Find trusted local electricians in Parramatta

I am looking for a licensed electrician to replace three existing hardwired smoke alarms at my home. The offer is only for the installation. I will purchase or pay for the smoke alarms separately if you provide. You need to provide any additional materials required.

There is a hole caused by hitting on the wall. also the electrical switch seem to be a bit broken, working at the moment, but needs to be replaced similar to existing one.

Currently the bathroom has one wall switch which turns on both the ceiling light and exhaust fan simultaneously. I would like this changed to two separate switches so the light and exhaust fan can be operated independently, as I would like to be able to keep exhaust fan on for longer without having to keep light on Existing light and exhaust fan are already installed and working. Looking for a licensed electrician to supply/install the appropriate 2-switch plate and complete any required wiring. Unit apartment in Parramatta

Level 2 electrician to pull up breaker MSB room - Silverwater 2128

Need 2 ceiling fans with light installed in my 2 bedrooms, to replace the existing ceiling LED lights.

there is water leaking from the ceiling when the A/C is turned on. Suspecting blockage from condensate pipe to clear. Issue in an apartment in parramatta. Available before 9am or after 4:30pm weekdays.

Full Installation of LED conduit and LED Strip lights for outdoor floting stairs

I’m looking for someone who can handle plumbing, electrical work, and general handyman jobs. The tasks include: - Unblocking a sink - Reattaching and securing a cabinet corner bracket that has come loose - Tightening a loose toilet seat - Refitting the air conditioner cover - Reattaching a towel hook to the wall

I need a licensed electrician in NSW to replace three existing power points. I will supply the new power points. Thank you.

NBN port connection has fallen from plate into hole in wall. Urgently needs to be reinstated so NBN box can be reconnected. Wifi extender also needs to be connected once repair completed.

Two tasks - Replace existing led light to batten light - Remove existing chimney and install new chimney Please give quote separately if you can do only one task. If you can do both, pls quote with visiting, Airtasker and your service fee together

I have a single downlight in the dining room that pops on/off and sometimes not at all. I've changed globes - that's not the issue. I also have an exhaust fan in an ensuite that does not work.

Need licensed electrician to inspect, repair and replace, if required 1 DC ceiling fan . Replacement fan will be provided. Height of installation approx 2.7 m

Rebooking task between James and Manogran

Install 2x1.2m long LED strips under bathroom cabinets(Power is available inside the cabinet) Replace 13 existing socket style downlights with plugged in DL's Replace existing GPO to recessed. All supply and Install.

I’m looking for a qualified and licensed electrician to supply and install 3 new light fittings, including globes, at my property. There are: * 1 light fitting in the garage * 2 light fittings in the carport/driveway * The existing fittings are the older fluorescent-style fittings shown in the photos. * Two of the existing lights are no longer working. * I would like all three fittings replaced with suitable new LED light fittings, including the appropriate globes. Location: Garage and carport/driveway areas – photos provided showing the exact locations and existing fittings. Requirements: ✅ Must be a licensed/qualified electrician ✅ Must be appropriately insured ✅ Supply 3 suitable replacement LED light fittings and globes ✅ Test all three lights to ensure they are working correctly I’m happy to consider recommendations for suitable fittings, but would prefer good-quality, practical LED fittings rather than anything overly expensive. Please provide your quote including labour and supply of the three fittings/globes. I’m flexible with timing and can arrange a suitable day/time. Photos of all three existing light fittings and their locations are attached.

Charger supplied by me (Tesla Wall Connector Gen 3, Type 2) • Mounting location: external brick wall • Switchboard/fuse box: located on the inside of the same wall (short cable run required through the wall) • Power supply: single phase • Cabling: to be run through the wall from the switchboard to the external mounting point * cabling to be supplied by you as any other item required to do the work. Requirements: • Must be a licensed, experienced electrician • Experience with EV charger installations preferred • Compliance with relevant electrical standards and any required certifications and sign offs

I need a licensed electrician to replace two existing hard-wired LED downlights with two new 90mm LED downlights. I will supply the two new downlights. The electrician will need to supply and install two suitable plug bases, connect the new lights and test that they are working correctly. Please include all labour, plug bases and Airtasker fees in your offer. Photos of the existing fittings are attached.

Brick unit. Need to replace switch board and remove redundant wiring, check existing outlets etc If someone can come today that would be amazing