Find a local software expert in Melbourne

Monitor Arm Installation & Cable Management – Docklands (Tomorrow, 4 August, 12:00 PM) Looking for someone to help set up our office in Docklands. Job includes: * Install 6 dual-monitor arms (12 monitors in total). * Monitors are already on the desks – you only need to unpack and assemble the monitor arms, then mount the existing monitors. * Complete cable management for all 6 workstations including these monitors & power cables which is nearby * Connect the power cables and neatly organise all cabling. What’s provided: * All monitor arms. * All cable management materials and accessories. * All electrical work has already been completed. Then remove rubbish (if any) to nearby bin Location: Docklands, VIC Preferred time: Tomorrow, Tuesday 4 August, starting at 12:00 PM. Please let me know your experience with monitor installations and cable management, and provide a quote. Thank you.

Looking for someone to install a dual monitor arm (XCD Gas Bracket Dual Arm - from JBHIFI) onto a desk in Melbourne CBD (Bourke Street, near Southern Cross Station) The job involves clamp mounting the base, attaching two arms, and mounting two monitors - one 34" ultrawide (~8.5kg) and one smaller secondary. Basic cable tidy up after. Photo of the desk attached. Including the BACK of the desk where the clamp will attach. No drilling because clamp method is preferred. Ideally this coming week, most days are available - just needs to be scheduled ahead of time 🗓️

I need a Cat6a data cable installed in my house. Around 30 - 40 metres in distance. It needs to run from the front bedroom when the NBN box is to the back of the house which is the living room. Access to the roof is a trap door and you will need a ladder to access it. The front part of the house was built approxiamately in the 1880's and back part of the house is a renovation from about 15 years ago.

Hi, how are you? How much does it cost you to assemble a gamer computer in my house? I'm in Southbank.

Cable modem and TV points next to existing power points in both bedrooms, duplicating/extending existing cabling in the dining room.

A student can get free Micosoft version. Need to download and install in my new Mac book neo! Maybe training a little bit skill ! One hour

Hi there, I borrowed a friends MacBook Pro. 2015, to use for study, but…in resetting and trying to upgrade to the most recent and available operating system, I managed to completely wipe the hard drive / operating system. I don’t need to recover any files or cloud or ye olde Time Machine but I do need to have more than a blank screen. The task needs to be done in person. Thank you.

We have a logi conference system consisting of: - Logi meet up bar https://www.logitech.com/en-au/products/video-conferencing/conference-cameras/meetup-conferencecam.html - Logitech room mate https://www.logitech.com/en-au/products/video-conferencing/room-solutions/roommate.html - Logitech TAP IP logitech.com/en-au/products/video-conferencing/room-solutions/tap-ip.html Its all installed however we are needing an IT specialist to come in and get it all working. Proper plug and play connected to Microsoft accounts for the team to use.

Have a firewalla gold SE. Unable to install despite multiple efforts with Firewalla support. Experience with Firewalla installation or similar will be useful - knowledge of router and bridge modes will be useful. Also have home mesh wifi system which may help. Rates negotiable especially if task is deemed more challenging.

I have an existing build with an rtx 3060 and a b550m pro vdh. I recently was given an rtx 3080 but had thrown out my power supply cables. I have purchased a new power supply and need someone to install both and sanity check its working after.

Updated - 20/05/26 1. Remove 6 existing monitor stands from desks - pictured black (unscrew and detach monitors from current stands, set aside) 2. Attach 6 new monitor arms to desks - pictured White 3. Unbox 6 new monitors and attach to the new arms (VESA mount, screws included) 4. Adjust monitor height, tilt and position for each workstation 5. Reconnect all cables (power, DisplayPort/HDMI – existing cables will be in place) 6. Confirm each monitor is working before finishing 7. Dispose of or stack unboxed packaging neatly **What you'll need:** - A screwdriver (Phillips head) – a drill/driver would speed things up - Comfortable working at a desk height - Patience for repeating the same steps 6 times! Melbourne CBD **Estimated time:** 1.5–2 hours

From the gateway switch, run cat6 ethernet cable throughout the single storeyed house and connect the existing LAN ports and install new LAN ports

i need help in downloading a free software on my laptop.i seem not to be able to do it.i will need assistance in doing this

Macbook is lagging and trackpad is loccked. Pro M1 model. Need help repairing it.

Install the second screen and ensure it’s working for my work-from-home desk setup

Hi there! I’m looking for someone experienced in computer maintenance to deep clean my PC (inside and outside) and reinstall Windows to fix a recurring blue screen error. I’ve already run diagnostics — no hardware faults were found, so it’s most likely a software or system file issue. Tasks include: Opening and cleaning dust from inside the PC (fans, motherboard, GPU, etc.) Backing up or safely handling my existing files (if possible) Reinstalling Windows (I can provide the license key or ISO) Ensuring system runs smoothly after reinstall Requirements: Must have experience with Windows installation and PC troubleshooting Bring your own tools and cleaning equipment (compressed air, etc.) Location: Essendon West Preferred time: Afternoon 3/11

We are looking to strengthen our wifi connection in our front room. Wifi router is located in the back room. We have not purchased the system, as we are not sure which one to buy. Price negotiable.

Looking for someone to go onsite and install a Yealink W70B base station. The task involves connecting the device to the network, ensuring it powers on, and confirming it obtains an IP address.

I need someone to install the pc

We’re looking for someone experienced with CNC machines and Easel (by Inventables) to help us set up and configure our Genmitsu 3020-PRO MAX for aluminum engraving and cutting. ⚙ What we need: • Assist with connecting Easel to the Genmitsu 3020-PRO MAX • Configure machine settings in Easel (work area, spindle, material setup) • Set up appropriate cut settings (feed rate, plunge rate, depth per pass, spindle speed) for aluminum. 💻 Requirements: • Familiar with Easel software • Knowledge of GRBL controllers and CNC setup • Experience with Genmitsu or similar desktop CNC machines