2yrs & 3 months now. Warranty 2 yrs. Need quote on repairs. Thanks in advance. Not a emergency situation.

Replace 2 x bathroom extractor fans, replace 3 x batten light fittings, fix pond electrical fitting (in garden). We will provide the stuff (fans and lights etc). Happy to pay hourly rate.