Find trusted local electricians in East Melbourne

Looking for a licensed electrician to complete the following jobs at my home in Balwyn North, Victoria. 1. Install a smart gang switch on the staircase lights (see photo 5). 2. Install an IXL Luminate (36611) in the ensuite ceiling on the 2nd floor (see photos 1 & 2). 3. On the backyard wall, replace the existing junction box with a Philips Hue outdoor wall light (see photos 3 & 4). 4. Move 2x PowerPoints behind the bedhead approximately 30–40cm to the left/right. We’ll take care of the plastering. Timing: Any weekday afternoon after 4:30pm is good, or anytime Wednesday 16/9 or Friday 18/9. Any questions, just ask. Price is just placeholder, quote on time required. Thx, Mark

I need down-lights, GPO and aircon done for a skin clinic. Only licensed electrician as need certificate when complete.

I've got approximately four days of electrical work involving replacement of switches, GPOs and downlights, plus new LED strips, exhaust fans, feature lights and towel heaters. I will be supplying the fittings. I'd like to agree a fixed labour price for the complete installation. I'm allowing up to four 8-hour days, with any additional work agreed before proceeding. The electrician would be appropriately licensed and delivery would include testing and certification.

Installing a brand new wiring loom on my big bear chopper. Some of it is done but I’m dumb when it comes to electrical. Please help me 🤣

Install Tesla Charger (Wall connector gen3) by a certified ev electrician Double story house Switch board is on one side and parking is on the other side Issue a Certificate of Electrical Safety (COES) upon completion.

Job Description: Looking for a fully licensed and insured electrician to install a dedicated 15A outdoor power point for a plug-in spa, along with required equipotential bonding for nearby metal downpipe and window. Scope of Work: • 15A Dedicated Outlet: Supply and install a 15A weatherproof power point near the spa location. • Circuit Breaker: Install a dedicated safety switch in the main switchboard and run a single-phase dedicated circuit to the spa outlet. • Equipotential Bonding: Perform equipotential bonding on the nearby metal downpipe and metal window frame. • Testing & Certification: Test installation and provide a Certificate of Electrical Safety upon completion. Site Details & Access: • Easy access path from the main switchboard to the spa location with minimal to no drilling required. Contractor Requirements: • Must be a fully qualified and licensed electrician. • Include labour, materials, and compliance certificate in your quote. Please attach or mention your electrical license details when submitting your offer.

Need electrician to install downlights and disconnect some switches and move/install some GPOs etc in a renovation project. You need to be Licenced electrician and available for a a few weeks to support the project from the start till the end. Preferably access to another person (electrician/apprentice) to help out with works. Certificate will be required upon completion of works

Looking for a licensed electrician to supply and install concealed LED strip lighting in the following areas: 1. Under the overhead kitchen cabinets to illuminate the benchtop. 2. Inside the three new shelves on both sides of the fireplace. I would like a neat, high-end finish using recessed aluminium channels with diffusers, so the LED strips and wiring are concealed. The shelving may need to be cut or routed to create the lighting channels. Please recommend the most suitable lighting system and colour temperature. Warm white lighting is preferred, approximately 3000K. The task must include: - Suitable LED strips, aluminium channels, diffusers, drivers and other materials - Cutting/routing the required lighting channels - Concealed wiring where reasonably possible - Connection to suitable switches or existing power - Complete installation, testing and clean-up - Electrical work completed by a licensed Victorian electrician Please advise whether you can complete both the electrical work and the required cabinet/shelf routing. Photos show the current kitchen and fireplace shelving. Budget is $500. Please specify clearly in your offer what materials and work are included.

We have a factory being re installed into a factory in box hill south. We need someone to source and install 4 batton lights like in the photos to replicate what was previously there. Would need 2 visits one to rough in the cable and next to install the lights. Have existing lights to put back in. Photos are of the original office. We have the frame back up just now.

Replace existing double power point. Both sockets have very loose plug retention. Existing wiring/location unchanged. Please supply and install a standard double GPO. Must be a licensed Victorian electrician and provide Certificate of Electrical Safety.

I’m looking for a licensed electrician to replace an existing ceiling pendant light in my apartment. I have already purchased the exact replacement pendant light, so no parts are required—just installation. The existing light has a cracked shade and the replacement is the same model, so it should be a straightforward, quick job for a qualified electrician. Requirements: * Must be a licensed electrician. * Please bring any tools required for installation. * Please provide a tax invoice on completion of the work (or within 24 hours), as this is required for my tenancy records. Please let me know your availability and your quote. Thank you.

I’m looking for a licensed electrician to inspect and repair two ceiling lights. * Light 1 (Stairwell): Located above the stairwell at approximately 5 metres high. The light flickers continuously. The bulb has already been replaced, so it may be a wiring, LED driver or fitting issue. * Light 2 (Bedroom): The ceiling light does not turn on at all. The stairwell light is approximately 5 metres high, so you’ll need a suitable extension ladder and your own tools. Please only apply if you are a licensed electrician.

I wish to add a spotlight to an existing line of 12v garden lights. And need a sensor added to my front porch. I have both the spotlight and sensor, so only requires installing and a bit of cable.

Installation of a wall light Flos Maap W1 light. Refer to info and installation details: https://professional.flos.com/en/global/stories/stories-maap/ https://flos.com/en/wo/maap/M-Maap.html?itemListName=Wall&itemListID=wall&spareparts=false

Urgent Licensed Electrician Needed Today – Disconnect Built-in Oven & Cooktop + Install Power Points I’m looking for a licensed electrician who can come ASAP (today). I am renovating my kitchen and need the following work completed: 1. Safely disconnect and isolate the power to an existing built-in electric oven/cooktop so it can be removed today. The appliance is hardwired (not plugged into a power point). 2. Install/relocate several power points for my new kitchen layout (we can discuss exact locations on site). This is the first stage of the renovation. After the plumber disconnects the gas and the old appliances are removed, I will also need a licensed electrician to return to connect the new oven and other electrical work, so there may be additional work available. Requirements * Must be a licensed electrician * Available today / ASAP * Please bring all necessary tools * Please let me know your earliest arrival time. The oven needs to be disconnected urgently because the plumber is waiting to disconnect the gas line and remove the existing appliance.

None of the lights in the house are working. The “Protected Light” breaker trips immediately when it is reset. Looking for a licensed electrician to attend, fault find, and repair the issue on the spot if possible. Please check the lighting circuit, light switches, wiring terminations, and switchboard breaker/RCBO to identify and fix the fault. It may be a faulty cable, loose termination, light switch, or breaker, but I need the exact cause diagnosed and repaired. Please only respond if you’re able to carry out the repair, not just provide a quote for a full switchboard replacement. If major work is genuinely required, please explain why before proceeding.

Electrician Required – Replace & Install Power Points & Light Switches (Single-Level Home) Scope: Looking for a licensed electrician for the following: -New double power points = 6 -Replace single power points = 4 -Replace double power points = 10 -Replace triple power point = 1 -Replace quad light switch = 1 -Single PP replaced with double PP = 1 -Replace standard single light switches = 4 -Replace single dimmer light switches = 3 -Relocate triple light switch = 1 -Relocate double power point = 1 Single-level home. Easy access with driveway parking. Power on. All work to comply with Australian Standards. Please quote your total price including labour, materials, fittings. Happy to answer any questions or provide further photos/floor plan.

Need a licensed electrician to install: 2 pendant lights (60-80 cm diameter each) 5 wall lights Replacing existing lights with no new cable run.

I have 3 bedrooms that need down lights

Install 65 inch Samsung photo frame TV on wall, Plaster board wall, electrician work required as hole drill to fit wire behind plaster board