Find trusted local electricians in Parramatta

To install a kitchen chandelier into place with electrical

I require a licensed electrician (with current NSW registration if applicable) to carry out the following work: Connect four ceiling fans (each with integrated lighting) to the existing lighting circuits/final subcircuits. The fans are already assembled and securely mounted to the ceiling joists using appropriate fan-rated brackets/supports. The previous light fittings have been removed, leaving the existing ceiling roses or junction boxes ready for connection. Each fan includes a light kit, and the supplied remote control receiver/handset allows independent operation of the fan motor and the lights (i.e. separate switching/control via remote). Supply and install two double GPOs (general purpose outlets / power points) in the attic/roof space. This will involve running appropriate TPS cable from the nearest existing circuit or distribution point in the roof space (or as determined on site), installing two flush-mounted or surface-mounted double socket outlets in suitable locations, complete with architrave brackets or wall boxes, attaching to a single timber frame/joist as required, and making safe connections back to the existing cabling. The attic has a catwalk/platform with carpet underlay, allowing comfortable and safe access without risk of falling through the ceiling. Please see the attached photos showing the existing ceiling wiring/rose and the fan's wiring diagram/label for reference.

Looking for plumber to install gas continued flow hot water system. Need to provide certificate of installation Job to be done as soon as possible

Hi I want to get some power points installed in the house . I also want a matrix panel to be installed ( on a wall so that onyx stone can be installed on it ) Moving ceiling pendants closer to the wall

Need an electrician to separate the light and exhaust fan to a 2 gang switch so I can control both individually. Need it done for 3 bathrooms.

I need a certified electrician to addi down light in my 3 drm townhouse and also ad the ac in bedrooms.

I have solar panels that have mesh fitted as a pigeon has found a way in. I need the pigeon removed and the mesh repaired.... double story house Lidcombe

I am looking for electrician to change the light in the kitchen , need to upgrade,the new light is Luce Bella 30cm Alabaster Oyster Light - Due date: Flexible

I’m after a quote for two jobs at my home: 1. relocating an existing light switch to a different position on the wall, and 2. fixing a bathroom lighting issue where one bathroom’s lights only work when the other bathroom’s lights are on. Could you please let me know an estimated cost (or range), whether it’s fixed price or hourly, and any call-out fee?

Hi I need someone to install an outdoor power supply socket in the wall twin switch. I have one inside the building, and need outside point just at the back of it. So no need for any wiring etc. I have attached photos, could explain. Its a sparky job, would prefer you are certified and you supply that outdoor plug twin switch. So please provide your quotes with labour and material separation. Thanks ( if price is good then there is another similar point on the other end of balcony. I would include that too)

I have a power socket with a stuck charger in it, need to replace it preferably one with a usb ports with the power outlets.

Seeking a Level 2 ASP for a consumer mains upgrade at a residential property in Lidcombe. The current 6mm consumer mains are insufficient for a new 42kW battery storage system and 6kW PV array. I require an upgrade to 16mm² XLPE mains to meet AS/NZS 3000 standards and ensure adequate current carrying capacity for high load off peak charging. The site is currently equipped with an EDMI Atlas Mk7A smart meter (NMI available upon request). The scope of work includes the mains upgrade and a full switchboard compliance check to prepare for a transition to a Time of Use EV energy plan. Please include your NSW Electrical License, ASP Category 1/4 credentials, and confirm that a CCEW will be issued upon completion. Point of attachment is easily accessible.

Site visit and quote for commercial electrical upgrade $50. I need a licensed electrician to install two new dedicated circuits for a commercial food stall in Harris Park. The existing setup (one 10A outlet) is insufficient for the equipment load. ​The equipment includes: ​1 x Acai Softserve Machine (10A / approx. 2400W continuous). ​1 x Gelato Display Unit (195W). ​1 x 256L Chest Freezer (170W). ​Requirements: ​Circuit 1: A dedicated 10A (or 15A) weatherproof outlet for the Acai machine. ​Circuit 2: A 10A double weatherproof outlet on a separate circuit for the freezer and gelato display. ​All work must be compliant with AS/NZS 3000 and include RCD (Safety Switch) protection.

Need 4 x down lights in the living area old style house ceiling. This will require a separate swith right now we have 2 way switch board only. We are in Granville.

Install: 1x Eufy C1 Video Bell - wired (Existing PowerPoint) 1x Eufy E30 video Cam (PowerPoint exists right under where the camera needs to go).

I’m looking for a licensed electrician to install an outdoor weatherproof power point for a new heat pump. Scope of work: • Install 1 x outdoor weatherproof GPO (power point) on the external wall in the location I’ll show you. • Existing internal power point directly behind the desired location, and • Another existing power point approx. 10 metres away on the same wall outside. • Power board is 15 meters from the desired spot. Preferably a dedicated/isolated 15A power run via conduit from power board, which is approximately 15 meters away. • Outdoor power point unit will be supplied by you. • You to supply all other materials: cable, conduit/trunking, fixings, etc. • Test the circuit, ensure it’s RCD‑protected, and provide any required certificate of electrical safety/compliance. Requirements: • Must be a licensed electrician (please include licence number in your offer). • Experience with external/weatherproof power points. • Clean, tidy work and must make good any small penetrations made. Timing: • Flexible on day and time – ideally within the next 1–2 weeks. Please let me know: • Your approximate total price (labour + materials, excluding the power point itself), and • When you’re available.

Replace one double powerpoint electrical socket. The buttons seem to get stuck while operating the socket. Please replace with appropriate electrical socket. New electrical socket should be on hand. Please post your best offer.

Need electrician for noise in fan.

Light switche fell into the case