Find experienced local carpenters in Kingsford NSW

Rehang two doors so they swing from the opposite side of the door. Patch doors and frame. Minor repairs to floor boards - would require sourcing suitable recycled timber to match

Need To Install a timber or aluminium approx 1540 mmx 565mm window around all 4 internal sides of window

Looking for someone to remove and cut down a timber pole in my backyard in Sydney. I do not need the concrete footing removed — I just want the pole cut below ground level so the area can be filled and levelled afterwards. Job includes: * Dig down slightly around pole if needed * Cut pole below ground level * Remove/dispose of top section of pole * Leave area safe and backfill with soil. I have extra soil The pole is treated pine and fairly thick, so you’ll likely need appropriate cutting tools (reciprocating saw/chainsaw etc). Easy backyard access. Please bring your own tools.

Build a frame on wall and fix bunnings lattice panels. Approximately 4 M. See existing panels and wall for further panels.

Joiner/carpenter to build and fit a small wooden door to replace current door/entry to space under my house. Door is approx 1.5m/1m in size and will require hinges and padbolt

Instal six tall cabinets of wide 30cm, height 180 cm, depth 37 cm, hanging on wall

We are preparing a kitchen cabinet for an installation of a dishwasher. We have removed the doors of the cabinet. We will require the bottom of the cabinet and top bit of timber to be removed to allow space for the dishwasher. The bottom and top parts we want removed are fixed in tightly and the top part of timber is glued. This may require a pry bar and/or electric saw.

We need to replace the timber balustrades at our house with either new timber or aluminium for the upstairs deck. The timber has rotten and starting to break.

Sand timber seat (1.4m) , as well as small timber deck in children’s play area (1.4x1.4m) and 2.0m narrow connecting timber section.

I need this custom plinth made for my reception at my shop Approx 1100 height and 500 wide with inside compartment for iPad and eftpos etc on the other side. Stone on the top and no LED on the bottom. I have the paint that I can paint it with. I just need the structure made

I would like someone to come and look at our wooden deck area (approx 4m x 5.5m). We have had it sanded and painted in the past and there seems to be some weak planks that might need replacing or reinforcing before we have a party at home in October.

I have what appears to be a section of exterior ceiling or soffit cladding has come loose or is sagging, potentially due to water damage, poor fastening, or structural movement. I would like someone to be able to access the damage, and quote up the repair (or if it part of a bigger issue - to advise). Please note - budget is call out fee only. The job will need to be accessed on site.

The chair has pegs that connect the back to the base, but glue will not be enough, needs screws as well. So you nee to have strong wood glue, screws and screwdriver.

Carpenter required. Must have own tools and vehicle, transport. House Renovation.

I need an experienced carpenter or handyman to repair and replace external timber around my house in Kingsford, NSW 2032. Scope of Work: - Replace damaged timber sections on the roof eaves and fascias. - Repair or replace the wooden access door at the base of the house. - Address any rotting or structural issues in the timber sections. - Ensure all new materials are primed and ready for painting. Material Selection Advice Needed: - I am open to replacing the damaged timber with either: - Treated timber (to maintain the traditional look). - Alternative low-maintenance materials (e.g., composite wood, fiber cement, or PVC). - Please provide advice on the best material for durability and cost-effectiveness. Details: - Photos of the damaged areas are attached. - Please include a quote for both materials and labour. -Let me know your availability and experience with similar repair jobs. Looking for someone reliable, with expertise in timber and material alternatives, who can provide a competitive quote.

Build and install two timber wall shelves, mount a whiteboard under them and reattach slats to wooden bed frame

I’m looking for someone to CNC cut 4 sheets of ply wood. I have the drawing ready and I can supply the ply wood

I’m looking for somone to cnc cut some plans I have for a tear drop campervan It is 4 sheets all together

I need a carpenter or handyman to fit out kitchen cabinet doors. The cabinets are existing and just need doors See pics below

To build an understair cabinet. No drawers or pull outs. Only 2 compartments with 2 doors each (divided vertically as shown in blue highlights on my proposed design drawing). Would be great to add 1 shelf (shown in red line). Would like the doors & the right side panel in semi gloss white polyurethane.