Find trusted local electricians in QLD

The downlight has been flickering. Probably because of the cyclone water leakage

Looking for an electrician to assist with: - new addition of a light switch - installation of a bathroom exhaust fan

Hi, We’re not entirely sure what the best solution is, but as shown in the photos, our Starlink is currently positioned in a way that prevents the back door from closing properly. We’re looking for an electrician who can install an external power socket and properly set up the Starlink, including routing the cable so it can enter the house without obstructing the door. Thanks

Replace 2 existing outdoor light fittings with new (supplied) and install 1 supplied security camera (location of AC wired camera will be immediately on other side of same wall from AC power outlet for garage door opener but on the outdoor side of the wall rather than indoor side (see images, at top of garage doors in the space between them).

I need a 75’ TV mounted to the wall along with TV brackets

Install 1 X wired security camera (supplied)and replace 2 x existing light fittings with new ones (supplied) in the same position. The security camera can go next to the lights so hopefully you can piggy back the wiring. Saturday 28th or Sunday 29th please.

My smoke alarm is beeping and showing a low alarm. I need someone to replace the batteries. Smoke alarm is a Brooks

We are seeking a qualified Plumber to attend our property in Mount Low, QLD 4818. Please note that this initial budget is for a site visit only. The scope of the visit includes inspecting the plumbing issues, taking photos/videos, and conducting a flood test and pressure test (including static pressure testing) to determine whether the leak is related to waterproofing, plumbing, or another source. Following the inspection, a detailed quote for the required repairs will be needed. The known plumbing issues include a leaking shower, a blocked bathroom sink, and a faulty kitchen sink mixer. Kind regards, Ajay

I need an electrician to go to a property and do a lock-out on the main powerboard to ensure that the power is fully isolated prior to doing a reno. Easy access and quick job, with power isolation needed with one outside GPO working (or add GPO at box)

Install 3-phase reference wiring + Shelly energy monitors in switchboard (licensed electrician) Scope: - Install 1 × 3-pole DIN MCB (metering/reference circuit) - Install 5 × Shelly 3EM-63W Gen3 units inside switchboard - Provide clean L1 / L2 / L3 voltage reference distribution to all Shellys - Connect: - Neutral to neutral bar - Earth to earth bar - Install and route CT clamps (3 per device = 15 total) on nominated circuits - Neatly terminate, label, and secure all wiring - Test and verify correct operation (phase alignment and readings) Requirements: - 3-phase switchboard (Hager gear) - Must be fully compliant (AS/NZS 3000) - No double-lugging of breaker terminals - Preference for clean, scalable solution (e.g. terminal blocks or equivalent) Notes: - All Shelly devices supplied - Switchboard has available DIN space - Looking for a neat, professional install — not a quick patch job Please include: - Confirmation of licence - Approach you’d take (brief) - Availability Location: Kenmore

Need a service completed on a portable generator

Need licensed electrician to disconnect one electricity plug prior to building renovation being carried out. Will pay for any parts required separately.

Need a light switch isolated for cabinet removal.

Had building report done on house. Had deck built and have electrical wires under the deck that needs to be removed and a report generated to say they were done sale of property.

Inspect and certify fire alarms in a two bedroom rental flat

Hi there I need old hard wired smoke alarms disconnected and new alarms installed. I have already purchased the new alarms. I also need a compliance cert for the new alarms. Also a hanging down light to be either disconnected or replaced with a new one.

One of the clips which holds the light cover in place has snapped. I believe the entire fixture and light cover needs to be replaced If you're able to just replace the clip with something similar that will also work :)

One of my house smoke alarms is faulty, it’s going off and I have to take out the battery to stop it. I tried buying new battery but that didn’t work. So I need a qualified professional to fix it.

Hi, I am the owner of an apartment in Brisbane City and need a licensed electrician for two small tasks: ​1. Replace 1x Double Power Point: I have already purchased the new Hager Silhouette power point (see photo). It is a like-for-like replacement. ​2. Replace 1x Kitchen Downlight: One integrated LED downlight is out (see photo). Please provide a new LED downlight fitting and install it for me. ​IMPORTANT: The existing lights are WARM WHITE (yellowish light). Please ensure the replacement matches this color temperature exactly. ​Requirements: ​Must be a licensed electrician. ​Provide an Electrical Safety Certificate upon completion. ​Quote should be all-inclusive (labor, call-out fee, and the cost of the new Warm White LED fitting).

I have 5 light switches that need replacing. I have the new light switches ready to go. I need a licensed electrician to complete the job.